The DOI matches its Crossref record.
Low Strain Dynamic Properties of Artificially Cemented Sand
Abstract
Torsional resonant column tests are conducted to study the effect of artificial cementation on low strain dynamic properties of Monterey No. 0 sand. Artificially cemented specimens are prepared using 1, 2, and 4% Portland cement by weight. Specimens were tested after 14 days of curing. It is determined that maximum shear modulus increased and damping ratio decreased with an increase in the degree of cementation. The maximum dynamic shear moduli increased due to corresponding increases in stiffness coefficients. The stiffness ratio defined as the stiffness of cemented to uncemented specimens varied with the degree of cementation and density. Dense specimens rendered higher stiffness ratios. The stiffness ratio was correlated to unconfined compressive strength and the cohesion intercept from CIU tests. Degradation of modulus ratio with strain ratio depended upon both the degree of cementation and density. Decay of modulus was more predominant in stiffer specimens. Cementation led to a decrease in damping ratio at all levels of strain.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
DeJong, J. T., Mortensen, B. M., Martinez, B. C., & Nelson, D. C. (2010) · Ecological Engineering · doi:10.1016/j.ecoleng.2008.12.029 · Cited by 1,763
Microbially Induced Cementation to Control Sand Response to Undrained Shear
DeJong, J. T., Fritzges, M. B., & Nüsslein, K. (2006) · Journal of Geotechnical and Geoenvironmental Engineering · doi:10.1061/(asce)1090-0241(2006)132:11(1381 · Cited by 1,582
The Mechanical Properties of Fly-Ash-Stabilized Sands
Simatupang, M., Mangalla, L. K., Edwin, R. S., Putra, A. A., Azikin, M. T., Aswad, N. H., & Mustika, W. (2020) · Geosciences · doi:10.3390/geosciences10040132 · Cited by 61
Metadata
- Authors
- Acar, Y. B., & El‐Tahir, E. A.
- Venue
- Journal of Geotechnical Engineering
- Published
- 1986-11
- Volume
- 112
- Issue
- 11
- Pages
- 1001-1015
- ISSN
- 0733-9410 (ISSN-L)
- 1944-8368
- DOI
- 10.1061/(asce)0733-9410(1986)112:11(1001
- OpenAlex
- W2024611345
- Cited by
- 160
- References
- 0
- FWCI
- 2.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Low Strain Dynamic Properties of Artificially Cemented Sand. https://app.cochat.ai/papers/10.1061/(asce)0733-9410(1986)112:11(1001
- The paper
- Acar, Y. B., & El‐Tahir, E. A. (1986). Low Strain Dynamic Properties of Artificially Cemented Sand. Journal of Geotechnical Engineering. https://doi.org/10.1061/(asce)0733-9410(1986)112%3A11(1001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.