Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 257

The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.

Optimum Design of Absorber for MDOF Structures

Hadi, Muhammad N. S., Arfiadi, Yoyong · 1998 · Journal of Structural Engineering
DOI 10.1061/(asce)0733-9445(1998)124:11(1272

Abstract

This paper discusses the optimum design of tuned mass damper (TMD) for seismically excited building structures. In the design process the multi degree of freedom structures are considered so that it makes improvement to the available design procedures so far, where usually only single mode model is considered. The H2 norm of the transfer function from the external disturbance to a certain regulated output is taken as a performance measure of the optimization criterion. The genetic algorithm, which has been successfully applied in many applications, is used to find the optimum value of TMD parameters. The numerical examples for optimum parameters of TMD for multi degree of freedom structures are presented to show the effectiveness of this design procedure. It is shown that by using the proposed procedure, the optimum value of the mass damper can be determined without specifying the modes to be controlled. A comparison is also made to the Den Hartog and Warburton approaches.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1061/(asce)0733-9445(1998)124:11(1272)

Cites

29 of 29 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 29 references

Research works printed but not linked: 13

  1. 10.1061/(ASCE)0733-9445(1997)123:7(943) · doi:10.1061/(asce)0733-9445(1997)123:7(943
  2. Clough R. W. and Penzien J. (1975). Dynamics of structures . McGraw-Hill Kogakusha Tokyo Japan.
  3. Den Hartog J. P. (1956). Mechanical vibration . McGraw-Hill New York.
  4. 10.1061/(ASCE)0733-9445(1996)122:12(1394) · doi:10.1061/(asce)0733-9445(1996)122:12(1394
  5. 10.1061/(ASCE)0733-9399(1995)121:9(994) · doi:10.1061/(asce)0733-9399(1995)121:9(994
  6. 10.1016/0045-7949(91)90402-8 · doi:10.1016/0045-7949(91)90402-8
  7. 10.1016/S0141-0296(96)00074-0 · doi:10.1016/s0141-0296(96)00074-0
  8. Kobori, T., Koshika, N., Kazuhiko, Y., and Ikeda, Y.(1991). “Seismic-response-control structure with active mass driver system. Part 1: design.”Earthquake Engrg. and Struct. Dynamics, 20, 135–149.
  9. Lublin L. Grocott S. and Athans M. (1996). “H 2 (LQG) and H ∞ control.” The control handbook W. S. Levin ed. CRC Press Inc. Boca Raton Fla.
  10. Posbergh T. A. Trimboli M. S. and Duke J. P. (1991). “A control formulation for vibration absorbers.” Proc. Am. Control Conf. American Automatic Control Council 3 2481–2482. Boston Mass. · doi:10.23919/acc.1991.4791850
  11. 10.1061/(ASCE)0733-9445(1992)118:3(723) · doi:10.1061/(asce)0733-9445(1992)118:3(723
  12. 10.2514/3.21249 · doi:10.2514/3.21249
  13. Van de Vegte J. and Hladun A. R. (1973). “Design of optimal passive vibration controls by optimal techniques.” J. Dynamic Systems Measurement and Control 427–434. · doi:10.1115/1.3426745

Cited by

See all 257

Metadata

Authors
Hadi, M. N. S., & Arfiadi, Y.
Venue
Journal of Structural Engineering
Published
1998-11
Volume
124
Issue
11
Pages
1272-1280
ISSN
  • 0733-9445 (ISSN-L)
  • 1943-541X
DOI
10.1061/(asce)0733-9445(1998)124:11(1272
OpenAlex
W2062441493
Cited by
257
References
29
FWCI
10.42
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Optimum Design of Absorber for MDOF Structures. https://app.cochat.ai/papers/10.1061/(asce)0733-9445(1998)124:11(1272
The paper
Hadi, M. N. S., & Arfiadi, Y. (1998). Optimum Design of Absorber for MDOF Structures. Journal of Structural Engineering. https://doi.org/10.1061/(asce)0733-9445(1998)124%3A11(1272

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.