Trends of Fall Accidents in the U.S. Construction Industry
The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
Fall accidents constitute a crucial type of accident in the construction industry. This study investigates fall accidents that occurred in the United States between 1997 and 2012. Using the 20,997 construction industry accidents recorded in the Occupational Safety and Health Administration (OSHA) database, this study examines the frequency and trend of fall accidents. Additionally, by using data from 9,141 fall accidents, this study investigates various dimensions of fall accidents, such as fall height, fall location, and fall protection, and types of industry and projects where fall accidents occurred. The analyses and subsequent findings are discussed as follows: First, the percentage of fall accidents from four major accident types (fall, struck by, caught in or between, and electrocution) has been increased substantially. Second, in terms of project type, residential housing projects experienced a higher portion of fall accidents. Third, more than 80% of fall accidents occurred from a height of less than 9.1 m (30 ft), and only 11% of fall accident victims were properly equipped with fall protection. These findings serve to alert safety agencies of the need to diagnose the current state of fall accidents and to revise the policies and regulations to reduce these figures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Analysis of Construction Worker Fall Accidents
Huang, X., & Hinze, J. (2003) · Journal of Construction Engineering and Management · doi:10.1061/(asce)0733-9364(2003)129:3(262 · Cited by 405
Park, J., Kim, K., & Cho, Y. K. (2017) · Journal of Construction Engineering and Management · doi:10.1061/(asce)co.1943-7862.0001223 · Cited by 300
Factors influencing the risk of falls in the construction industry: a review of the evidence
Hu, K., Rahmandad, H., Smith‐Jackson, T., & Winchester, W. (2011) · Construction Management and Economics · doi:10.1080/01446193.2011.558104 · Cited by 164
Fatal falls among Hispanic construction workers
Dong, X. S., Fujimoto, A., Ringen, K., & Men, Y. (2009) · Accident Analysis & Prevention · doi:10.1016/j.aap.2009.06.012 · Cited by 158
Albert, A., Hallowell, M. R., & Kleiner, B. M. (2014) · Construction Management and Economics · doi:10.1080/01446193.2014.929721 · Cited by 116
Comparison of risk factors for falls from height between commercial and residential roofers
Sa, J., Seo, D., & Choi, S. D. (2009) · Journal of Safety Research · doi:10.1016/j.jsr.2008.10.010 · Cited by 96
Fatal work-related falls from roofs
Suruda, A. J., Fosbroke, D. E., & Braddee, R. W. (1995) · Journal of Safety Research · doi:10.1016/0022-4375(94)00026-3 · Cited by 67
Worker health chartbook, 2004.
(2004) · doi:10.26616/nioshpub2004146 · Cited by 62
Automated Detection of Near-miss Fall Incidents in Iron Workers Using Inertial Measurement Units
Yang, K., Aria, S., Ahn, C. R., & Stentz, T. L. (2014) · ASCE Construction Research Congress (CRC) · doi:10.1061/9780784413517.096 · Cited by 58
Steel Erection Fatalities in the Construction Industry
Beavers, J. E., Moore, J. R., & Schriver, W. R. (2009) · Journal of Construction Engineering and Management · doi:10.1061/(asce)0733-9364(2009)135:3(227 · Cited by 56
Cited by
Elesawy, A., Mohammed Abdelkader, E., & Osman, H. (2024) · Eng · doi:10.3390/eng5010019 · Cited by 24
“Further, it was found that 70% of fall accidents in 2017 occurred because of workers not wearing personal protective equipment (PPE) on sites, as per a study conducted by Kang et al. [1].”
Metadata
- Authors
- Kang, Y., Siddiqui, S., Suk, S. J., Chi, S., & Kim, C.
- Venue
- Journal of Construction Engineering and Management
- Published
- 2017-08
- Volume
- 143
- Issue
- 8
- ISSN
- 0733-9364 (ISSN-L)
- 1943-7862
- OpenAlex
- W2610419604
- Cited by
- 160
- References
- 12
- FWCI
- 12.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Trends of Fall Accidents in the U.S. Construction Industry. https://app.cochat.ai/papers/10.1061/(asce)co.1943-7862.0001332
- The paper
- Kang, Y., Siddiqui, S., Suk, S. J., Chi, S., & Kim, C. (2017). Trends of Fall Accidents in the U.S. Construction Industry. Journal of Construction Engineering and Management. https://doi.org/10.1061/(asce)co.1943-7862.0001332
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.