The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Framework of Automated Construction-Safety Monitoring Using Cloud-Enabled BIM and BLE Mobile Tracking Sensors
Abstract
Construction sites need to be monitored continuously to detect unsafe conditions and protect workers from potential injuries and fatal accidents. In current practices, construction-safety monitoring relies heavily on manual observation, which is labor-intensive and error-prone. Due to the complex environment of construction sites, it is extremely challenging for safety inspectors to continuously monitor and manually identify all incidents that may expose workers to safety risks. There exist many research efforts applying sensing technologies to construction sites to reduce the manual efforts associated with construction-safety monitoring. However, several bottlenecks are identified in applying these technologies to the onsite safety monitoring process, including (1) recognition and registration of potential hazards, (2) real-time detection of unsafe incidents, and (3) reporting and sharing of the detected incidents with relevant participants in a timely manner. The objective of this study was to create and evaluate a low-cost automated safety monitoring system to assist in the construction-safety monitoring process. This paper presents a framework for this safety monitoring system as a cloud-based real time on-site application. The system integrates Bluetooth low-energy (BLE)-based location detection technology, building information model (BIM)-based hazard identification, and a cloud-based communication platform. Potential unsafe areas are defined automatically or manually in a BIM model. Real-time worker locations are acquired to detect incidents where workers are exposed to predefined risks. Then, the safety monitoring results are instantly communicated over the cloud for effective safety management. Through a real-world construction site case study, the system successfully demonstrated the capability to detect unsafe conditions and collect and analyze the trajectories of workers with respect to potential safety hazards. The results indicate that the proposed approach can assist in the construction site monitoring process and potentially improve site safety.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Safety Hazard Identification on Construction Projects
Carter, G., & Smith, S. D. (2006) · Journal of Construction Engineering and Management · doi:10.1061/(asce)0733-9364(2006)132:2(197 · Cited by 477
Workplace hazard identification and management: The case of an underground mining operation
Bahn, S. (2013) · Safety Science · doi:10.1016/j.ssci.2013.01.010 · Cited by 243
Albert, A., Hallowell, M. R., & Kleiner, B. M. (2014) · Journal of Construction Engineering and Management · doi:10.1061/(asce)co.1943-7862.0000790 · Cited by 187
CoSMoS: A BIM and wireless sensor based integrated solution for worker safety in confined spaces
Riaz, Z., Arslan, M., Kiani, A. K., & Azhar, S. (2014) · Automation in Construction · doi:10.1016/j.autcon.2014.05.010 · Cited by 181
Park, J., Marks, E., Cho, Y. K., & Suryanto, W. (2016) · Journal of Construction Engineering and Management · doi:10.1061/(asce)co.1943-7862.0001031 · Cited by 159
Self-citationError modeling for an untethered ultra-wideband system for construction indoor asset tracking
Cho, Y. K., Youn, J. H., & Martinez, D. (2009) · Automation in Construction · doi:10.1016/j.autcon.2009.08.001 · Cited by 116
Self-citation
Cited by
Bao, Y., Tang, Z., Li, H., & Zhang, Y. (2019) · Structural Health Monitoring · doi:10.1177/1475921718757405 · Cited by 616
Cloud computing in construction industry: Use cases, benefits and challenges
Bello, S. A., Oyedele, L. O., Akinade, O. O., Bilal, M., Davila Delgado, J. M., Akanbi, L. A., Ajayi, A. O., & Owolabi, H. A. (2021) · Automation in Construction · doi:10.1016/j.autcon.2020.103441 · Cited by 452
Saka, A. B., Oyedele, L. O., Akanbi, L. A., Ganiyu, S. A., Chan, D. W. M., & Bello, S. A. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101869 · Cited by 161
Chen, H., & Luo, X. (2019) · Advanced Engineering Informatics · doi:10.1016/j.aei.2019.100959 · Cited by 133
Metadata
- Authors
- Park, J., Kim, K., & Cho, Y. K.
- Venue
- Journal of Construction Engineering and Management
- Published
- 2017-02
- Volume
- 143
- Issue
- 2
- ISSN
- 0733-9364 (ISSN-L)
- 1943-7862
- OpenAlex
- W2511538593
- Cited by
- 300
- References
- 6
- FWCI
- 25.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Framework of Automated Construction-Safety Monitoring Using Cloud-Enabled BIM and BLE Mobile Tracking Sensors. https://app.cochat.ai/papers/10.1061/(asce)co.1943-7862.0001223
- The paper
- Park, J., Kim, K., & Cho, Y. K. (2017). Framework of Automated Construction-Safety Monitoring Using Cloud-Enabled BIM and BLE Mobile Tracking Sensors. Journal of Construction Engineering and Management. https://doi.org/10.1061/(asce)co.1943-7862.0001223
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.