Mechanical Properties of Southern Pine Cross-Laminated Timber
The DOI matches its Crossref record.
Abstract
Cross-laminated timber (CLT) is a novel wood building material suitable for floor, roof, and wall assemblies in low- and mid-rise construction as an alternative to concrete and steel. CLTs are considered to provide good seismic resistance, fast erection times, carbon sequestration, and a significant reduction in greenhouse gas emissions over other construction materials. Southern pine is an abundant forest resource; yet it has not been commercially used for CLT manufacturing. The purpose of this paper was to measure the bending and shear properties of CLT material fabricated using southern pine lumber compared to product standards. Bending strength, bending stiffness, shear strength, resistance to shear by compression loading strength, and resistance to delamination were measured according to product standards, and test results were compared with values given in the standards. Bending tests were conducted on jointed beams due to test length requirements. Bending strength, bending stiffness, and wood failure in resistance to shear by compression loading tests exceeded the published values for the published values, while resistance to delamination did not meet the established criteria. The resistance to delamination results may have been affected by the uncontrolled moisture content of the lumber during fabrication of the CLTs. The application of glued laminated lumber standards to CLT products requires clarification in the orientation of loading directions for the resistance to shear by a compression loading test and the measurement of all four sides of the resistance to delamination specimens. Increased scrutiny of moisture content quality control is highly encouraged for the production of CLTs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Lan, K., Kelley, S. S., Nepal, P., & Yao, Y. (2020) · Environmental Research Letters · doi:10.1088/1748-9326/abc5e6 · Cited by 95
Rose, C. M., Bergsagel, D., Dufresne, T., Unubreme, E., Lyu, T., Duffour, P., & Stegemann, J. A. (2018) · Sustainability · doi:10.3390/su10114118 · Cited by 84
“Germany and Switzerland [57–59]; large-leaf beech [60], Southern pine [61,62], hybrid poplar [63] and tulipwood [64,65] in North America; poplar [66] and eucalyptus [67] in China; and Japanese cedar [68].”
BackgroundCherry, R., Manalo, A., Karunasena, W., & Stringer, G. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.293 · Cited by 57
Flexural and shear performance of CLT panels made from salvaged beetle-killed white spruce
Ma, Y., Wang, X., Begel, M., Dai, Q., Dickinson, Y., Xie, X., & Ross, R. J. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124381 · Cited by 13
Zhang, Z., & Lan, K. (2022) · Journal of Renewable Materials · doi:10.32604/jrm.2022.017506 · Cited by 12
Metadata
- Authors
- Hindman, D. P., & Bouldin, J. C.
- Venue
- Journal of Materials in Civil Engineering
- Published
- 2015-09
- Volume
- 27
- Issue
- 9
- ISSN
- 0899-1561 (ISSN-L)
- 1943-5533
- OpenAlex
- W2077363849
- Cited by
- 73
- References
- 0
- FWCI
- 3.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical Properties of Southern Pine Cross-Laminated Timber. https://app.cochat.ai/papers/10.1061/(asce)mt.1943-5533.0001203
- The paper
- Hindman, D. P., & Bouldin, J. C. (2015). Mechanical Properties of Southern Pine Cross-Laminated Timber. Journal of Materials in Civil Engineering. https://doi.org/10.1061/(asce)mt.1943-5533.0001203
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.