The DOI matches its Crossref record; 107 of the 107 references it cites were found in a registry or an index.
Dynamic life cycle carbon and energy analysis for cross-laminated timber in the Southeastern United States
Open accessAbstract
Life cycle assessment (LCA) has been used to understand the carbon and energy implications of manufacturing and using cross-laminated timber (CLT), an emerging and sustainable alternative to concrete and steel. However, previous LCAs of CLT are static analyses without considering the complex interactions between the CLT manufacturing and forest systems, which are dynamic and largely affected by the variations in forest management, CLT manufacturing, and end-of-life options. This study fills this gap by developing a dynamic life-cycle modeling framework for a cradle-to-grave CLT manufacturing system across 100 years in the Southeastern United States. The framework integrates process-based simulations of CLT manufacturing and forest growth as well as Monte Carlo simulation to address uncertainty. On a 1-ha forest land basis, the net greenhouse gas (GHG) emissions range from −954 to −1445 metric tonne CO 2 eq. for a high forest productivity scenario compared to −609 to −919 metric tonne CO 2 eq. for a low forest productivity scenario. All scenarios showed significant GHG emissions from forest residues decay, demonstrating the strong needs to consider forest management and their dynamic impacts in LCAs of CLT or other durable wood products (DWP). The results show that using mill residues for energy recovery has lower fossil-based GHG (59%–61% reduction) than selling residues for producing DWP, but increases the net GHG emissions due to the instantaneous release of biogenic carbon in residues. In addition, the results were converted to a 1 m 3 basis with a cradle-to-gate system boundary to be compared with literature. The results, 113–375 kg CO 2 eq. m−3 across all scenarios for fossil-based GHG emissions, were consistent with previous studies. Those findings highlight the needs of system-level management to maximize the potential benefits of CLT. This work is an attributional LCA, but the presented results lay a foundation for future consequential LCAs for specific CLT buildings or commercial forest management systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“GHG emissions and energy demand for processing mixed live softwood in sawmills are consistent with the values for softwood lumber preparation in previous studies [55, 73-76].”
From Life-cycle carbon footprint and total production potential of cross-laminated timber from California’s wildland-urban interface (2025) · cites this paper as [76]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wood handbook: wood as an engineering material
Ross, R. J., & USDA Forest Service., F. P. L. (2010) · doi:10.2737/fpl-gtr-190 · Cited by 2,510
Environmental management. Life cycle assessment. Requirements and guidelines
(2015) · doi:10.3403/30152732u · Cited by 1,730
U.S. Billion-Ton Update: Biomass Supply for a Bioenergy and Bioproducts Industry
Downing, M., Eaton, L. M., Graham, R. L., Langholtz, M. H., Perlack, R. D., Turhollow Jr, A. F., Stokes, B., & Brandt, C. C. (2011) · doi:10.2172/1023318 · Cited by 1,004
Impact of torrefaction on the grindability and fuel characteristics of forest biomass
Phanphanich, M., & Mani, S. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.08.028 · Cited by 892
Environmental management — Life cycle assessment — Requirements and guidelines
(2006) · doi:10.5555/iso14044:2006 · Cited by 885
Cross laminated timber (CLT): overview and development
Brandner, R., Flatscher, G., Ringhofer, A., Schickhofer, G., & Thiel, A. (2016) · European Journal of Wood and Wood Products · doi:10.1007/s00107-015-0999-5 · Cited by 832
Applying multi-objective genetic algorithms in green building design optimization
Wang, W., Zmeureanu, R., & Rivard, H. (2005) · Building and Environment · doi:10.1016/j.buildenv.2004.11.017 · Cited by 726
Life cycle greenhouse gas emissions and energy analysis of prefabricated reusable building modules
Aye, L., Ngo, T., Crawford, R. H., Gammampila, R., & Mendis, P. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2011.11.049 · Cited by 466
U.S. Billion-Ton Update. Biomass Supply for a Bioenergy and Bioproducts Industry
none (2011) · doi:10.2172/1219219 · Cited by 461
Research works printed but not linked: 3
- Patterson, 1988, Bulk density of southern pine logs, Forest Prod. J., 38, 36
- Wagner, 1993, Low lumber recovery at southern pine sawmills may be due to misshapen sawlogs, Forest Prod. J., 43, 53
- Zavala, 1995, The effect of log length and lumber thickness over-allowance on lumber recovery, Forest Prod. J., 45, 41
Cited by
Impact of climate change on biodiversity and food security: a global perspective—a review article
Muluneh, M. G. (2021) · Agriculture & Food Security · doi:10.1186/s40066-021-00318-5 · Cited by 645
Emerging Engineered Wood for Building Applications
Ding, Y., Pang, Z., Lan, K., Yao, Y., Panzarasa, G., Xu, L., Lo Ricco, M., Rammer, D. R., Zhu, J. Y., Hu, M., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00450 · Cited by 326
Self-citationAdvances in lignocellulosic feedstocks for bioenergy and bioproducts
Sulis, D. B., Lavoine, N., Sederoff, H., Jiang, X., Marques, B. M., Lan, K., Cofre-Vega, C., Barrangou, R., & Wang, J. P. (2025) · Nature Communications · doi:10.1038/s41467-025-56472-y · Cited by 263
Self-citationCross-laminated timber for building construction: a life-cycle-assessment overview
Younis, A., & Dodoo, A. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104482 · Cited by 175
Zhang, B., Lan, K., Harris, T. B., Ashton, M. S., & Yao, Y. (2023) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2221840120 · Cited by 36
Self-citation
Metadata
- Authors
- Lan, K., Kelley, S. S., Nepal, P., & Yao, Y.
- Affiliations
- North Carolina State University (US)
- Forest Products Laboratory (US)
- Yale University (US)
- Corresponding author
- Yao, Yuan
- Venue
- Environmental Research Letters
- Publisher
- IOP Publishing
- Published
- 2020-12-01
- Volume
- 15
- Issue
- 12
- Pages
- 124036
- ISSN
- 1748-9326 (ISSN-L)
- OpenAlex
- W3096689326
- Cited by
- 95
- References
- 107
- Citations by year
- 2026: 5 · 2025: 18 · 2024: 13 · 2023: 16 · 2022: 13 · 2021: 27 · 2020: 3
- FWCI
- 5.30
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (vor, 3 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 3 d)
- Locations
- Environmental Research Letters (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- U.S. Endowment for Forestry & Communities, Inc. (Phase 1)
- National Institute of Standards and Technology (70NANB18H277)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Life Sciences › Agricultural and Biological Sciences › Forestry › Forest Management and Policy
- Life Sciences › Agricultural and Biological Sciences › Forestry › Wood Residue Utilization and Solid Biofuels
- Keywords
- cross-laminated timber, greenhouse gas emissions, forest management, forest residues, mill residues, energy recovery, biogenic carbon, forest growth modeling, Monte Carlo uncertainty analysis, cradle-to-grave, cradle-to-gate, southeastern United States
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dynamic life cycle carbon and energy analysis for cross-laminated timber in the Southeastern United States. https://app.cochat.ai/papers/10.1088/1748-9326/abc5e6
- The paper
- Lan, K., Kelley, S. S., Nepal, P., & Yao, Y. (2020). Dynamic life cycle carbon and energy analysis for cross-laminated timber in the Southeastern United States. Environmental Research Letters. https://doi.org/10.1088/1748-9326/abc5e6
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.