The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Tensile Strain Hardening Behavior of PVA Fiber-Reinforced Engineered Geopolymer Composite
Abstract
This paper is aimed to improve the mechanical properties (namely compressive and tensile strengths) of a recently developed fly ash-based engineered geopolymer composite (EGC) with relatively low-concentration activator combinations. In this regard, four different activator combinations (including two Na-based solutions and one K-based activator solution, and one lime-based activator combination in the form of powder) were used to develop the fly ash-based EGCs exhibiting strain hardening behavior under uniaxial tension. Randomly oriented short polyvinyl alcohol (PVA) fibers (2% v/v) were used to reinforce the relatively brittle low-calcium (Class F) fly ash-based geopolymer matrix. The matrix and composite properties of the developed fly ash-based EGCs [including workability of the fresh matrix, density, compressive strength, matrix fracture properties (comprising elastic modulus, fracture toughness, and composite crack tip toughness), and uniaxial tensile behavior] were evaluated. A counterpart conventional engineered cementitious composite (ECC) with a water-to-cement ratio corresponding to the activator solution to fly ash ratio of the EGCs was also made for comparison. Experimental results revealed that in fly ash-based EGCs, the use of Na-based activator combination composed of 8.0 M NaOH solution (28.6% w/w) and Na2SiO3 solution (71.4% w/w) with a SiO2/Na2O ratio of 2.0 is highly beneficial in terms of lower cost, higher compressive strength, higher matrix fracture properties, and superior uniaxial tensile behavior compared to the other three activator combinations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Kong, D. L. Y., & Sanjayan, J. G. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.017 · Cited by 985
Self-citation
Cited by
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
Lao, J.-C., Huang, B.-T., Fang, Y., Xu, L.-Y., Dai, J.-G., & Shah, S. P. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.107075 · Cited by 281
Metadata
- Authors
- Nematollahi, B., Sanjayan, J., & Ahmed Shaikh, F. U.
- Venue
- Journal of Materials in Civil Engineering
- Published
- 2015-10
- Volume
- 27
- Issue
- 10
- ISSN
- 0899-1561 (ISSN-L)
- 1943-5533
- OpenAlex
- W2065194648
- Cited by
- 205
- References
- 1
- FWCI
- 22.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tensile Strain Hardening Behavior of PVA Fiber-Reinforced Engineered Geopolymer Composite. https://app.cochat.ai/papers/10.1061/(asce)mt.1943-5533.0001242
- The paper
- Nematollahi, B., Sanjayan, J., & Ahmed Shaikh, F. U. (2015). Tensile Strain Hardening Behavior of PVA Fiber-Reinforced Engineered Geopolymer Composite. Journal of Materials in Civil Engineering. https://doi.org/10.1061/(asce)mt.1943-5533.0001242
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.