Theoretical and Experimental Evaluation of Two Roadway Piezoelectric-Based Energy Harvesting Prototypes
The DOI matches its Crossref record.
Abstract
This paper presents the results of a theoretical and experimental study aiming to develop a stress-based roadway energy harvesting system. It describes two prototypes using piezoelectric elements. Prototype I consisted of 4, 8, and 16 8-mm-diameter cylindrical piezoelectric elements sandwiched between two copper plates. Prototype II consisted of a stack of 11 50-mm-diameter piezoelectric elements connected in parallel by alternating their polarities. Basic piezoelectric theory suggests that the relationship between power output and stress is nonlinear. Finite-element (FE) analysis shows a dependency of the power output of a cylindrical piezoelectric unit on loading frequency. The experimental evaluation included testing the prototypes in a universal testing machine under controlled temperature conditions. In addition, Prototype II was subjected to repetitive loads using an asphalt pavement analyzer without observing any loss in power output. Three-dimensional dynamic FE simulations were performed to determine the optimum installation depth of an energy harvesting module in an asphalt concrete pavement structure. Assuming moderate traffic levels and installation in the right-wheel path only, the energy output estimated per Prototypes I and II was 360 and 171 W-h annually. This technology shows promise in powering self-standing data acquisition systems or light-emitting diode (LED) lights in rural areas where there are no electrical power lines roadside.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wang, H., Jasim, A., & Chen, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.125 · Cited by 494
A critical review of roadway energy harvesting technologies
Gholikhani, M., Roshani, H., Dessouky, S., & Papagiannakis, A. T. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114388 · Cited by 259
Self-citationHarvesting kinetic energy from roadway pavement through an electromagnetic speed bump
Gholikhani, M., Nasouri, R., Tahami, S. A., Legette, S., Dessouky, S., & Montoya, A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.060 · Cited by 91
Self-citationFabrication and performance of Tile transducers for piezoelectric energy harvesting
Liu, Z., Ding, G., Wang, J., Cai, G., Qin, X., & Shi, K. (2020) · AIP Advances · doi:10.1063/5.0002400 · Cited by 26
Preparation and performance study of a new type of Tile transducer for roadway applications
Wang, J., Cai, Y., Liu, Z., Ding, G., Cai, G., & Fu, H. (2020) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x20942571 · Cited by 17
Metadata
- Authors
- Roshani, H., Jagtap, P., Dessouky, S., Montoya, A., & Papagiannakis, A. T.
- Venue
- Journal of Materials in Civil Engineering
- Published
- 2018-02
- Volume
- 30
- Issue
- 2
- ISSN
- 0899-1561 (ISSN-L)
- 1943-5533
- OpenAlex
- W2769012208
- Cited by
- 78
- References
- 0
- FWCI
- 5.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Theoretical and Experimental Evaluation of Two Roadway Piezoelectric-Based Energy Harvesting Prototypes. https://app.cochat.ai/papers/10.1061/(asce)mt.1943-5533.0002112
- The paper
- Roshani, H., Jagtap, P., Dessouky, S., Montoya, A., & Papagiannakis, A. T. (2018). Theoretical and Experimental Evaluation of Two Roadway Piezoelectric-Based Energy Harvesting Prototypes. Journal of Materials in Civil Engineering. https://doi.org/10.1061/(asce)mt.1943-5533.0002112
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.