CoChat

Fabrication and performance of Tile transducers for piezoelectric energy harvesting

Open access

The DOI matches its Crossref record; 22 of the 23 references it cites were found in a registry or an index.

Abstract

In recent years, pavement piezoelectric energy harvesting has become one of the most promising road energy harvesting system clean energy sources. However, it is difficult for existing piezoelectric transducer structures to meet road power generation requirements. In this study, ceramic grinding and polishing techniques were used to make curved piezoelectric ceramic units with controllable curvatures. A new type of Tile transducer for roadway applications was developed in combination with an elastic metal base. Under the action of traffic load, the Tile transducer was subject to both vertical stress and a horizontal tearing force. Laboratory tests were performed on Tile transducers with simply supported and fixed boundary conditions, and the effects of concentrated and uniformly distributed loads on energy harvesting efficiency were analyzed. When the excitation frequency was 6 Hz and the load was 0.7 MPa, the output power of the Plane transducer was 0.23 mW, while that of the Tile transducer was 24.5 times as large at 5.65 mW. The ultimate compressive yield strength of a single Tile transducer could reach 2.18 kN, and the load limit was 1.5 kN at an excitation frequency of 10 Hz. This meets traffic load requirements. The open circuit voltage peak did not decrease substantially when 360 000 cyclic loading processes were performed. This indicated that Tile transducer structural performance was stable and that the transducer was durable. Based on the test results, an effective Tile transducer packaging method is proposed for application in road power generation systems.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1063/5.0002400

Cites

22 of 22 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 22 references

Cited by

See all 28

Metadata

Authors
Liu, Z., Ding, G., Wang, J., Cai, G., Qin, X., & Shi, K.
Affiliations
Wenzhou University (CN)
Corresponding author
Wang, Jun
Venue
AIP Advances
Published
2020-04-01
Volume
10
Issue
4
ISSN
2158-3226 (ISSN-L)
OpenAlex
W3016525260
Cited by
26
References
23
Citations by year
2026: 1 · 2025: 5 · 2024: 3 · 2023: 3 · 2022: 7 · 2021: 7
FWCI
2.09
Type
journal article
Language
en
Open access
Licence
Locations
  • AIP Advances (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Foundation for Innovative Research Groups of the National Natural Science Foundation of China (51978534, 51622810)
  • The Zhejiang Province Natural Foundation Projects of China (LR18E080001 and Number LY18E080027)
  • Primary Research and Development Plan of Zhejiang Province (2018C03038)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies
  • Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
  • Physical Sciences › Engineering › Mechanics of Materials › Ultrasonics and Acoustic Wave Propagation
Keywords
piezoelectric energy harvesting, traffic load, concentrated and distributed loads, boundary conditions, output power, durability, cyclic loading

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Fabrication and performance of Tile transducers for piezoelectric energy harvesting. https://app.cochat.ai/papers/10.1063/5.0002400
The paper
Liu, Z., Ding, G., Wang, J., Cai, G., Qin, X., & Shi, K. (2020). Fabrication and performance of Tile transducers for piezoelectric energy harvesting. AIP Advances. https://doi.org/10.1063/5.0002400

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.