The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Cyclic Behavior of CLT Wall Systems: Experimental Tests and Analytical Prediction Models
Open accessAbstract
An experimental program was performed at IVALSA Trees and Timber Institute on single and coupled cross-laminated (CLT) wall panels with different anchoring systems and different types of joints between adjacent panels. The mechanical properties of CLT walls were assessed and are critically discussed in the paper. The connector layout and the design of the screwed vertical joints were found to markedly affect the overall behavior of the structural system. The in-plane deformations of CLT panels were almost negligible, whereas concentration of forces and deformations mainly occurred in the connections. Advanced analytical models for nonlinear pushover analysis of CLT wall systems were developed and verified against test results. The models take into account all stiffness and strength components of connectors, as well as the bending and shear deformation of the panels. A parametric study of CLT wall systems with different aspect ratios and wall segmentation was performed, showing that segmentation of CLT walls decreases their stiffness and strength but significantly improves their deformation capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
SOFIE project – 3D shaking table test on a seven‐storey full‐scale cross‐laminated timber building
Ceccotti, A., Sandhaas, C., Okabe, M., Yasumura, M., Minowa, C., & Kawai, N. (2013) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.2309 · Cited by 388
Self-citationCyclic behaviour of typical metal connectors for cross-laminated (CLT) structures
Gavrić, I., Fragiacomo, M., & Ceccotti, A. (2014) · Materials and Structures · doi:10.1617/s11527-014-0278-7 · Cited by 286
Self-citationPerformance of a 2-Story CLT House Subjected to Lateral Loads
Popovski, M., & Gavric, I. (2016) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0001315 · Cited by 211
Self-citationNew Technologies for Construction of Medium-Rise Buildings in Seismic Regions: The XLAM Case
Ceccotti, A. (2008) · Structural Engineering International · doi:10.2749/101686608784218680 · Cited by 188
Self-citationElastic and ductile design of multi-storey crosslam massive wooden buildings under seismic actions
Fragiacomo, M., Dujic, B., & Sustersic, I. (2011) · Engineering Structures · doi:10.1016/j.engstruct.2011.05.020 · Cited by 173
Self-citationRinaldin, G., Amadio, C., & Fragiacomo, M. (2013) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.2310 · Cited by 165
Self-citationApproximate R-Factor for Cross-Laminated Timber Walls in Multistory Buildings
Pei, S., van de Lindt, J. W., & Popovski, M. (2012) · Journal of Architectural Engineering · doi:10.1061/(asce)ae.1943-5568.0000117 · Cited by 100
Full-Scale Shaking-Table Tests of XLam Panel Systems and Numerical Verification: Specimen 1
Hristovski, V., Dujič, B., Stojmanovska, M., & Mirčevska, V. (2012) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0000754 · Cited by 74
Analytical study on seismic force modification factors for cross-laminated timber buildings
Pei, S., Popovski, M., & van de Lindt, J. W. (2013) · Canadian Journal of Civil Engineering · doi:10.1139/cjce-2013-0021 · Cited by 59
SOFIE Project - Cyclic tests on cross-laminated wooden panels
Ceccotti, A., Lauriola, M. P., Pinna, M., & Sandhaas, C. (2006) · AirIuav (Università Iuav di Venezia) · Cited by 45
Self-citation
Cited by
Cross laminated timber (CLT): overview and development
Brandner, R., Flatscher, G., Ringhofer, A., Schickhofer, G., & Thiel, A. (2016) · European Journal of Wood and Wood Products · doi:10.1007/s00107-015-0999-5 · Cited by 832
Seismic Design of Cross-Laminated Timber Buildings
Tannert, T., Follesa, M., Fragiacomo, M., Gonzalez, P., Isoda, H., Moroder, D., Xiong, H., & van de Lindt, J. (2018) · Wood and Fiber Science · doi:10.22382/wfs-2018-037 · Cited by 77
Self-citationExperimental testing and analytical modelling of single and double post-tensioned CLT shear walls
Brown, J. R., Li, M., Palermo, A., Pampanin, S., Sarti, F., & Nokes, R. (2022) · Engineering Structures · doi:10.1016/j.engstruct.2022.114065 · Cited by 39
Aloisio, A., Boggian, F., Tomasi, R., & Fragiacomo, M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123046 · Cited by 30
Self-citation
Metadata
- Authors
- Gavric, I., Fragiacomo, M., & Ceccotti, A.
- Venue
- Journal of Structural Engineering
- Published
- 2015-11
- Volume
- 141
- Issue
- 11
- ISSN
- 0733-9445 (ISSN-L)
- 1943-541X
- OpenAlex
- W2031825525
- Cited by
- 272
- References
- 11
- FWCI
- 24.76
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cyclic Behavior of CLT Wall Systems: Experimental Tests and Analytical Prediction Models. https://app.cochat.ai/papers/10.1061/(asce)st.1943-541x.0001246
- The paper
- Gavric, I., Fragiacomo, M., & Ceccotti, A. (2015). Cyclic Behavior of CLT Wall Systems: Experimental Tests and Analytical Prediction Models. Journal of Structural Engineering. https://doi.org/10.1061/(asce)st.1943-541x.0001246
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.