The DOI matches its Crossref record.
A new force sensor incorporating force-feedback control for interfacial force microscopy
Abstract
A new interfacial-force microscope capable of measuring the forces between two surfaces over the entire range of surface separations, up to contact, is described. The design is centered around a differential-capacitance displacement sensor where the common capacitor plate is supported by torsion bars. A force-feedback control system is incorporated which balances the interfacial forces at the sensor, maintaining the common capacitor plate at its rest position. This control therefore eliminates the instability or ‘‘jumping’’ which occurs with conventional cantilever-based force sensors when the attractive force gradient between the fixed sample and sensor exceeds the mechanical stiffness of the cantilever. The operating characteristics of the sensor and its ability to measure interfacial forces using the feedback control at surface separations smaller than this instability point are demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Force measurements with the atomic force microscope: Technique, interpretation and applications
Butt, H.-J., Cappella, B., & Kappl, M. (2005) · Surface Science Reports · doi:10.1016/j.surfrep.2005.08.003 · Cited by 3,709
Dislocation nucleation and defect structure during surface indentation
Kelchner, C. L., Plimpton, S. J., & Hamilton, J. C. (1998) · Physical Review B · doi:10.1103/physrevb.58.11085 · Cited by 2,154
Force-distance curves by atomic force microscopy
Cappella, B., & Dietler, G. (1999) · Surface Science Reports · doi:10.1016/s0167-5729(99)00003-5 · Cited by 1,694
A review on mechanics and mechanical properties of 2D materials—Graphene and beyond
Akinwande, D., Brennan, C. J., Bunch, J. S., Egberts, P., Felts, J. R., Gao, H., Huang, R., Kim, J.-S., Li, T., Li, Y., et al. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.01.008 · Cited by 1,342
Mechanical Properties of Monolayer Graphene Oxide
Suk, J. W., Piner, R. D., An, J., & Ruoff, R. S. (2010) · ACS Nano · doi:10.1021/nn101781v · Cited by 1,194
Metadata
- Authors
- Joyce, S. A., & Houston, J. E.
- Venue
- Review of Scientific Instruments
- Publisher
- AIP Publishing
- Published
- 1991-03-01
- Volume
- 62
- Issue
- 3
- Pages
- 710-715
- ISSN
- 0034-6748 (ISSN-L)
- 1089-7623
- OpenAlex
- W2037889661
- Cited by
- 220
- References
- 0
- FWCI
- 5.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A new force sensor incorporating force-feedback control for interfacial force microscopy. https://app.cochat.ai/papers/10.1063/1.1142072
- The paper
- Joyce, S. A., & Houston, J. E. (1991). A new force sensor incorporating force-feedback control for interfacial force microscopy. Review of Scientific Instruments. https://doi.org/10.1063/1.1142072
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.