Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 528

The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.

Domain wall motion and its contribution to the dielectric and piezoelectric properties of lead zirconate titanate films

Xu, F., Trolier-McKinstry, S., Ren, W., Xu, Baomin, Xie, Z.-L., Hemker, K. J.·2001·Journal of Applied Physics

Abstract

In this article, domain wall motion and the extrinsic contributions to the dielectric and piezoelectric responses in sol–gel derived lead zirconate titanate (PZT) films with compositions near the morphotropic phase boundary were investigated. It was found that although the films had different thicknesses, grain sizes, and preferred orientations, similar intrinsic dielectric constants were obtained for all films between 0.5 and 3.4 μm thick. It was estimated that about 25%–50% of the dielectric response at room temperature was from extrinsic sources. The extrinsic contribution to the dielectric constant of PZT films was mainly attributed to 180° domain wall motion, which increased with both film thickness and grain size. In studies on the direct and converse longitudinal piezoelectric coefficients of PZT films as a function of either stress or electric driving field, it was found that the ferroelastic non-180° domain wall motion was limited. Thus extrinsic contributions to the piezoelectric response were small in fine grain PZT films (especially those under 1.5 μm in thickness). However, as the films became thicker (>5μm), nonlinear behavior between the converse piezoelectric coefficient and the electric driving field was observed. This indicated that there was significant ferroelectric non-180° domain wall motion under high external excitation in thicker films. The activity of the non-180° domain walls was studied through non-180° domain switching. For fine grain films with film thicknesses less than 2 μm, non-180° switching was negligible. Transmission electron microscopy plan-view micrographs evidenced non-180° domain fringes in these films, where the vast majority of grains were 50–100 nm in diameter and showed a single set of domain fringes. Taken together, these measurements suggest that the pinning of non-180° domain walls is very strong in films with thickness less than 2 μm. In thicker films, non-180° domain switching was evidenced when the poling field exceeded a threshold field. The threshold field decreased with an increase in film thickness, suggesting more non-180° domain wall mobility in thicker films. Non-180° domain switching in large grained PZT films was found to be much easier and more significant than in the fine grained PZT films.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1063/1.1325005

Cites

9 of 9 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 9 references

Cited by

See all 528

Metadata

Authors
Xu, F., Trolier-McKinstry, S., Ren, W., Xu, B., Xie, Z.-L., & Hemker, K. J.
Venue
Journal of Applied Physics
Published
2001-01-15
Volume
89
Issue
2
Pages
1336-1348
ISSN
  • 0021-8979 (ISSN-L)
  • 1089-7550
OpenAlex
W2054445416
Cited by
528
References
9
FWCI
13.21
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Domain wall motion and its contribution to the dielectric and piezoelectric properties of lead zirconate titanate films. https://app.cochat.ai/papers/10.1063/1.1325005
The paper
Xu, F., Trolier-McKinstry, S., Ren, W., Xu, B., Xie, Z.-L., & Hemker, K. J. (2001). Domain wall motion and its contribution to the dielectric and piezoelectric properties of lead zirconate titanate films. Journal of Applied Physics. https://doi.org/10.1063/1.1325005

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.