The DOI matches its Crossref record.
Energy transfer and device performance in phosphorescent dye doped polymer light emitting diodes
Abstract
Singlet and triplet–triplet energy transfer in phosphorescent dye doped polymer light emitting devices were investigated. Poly(N-vinylcarbazol) and poly[9,9′-di-n-hexyl-2,7-fluorene-alt- 1,4-(2,5-di-n-hexyloxy)phenylene] (PFHP) were selected as the host polymer for the phosphorescent dopants fac-tris(2-phenylpyridine) iridium(III) [Ir(ppy)3] and 2,3,7,8,12,13, 17,18-octaethyl-21H,23H-porphyrin platinum(II) (PtOEP) because of their high triplet energy levels and long phosphorescence lifetimes. In case of PVK film, efficient triplet energy transfers to both PtOEP and Ir(ppy)3 were observed. In contrast, the triplet energy transfer did not occur or was very weak from PFHP to both PtOEP and Ir(ppy)3 although usual requirements for triplet energy transfer were satisfied. Furthermore, the singlet–singlet energy transfer did not take place from PFHP to Ir(ppy)3 in doped films even though the Förster radius is more than 30 Å. However, the blended film of Ir(ppy)3 with PFHP and PMMA showed the green emission from Ir(ppy)3 via singlet energy transfer. In addition, the solution of PFHP and Ir(ppy)3 (8 wt. %) in p-xylene also showed green emission. The blocking of the energy transfers in the phosphorescent dye doped PFHP films is found to be originated from the formation of aggregates which is evident from the microscopic images taken by transmission electron microscope, atomic force microscope, and fluorescence microscope. The formation of aggregates prevents dopant molecules from being in close proximity with host molecules thereby inhibiting energy transfer processes. The phase separation deteriorates the device performance also. Therefore, the chemical compatibility of a dopant with a host polymer as well as conventional requirements for energy transfers must be significantly considered to fabricate efficient phosphorescent dye doped polymer light emitting devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Efficiency Roll‐Off in Organic Light‐Emitting Diodes
Murawski, C., Leo, K., & Gather, M. C. (2013) · Advanced Materials · doi:10.1002/adma.201301603 · Cited by 1,153
Evans, R. C., Douglas, P., & Winscom, C. J. (2006) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2006.02.007 · Cited by 1,113
White organic light-emitting diodes: Status and perspective
Reineke, S., Thomschke, M., Lüssem, B., & Leo, K. (2013) · Reviews of Modern Physics · doi:10.1103/revmodphys.85.1245 · Cited by 659
You, Y., & Park, S. Y. (2009) · Dalton Trans. · doi:10.1039/b812281d · Cited by 655
Principles of phosphorescent organic light emitting devices
Minaev, B., Baryshnikov, G., & Agren, H. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c3cp53806k · Cited by 509
Metadata
- Authors
- Noh, Y.-Y., Lee, C.-L., Kim, J.-J., & Yase, K.
- Venue
- The Journal of Chemical Physics
- Publisher
- AIP Publishing
- Published
- 2003-02-08
- Volume
- 118
- Issue
- 6
- Pages
- 2853-2864
- ISSN
- 0021-9606 (ISSN-L)
- 1089-7690
- OpenAlex
- W2021511844
- Cited by
- 232
- References
- 0
- FWCI
- 16.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Energy transfer and device performance in phosphorescent dye doped polymer light emitting diodes. https://app.cochat.ai/papers/10.1063/1.1535211
- The paper
- Noh, Y.-Y., Lee, C.-L., Kim, J.-J., & Yase, K. (2003). Energy transfer and device performance in phosphorescent dye doped polymer light emitting diodes. The Journal of Chemical Physics. https://doi.org/10.1063/1.1535211
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.