The DOI matches its Crossref record.
Limiting Law of the Reinforcement of Rubber
Abstract
The effect of the filler upon the modulus of compounded rubber has been calculated with the aid of some simplifying assumptions. From these calculations it is found that the increase in modulus, caused by the filler, is directly proportional to the volume loading, and is independent of the particle size of the filler. The stress system in the vicinity of a spherical filler particle has also been calculated. A series of experiments has been made to check these calculations. From the results of these experiments, it has been deduced that carbon black is flocculated in rubber; and that P-33, Thermax, and Gilder's whiting are completely dispersed in rubber. These last-named fillers give increases in modulus substantially in agreement with the calculations. It has further been found that Kadox and XX zinc oxide give unusually large increases in modulus. These are ascribed to alteration of the type of cure of the rubber matrix. Catalpo clay showed excessive modulus because of high calender grain.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Theory of Filler Reinforcement
Guth, E. (1945) · Journal of Applied Physics · doi:10.1063/1.1707495 · Cited by 1,232
Constitutive modeling of the large strain time-dependent behavior of elastomers
BERGSTROM, J. (1998) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(97)00075-6 · Cited by 1,147
Graphene-polymer nanocomposites for structural and functional applications
Hu, K., Kulkarni, D. D., Choi, I., & Tsukruk, V. V. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.03.001 · Cited by 1,085
Dynamic mechanical properties of particulate‐filled composites
Lewis, T. B., & Nielsen, L. E. (1970) · Journal of Applied Polymer Science · doi:10.1002/app.1970.070140604 · Cited by 1,030
Schaefer, D. W., & Justice, R. S. (2007) · Macromolecules · doi:10.1021/ma070356w · Cited by 789
A review of particulate reinforcement theories for polymer composites
Ahmed, S., & Jones, F. R. (1990) · Journal of Materials Science · doi:10.1007/bf00580110 · Cited by 781
Properties of linear elastomeric polyurethanes
Cooper, S. L., & Tobolsky, A. V. (1966) · Journal of Applied Polymer Science · doi:10.1002/app.1966.070101204 · Cited by 553
Relaxation in filled polymers: A fractional calculus approach
Metzler, R., Schick, W., Kilian, H.-G., & Nonnenmacher, T. F. (1995) · The Journal of Chemical Physics · doi:10.1063/1.470346 · Cited by 516
Mullins, L., & Tobin, N. R. (1965) · Journal of Applied Polymer Science · doi:10.1002/app.1965.070090906 · Cited by 500
Poly(ethylene oxide)/Silica Nanocomposites: Structure and Rheology
Zhang, Q., & Archer, L. A. (2002) · Langmuir · doi:10.1021/la026338j · Cited by 429
Role of the Entangled Amorphous Network in Tensile Deformation of Semicrystalline Polymers
Men, Y., Rieger, J., & Strobl, G. (2003) · Physical Review Letters · doi:10.1103/physrevlett.91.095502 · Cited by 428
POSS Polymers: Physical Properties and Biomaterials Applications
Wu, J., & Mather, P. T. (2009) · Polymer Reviews · doi:10.1080/15583720802656237 · Cited by 411
Tensile modulus of polymer nanocomposites
Ji, X. L., Jing, J. K., Jiang, W., & Jiang, B. Z. (2002) · Polymer Engineering & Science · doi:10.1002/pen.11007 · Cited by 388
Koerner, H., Liu, W., Alexander, M., Mirau, P., Dowty, H., & Vaia, R. A. (2005) · Polymer · doi:10.1016/j.polymer.2005.02.025 · Cited by 351
Large strain time-dependent behavior of filled elastomers
Bergström, J. S., & Boyce, M. C. (2000) · Mechanics of Materials · doi:10.1016/s0167-6636(00)00028-4 · Cited by 315
Mechanical properties of particulate filled polymers
Bigg, D. M. (1987) · Polymer Composites · doi:10.1002/pc.750080208 · Cited by 305
Das, A., Stöckelhuber, K. W., Jurk, R., Saphiannikova, M., Fritzsche, J., Lorenz, H., Klüppel, M., & Heinrich, G. (2008) · Polymer · doi:10.1016/j.polymer.2008.09.031 · Cited by 295
Jouault, N., Vallat, P., Dalmas, F., Said, S., Jestin, J., & Boué, F. (2009) · Macromolecules · doi:10.1021/ma801908u · Cited by 278
Concepts and conflicts in nanoparticles reinforcement to polymers beyond hydrodynamics
Song, Y., & Zheng, Q. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.09.002 · Cited by 274
KALAPRASAD, G., JOSEPH, K., THOMAS, S., & PAVITHRAN, C. (1997) · Journal of Materials Science · doi:10.1023/a:1018651218515 · Cited by 264
Advances in layered double hydroxide (LDH)-based elastomer composites
Basu, D., Das, A., Stöckelhuber, K. W., Wagenknecht, U., & Heinrich, G. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.011 · Cited by 261
The dynamic properties of carbon black loaded natural rubber vulcanizates. Part II
Payne, A. R. (1962) · Journal of Applied Polymer Science · doi:10.1002/app.1962.070062115 · Cited by 250
Topological entanglement length in polymer melts and nanocomposites by a DPD polymer model
Karatrantos, A., Clarke, N., Composto, R. J., & Winey, K. I. (2013) · Soft Matter · doi:10.1039/c3sm27651a · Cited by 76
Recent advances on the structure–properties relationship of multiblock copolymers
Baeza, G. P. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210406 · Cited by 47
Metadata
- Authors
- Smallwood, H. M.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1944-11-01
- Volume
- 15
- Issue
- 11
- Pages
- 758-766
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2077878440
- Cited by
- 555
- References
- 0
- FWCI
- 21.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.