The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
The effect of grain size on the sensitivity of nanocrystalline metal-oxide gas sensors
Abstract
The effect of grain size on the sensitivity of chemoresistive nanocrystalline metal-oxide gas sensors was evaluated by calculating the effective carrier concentration as a function of the surface state density for a typical sensing material, SnO2, with different grain sizes between 5 and 80 nm. This involved numerical computation of the charge balance equation (the electroneutrality condition) using approximated analytical solutions of Poisson’s equation for small spherical crystallites. The calculations demonstrate a steep decrease in the carrier concentration when the surface state density reaches a critical value that corresponds to a condition of fully depleted grains, namely, when nearly all the electrons are trapped at the surface. Assuming that the variations in the surface state density are induced by surface interactions with ambient gas molecules, these calculations enable us to simulate the response curves of nanocrystalline gas sensors. The simulations show that the conductivity increases linearly with decreasing trapped charge densities, and that the sensitivity to the gas-induced variations in the trapped charge density is proportional to 1/D, where D is the average grain size.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conduction Model of Metal Oxide Gas Sensors
Barsan, N., & Weimar, U. (2001) · Journal of Electroceramics · doi:10.1023/a:1014405811371 · Cited by 2,721
New approaches for improving semiconductor gas sensors
Yamazoe, N. (1991) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(91)80213-4 · Cited by 1,796
Grain size effects on gas sensitivity of porous SnO2-based elements
Xu, C., Tamaki, J., Miura, N., & Yamazoe, N. (1991) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(91)80207-z · Cited by 1,426
Fundamental and practical aspects in the design of nanoscaled SnO 2 gas sensors: a status report
Barsan, N., Schweizer-Berberich, M., & Göpel†, W. (1999) · Fresenius' Journal of Analytical Chemistry · doi:10.1007/s002160051490 · Cited by 786
Basic Aspects and Challenges of Semiconductor Gas Sensors
Shimizu, Y., & Egashira, M. (1999) · MRS Bulletin · doi:10.1557/s0883769400052465 · Cited by 611
The Hall effect in polycrystalline and powdered semiconductors
Orton, J. W., & Powell, M. J. (1980) · Reports on Progress in Physics · doi:10.1088/0034-4885/43/11/001 · Cited by 595
Morrison, S. R. (1981) · Sensors and Actuators · doi:10.1016/0250-6874(81)80054-6 · Cited by 538
A contribution on some basic definitions of sensors properties
D'Amico, A., & Di Natale, C. (2001) · IEEE Sensors Journal · doi:10.1109/jsen.2001.954831 · Cited by 270
Cited by
Metal Oxide Gas Sensors: Sensitivity and Influencing Factors
Wang, C., Yin, L., Zhang, L., Xiang, D., & Gao, R. (2010) · Sensors · doi:10.3390/s100302088 · Cited by 2,928
Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview
Kim, H.-J., & Lee, J.-H. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2013.11.005 · Cited by 2,258
Metal Oxide Nanostructures and Their Gas Sensing Properties: A Review
Sun, Y.-F., Liu, S.-B., Meng, F.-L., Liu, J.-Y., Jin, Z., Kong, L.-T., & Liu, J.-H. (2012) · Sensors · doi:10.3390/s120302610 · Cited by 1,218
Room-temperature gas sensing of ZnO-based gas sensor: A review
Zhu, L., & Zeng, W. (2017) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2017.10.021 · Cited by 1,105
Porous Metal Oxides as Gas Sensors
Tiemann, M. (2007) · Chemistry – A European Journal · doi:10.1002/chem.200700927 · Cited by 675
Mesoporous materials as gas sensors
Wagner, T., Haffer, S., Weinberger, C., Klaus, D., & Tiemann, M. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35379b · Cited by 629
A Review on Graphene-Based Gas/Vapor Sensors with Unique Properties and Potential Applications
Wang, T., Huang, D., Yang, Z., Xu, S., He, G., Li, X., Hu, N., Yin, G., He, D., & Zhang, L. (2016) · Nano-Micro Letters · doi:10.1007/s40820-015-0073-1 · Cited by 600
Ultrasensitive Chemiresistors Based on Electrospun TiO2 Nanofibers
Kim, I.-D., Rothschild, A., Lee, B. H., Kim, D. Y., Jo, S. M., & Tuller, H. L. (2006) · Nano Letters · doi:10.1021/nl061197h · Cited by 593
Self-citationMetal-oxide-semiconductor based gas sensors: screening, preparation, and integration
Zhang, J., Qin, Z., Zeng, D., & Xie, C. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp07799d · Cited by 556
Semiconductor Gas Sensors: Dry Synthesis and Application
Tricoli, A., Righettoni, M., & Teleki, A. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200903801 · Cited by 543
First Fifty Years of Chemoresistive Gas Sensors
Neri, G. (2015) · Chemosensors · doi:10.3390/chemosensors3010001 · Cited by 530
New perspectives of gas sensor technology
Yamazoe, N., & Shimanoe, K. (2009) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2009.01.023 · Cited by 436
Ponzoni, A., Comini, E., Sberveglieri, G., Zhou, J., Deng, S. Z., Xu, N. S., Ding, Y., & Wang, Z. L. (2006) · Applied Physics Letters · doi:10.1063/1.2203932 · Cited by 427
Selectivity in Chemiresistive Gas Sensors: Strategies and Challenges
Bulemo, P. M., Kim, D.-H., Shin, H., Cho, H.-J., Koo, W.-T., Choi, S.-J., Park, C., Ahn, J., Güntner, A. T., Penner, R. M., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00592 · Cited by 418
Yang, D., Kamienchick, I., Youn, D. Y., Rothschild, A., & Kim, I. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001251 · Cited by 404
Self-citationChemiresistive Hydrogen Sensors: Fundamentals, Recent Advances, and Challenges
Koo, W.-T., Cho, H.-J., Kim, D.-H., Kim, Y. H., Shin, H., Penner, R. M., & Kim, I.-D. (2020) · ACS Nano · doi:10.1021/acsnano.0c05307 · Cited by 379
Dai, J., Ogbeide, O., Macadam, N., Sun, Q., Yu, W., Li, Y., Su, B.-L., Hasan, T., Huang, X., & Huang, W. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00459a · Cited by 378
Advances and new directions in gas-sensing devices
Kim, I.-D., Rothschild, A., & Tuller, H. L. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.041 · Cited by 343
Self-citationA comprehensive review on synthesis methods for transition-metal oxide nanostructures
Guo, T., Yao, M.-S., Lin, Y.-H., & Nan, C.-W. (2015) · CrystEngComm · doi:10.1039/c5ce00034c · Cited by 328
Volanti, D. P., Felix, A. A., Orlandi, M. O., Whitfield, G., Yang, D., Longo, E., Tuller, H. L., & Varela, J. A. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202332 · Cited by 315
Room-Temperature Semiconductor Gas Sensors: Challenges and Opportunities
Tang, Y., Zhao, Y., & Liu, H. (2022) · ACS Sensors · doi:10.1021/acssensors.2c01142 · Cited by 258
Marchand, P., Hassan, I. A., Parkin, I. P., & Carmalt, C. J. (2013) · Dalton Transactions · doi:10.1039/c3dt50607j · Cited by 257
Semiconductor Metal Oxides as Chemoresistive Sensors for Detecting Volatile Organic Compounds
Lin, T., Lv, X., Hu, Z., Xu, A., & Feng, C. (2019) · Sensors · doi:10.3390/s19020233 · Cited by 254
Li, T., Yin, W., Gao, S., Sun, Y., Xu, P., Wu, S., Kong, H., Yang, G., & Wei, G. (2022) · Nanomaterials · doi:10.3390/nano12060982 · Cited by 222
Hydrogen gas sensor based on metal oxide nanoparticles decorated graphene transistor
Zhang, Z., Zou, X., Xu, L., Liao, L., Liu, W., Ho, J., Xiao, X., Jiang, C., & Li, J. (2015) · Nanoscale · doi:10.1039/c5nr01924a · Cited by 212
Metadata
- Authors
- Rothschild, A., & Komem, Y.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2004-06-01
- Volume
- 95
- Issue
- 11
- Pages
- 6374-6380
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2011077052
- Cited by
- 628
- References
- 8
- FWCI
- 6.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.