The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Modeling of electric energy harvesting using piezoelectric windmill
Abstract
This letter reports a theoretical model for determination of generated electric power from piezoelectric bimorph transducers in low frequency range far from the piezoelectric resonance. The model is divided into two parts. In the first part the open circuit voltage response of the transducer under the ac stress is computed based on the bending beam theory for bimorph. In the second part, this open circuit voltage acts as the input to the equivalent circuit of the capacitor connected across a pure resistive load. The results of the theoretical model were verified by comparing it with the measured response of a prototype windmill. The prototype piezoelectric windmill consisting of ten piezoelectric bimorph transducers was operated in the wind speed of 1–12 mph. A power of 7.5 mW at the wind speed of 10 mph was measured across a matching load of 6.7kΩ. The theoretical model was found to give very accurate prediction of the generated power and matching load and an excellent matching was found with the experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
GPS-less low-cost outdoor localization for very small devices
Bulusu, N., Heidemann, J., & Estrin, D. (2000) · IEEE Personal Communications · doi:10.1109/98.878533 · Cited by 3,592
Analysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
Electroceramics: Materials, Properties, Applications
Moulson, A. J., & Herbert, J. M. (2003) · Wiley eBooks · doi:10.1002/0470867965 · Cited by 1,011
PicoRodio supports ad hoc ultra-low power wireless networking
Rabaey, J. M., Ammer, M. J., da Silva, J. L., Patel, D., & Roundy, S. (2000) · Computer · doi:10.1109/2.869369 · Cited by 1,010
Vibration-to-electric energy conversion
Meninger, S., Mur-Miranda, J. O., Amirtharajah, R., Chandrakasan, A., & Lang, J. H. (2001) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/92.920820 · Cited by 867
Piezoelectric Windmill: A Novel Solution to Remote Sensing
Priya, S., Chen, C.-T., Fye, D., & Zahnd, J. (2005) · Japanese Journal of Applied Physics · doi:10.1143/jjap.44.l104 · Cited by 240
Self-citation
Cited by
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Energy harvesting in wireless sensor networks: A comprehensive review
Shaikh, F. K., & Zeadally, S. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.010 · Cited by 1,253
Cook-Chennault, K. A., Thambi, N., & Sastry, A. M. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/4/043001 · Cited by 1,241
Advances in energy harvesting using low profile piezoelectric transducers
Priya, S. (2007) · Journal of Electroceramics · doi:10.1007/s10832-007-9043-4 · Cited by 918
Self-citationLiu, H., Zhong, J., Lee, C., Lee, S.-W., & Lin, L. (2018) · Applied Physics Reviews · doi:10.1063/1.5074184 · Cited by 905
Metadata
- Authors
- Priya, S.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2005-10-24
- Volume
- 87
- Issue
- 18
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2008277414
- Cited by
- 327
- References
- 6
- FWCI
- 14.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.