The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
An experimental study of drop-on-demand drop formation
Abstract
The dynamics of drop-on-demand (DOD) drop formation have been studied experimentally using an imaging system with an interframe time of 1μs and a spatial resolution of 0.81μm∕pixel. Using a piezoelectrical actuated inkjet printhead with the nozzle orifice diameter of 53μm, experiments were conducted over a range of viscosities (1.0–5.0cP) and surface tensions (35–73mN∕m). The effects of the driving signal, which controls the piezoelectric transducer that produces the pressure pulse to drive the liquid from the reservoir through the orifice, have been examined along with those of liquid properties. The main stages of DOD drop formation, including ejection and stretching of liquid, pinch-off of liquid thread from the nozzle exit, contraction of liquid thread, breakup of liquid thread into primary drop and satellites, and recombination of primary drop and satellites, are analyzed based on the experimental results. The breakup time of liquid threads was found to be dependent mainly on the capillary time based on the length scale of the nozzle orifice and the growth rate of the most unstable disturbance normalized by the inverse of the capillary time. However, a well-designed waveform of driving signal can initiate an abrupt pinch-off of the liquid thread from the nozzle exit. During the contraction of the liquid thread after it has pinched off from the nozzle, two modes of breakup were observed: end-pinching where the liquid thread pinches off from an almost spherical head, and multiple breakup due to capillary waves. The effects of liquid and system parameters on the formation and recombination of the primary drop and satellites were investigated. Based on experimental observations, a necessary condition for the recombination of the primary drop and satellite and the limit for liquid thread length without breakup during contraction are proposed. The primary drop size increases slightly with increasing surface tension and/or decreasing viscosity. The driving voltage to the piezoelectric transducer mainly determines whether satellite formation will occur and the size of satellites, and it has insignificant effect on primary drop size.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rayleigh, L. (1878) · Proceedings of the London Mathematical Society · doi:10.1112/plms/s1-10.1.4 · Cited by 3,064
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Nonlinear dynamics and breakup of free-surface flows
Eggers, J. (1997) · Reviews of Modern Physics · doi:10.1103/revmodphys.69.865 · Cited by 1,817
DROP AND SPRAY FORMATION FROM A LIQUID JET
Lin, S. P., & Reitz, R. D. (1998) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.30.1.85 · Cited by 803
Progress and Trends in Ink-jet Printing Technology
Le, H. P. (1998) · Journal of Imaging Science and Technology · doi:10.2352/j.imagingsci.technol.1998.42.1.art00007 · Cited by 720
Numerical Calculation of the Fluid Dynamics of Drop-on-Demand Jets
Fromm, J. E. (1984) · IBM Journal of Research and Development · doi:10.1147/rd.283.0322 · Cited by 601
Small‐scale free surface flows with breakup: Drop formation and emerging applications
Basaran, O. A. (2002) · AIChE Journal · doi:10.1002/aic.690480902 · Cited by 478
An experimental study of transient effects in the breakup of viscous drops
Stone, H. A., Bentley, B. J., & Leal, L. G. (1986) · Journal of Fluid Mechanics · doi:10.1017/s0022112086001118 · Cited by 455
Relaxation and breakup of an initially extended drop in an otherwise quiescent fluid
Stone, H. A., & Leal, L. G. (1989) · Journal of Fluid Mechanics · doi:10.1017/s0022112089000194 · Cited by 437
Ink-jet delivery of particle suspensions by piezoelectric droplet ejectors
Reis, N., Ainsley, C., & Derby, B. (2005) · Journal of Applied Physics · doi:10.1063/1.1888026 · Cited by 335
The contraction of liquid filaments
Schulkes, R. M. S. M. (1996) · Journal of Fluid Mechanics · doi:10.1017/s0022112096001632 · Cited by 115
Simplicity and complexity in a dripping faucet
Subramani, H. J., Yeoh, H. K., Suryo, R., Xu, Q., Ambravaneswaran, B., & Basaran, O. A. (2006) · Physics of Fluids · doi:10.1063/1.2185111 · Cited by 90
Cited by
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Eggers, J., & Villermaux, E. (2008) · Reports on Progress in Physics · doi:10.1088/0034-4885/71/3/036601 · Cited by 1,827
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
Microfluidic methods for generating continuous droplet streams
Christopher, G. F., & Anna, S. L. (2007) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/40/19/r01 · Cited by 860
Metadata
- Authors
- Dong, H., Carr, W. W., & Morris, J. F.
- Venue
- Physics of Fluids
- Publisher
- AIP Publishing
- Published
- 2006-07-01
- Volume
- 18
- Issue
- 7
- ISSN
- 1070-6631 (ISSN-L)
- 1089-7666
- OpenAlex
- W2069319309
- Cited by
- 395
- References
- 13
- FWCI
- 16.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.