Room temperature bonding of silicon and lithium niobate
The DOI matches its Crossref record.
Abstract
The feasibility of wafer-level bonding was examined for silicon (Si)/lithium niobate (LiNbO3) wafers by using a modified surface activated bonding process at room temperature. A low energy argon ion source of 80eV energy with 3A current was used, which was capable of sputter cleaning and depositing Fe nanolayers on the surfaces. Visual inspection showed that almost all of the 4in. Si∕LiNbO3 wafers were bonded. The measured bond strengths were as high as 37MPa but were inhomogeneous. This is due to the lack of uniform application of force over the surfaces (which are not parallel to the jigs) and the pulling angles during the pulling test. A 5nm thick amorphous layer was observed across the Si∕LiNbO3 interface. Electron energy loss spectroscopy analysis confirmed the presence of Fe in the interfacial amorphous layer. This Fe-containing interfacial layer appears to be responsible for the high bonding strength observed between Si∕LiNbO3 at room temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Rahim, A., Hermans, A., Wohlfeil, B., Petousi, D., Kuyken, B., Van Thourhout, D., & Baets, R. G. (2021) · Advanced Photonics · doi:10.1117/1.ap.3.2.024003 · Cited by 391
Weigel, P. O., Zhao, J., Fang, K., Al-Rubaye, H., Trotter, D., Hood, D., Mudrick, J., Dallo, C., Pomerene, A. T., Starbuck, A. L., et al. (2018) · Optics Express · doi:10.1364/oe.26.023728 · Cited by 338
Micro‐structured integrated electro‐optic LiNbO3modulators
Janner, D., Tulli, D., García‐Granda, M., Belmonte, M., & Pruneri, V. (2009) · Laser & Photonics Reviews · doi:10.1002/lpor.200810073 · Cited by 164
Compact Lithium Niobate Electrooptic Modulators
Rao, A., & Fathpour, S. (2018) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2017.2779869 · Cited by 145
Thin-film lithium niobate electro-optic modulators: To etch or not to etch
Mookherjea, S., Mere, V., & Valdez, F. (2023) · Applied Physics Letters · doi:10.1063/5.0142232 · Cited by 20
Metadata
- Authors
- Howlader, M. M. R., Suga, T., & Kim, M. J.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2006-07-17
- Volume
- 89
- Issue
- 3
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2085157844
- Cited by
- 60
- References
- 0
- FWCI
- 1.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.