Ultraprecise microreproduction of a three-dimensional artistic sculpture by multipath scanning method in two-photon photopolymerization
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Ultraprecise fabrication of three-dimensional (3D) microstructures comes up to be one of the most important issues in two-photon induced photopolymerization. To date, it has been difficult to fabricate 3D microstructures without any deformation due to the surface tension between a rinsing material and solidified microstructures during the developing process: In general, the surface tension significantly affects the precision of the resulting 3D microstructures. To overcome this problem, the authors propose a simple and effective laser scanning method to reinforce the strength of 3D microstructures without loss of precision. Overall, a complex 3D artistic sculpture such as “The Thinker” was reproduced in the controlled ultraprecise form, which shows that the proposed method enables the fabrication of 3D patterns with dramatically improved precision and stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
Complex micromachines produced and driven by light
Galajda, P., & Ormos, P. (2001) · Applied Physics Letters · doi:10.1063/1.1339258 · Cited by 565
Cited by
Designable 3D nanofabrication by femtosecond laser direct writing
Zhang, Y.-L., Chen, Q.-D., Xia, H., & Sun, H.-B. (2010) · Nano Today · doi:10.1016/j.nantod.2010.08.007 · Cited by 543
Advances in 3D nano/microfabrication using two-photon initiated polymerization
Lee, K.-S., Kim, R. H., Yang, D.-Y., & Park, S. H. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.01.001 · Cited by 475
Self-citationUltrafast laser nanostructuring of photopolymers: a decade of advances
Malinauskas, M., Farsari, M., Piskarskas, A., & Juodkazis, S. (2013) · Physics Reports · doi:10.1016/j.physrep.2013.07.005 · Cited by 431
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Recent progress in multiphoton microfabrication
Maruo, S., & Fourkas, J. T. (2008) · Laser & Photonics Reviews · doi:10.1002/lpor.200710039 · Cited by 390
Metadata
- Authors
- Yang, D.-Y., Park, S. H., Lim, T. W., Kong, H.-J., Yi, S. W., Yang, H. K., & Lee, K.-S.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2007-01-01
- Volume
- 90
- Issue
- 1
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W1998189698
- Cited by
- 65
- References
- 3
- FWCI
- 5.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.