The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Ambient wind energy harvesting using cross-flow fluttering
Abstract
In this experimental study, we propose and test a bioinspired piezo-leaf architecture which converts wind energy into electrical energy by wind-induced fluttering motion. While conventional fluttering devices are arranged in parallel with the flow direction, here we explore a dangling cross-flow stalk arrangement. This architecture amplifies the vibration by an order of magnitude, making it appropriate for low-cost organic piezomaterials. We fabricated prototypes using flexible piezoelectric materials as stalks and polymer film as leaves. A series of experiments demonstrated a peak output power of approximately 600 μW and maximum power density of approximately 2 mW/cm3 from a single leaf.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
A study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819
Energy Scavenging for Mobile and Wireless Electronics
Paradiso, J. A., & Starner, T. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.9 · Cited by 2,653
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Williamson, C. H. K., & Govardhan, R. (2004) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.36.050802.122128 · Cited by 2,487
A Review of Power Harvesting from Vibration Using Piezoelectric Materials
Sodano, H. A., Inman, D. J., & Park, G. (2004) · The Shock and Vibration Digest · doi:10.1177/0583102404043275 · Cited by 1,361
A piezomagnetoelastic structure for broadband vibration energy harvesting
Erturk, A., Hoffmann, J., & Inman, D. J. (2009) · Applied Physics Letters · doi:10.1063/1.3159815 · Cited by 970
Advances in energy harvesting using low profile piezoelectric transducers
Priya, S. (2007) · Journal of Electroceramics · doi:10.1007/s10832-007-9043-4 · Cited by 918
Estimation of Electric Charge Output for Piezoelectric Energy Harvesting
Sodano, H. A., Park, G., & Inman, D. J. (2004) · Strain · doi:10.1111/j.1475-1305.2004.00120.x · Cited by 750
Zhang, J., Childress, S., Libchaber, A., & Shelley, M. (2000) · Nature · doi:10.1038/35048530 · Cited by 694
Cited by
A review of piezoelectric energy harvesting based on vibration
Kim, H. S., Kim, J.-H., & Kim, J. (2011) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-011-0151-3 · Cited by 1,121
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“Various flutter-style harvesters including (a) flutter stalk (reprinted from [328], with the permission of AIP Publishing), (b) flap with revolute joint (reproduced from [330].”
BackgroundEnergy harvesting from low frequency applications using piezoelectric materials
Li, H., Tian, C., & Deng, Z. D. (2014) · Applied Physics Reviews · doi:10.1063/1.4900845 · Cited by 705
Piezoelectric Energy Harvesting Solutions: A Review
Covaci, C., & Gontean, A. (2020) · Sensors · doi:10.3390/s20123512 · Cited by 691
Aeroelastic energy harvesting: A review
Abdelkefi, A. (2016) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2015.10.006 · Cited by 498
Metadata
- Authors
- Li, S., Yuan, J., & Lipson, H.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2011-01-15
- Volume
- 109
- Issue
- 2
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2092093132
- Cited by
- 325
- References
- 17
- FWCI
- 34.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ambient wind energy harvesting using cross-flow fluttering. https://app.cochat.ai/papers/10.1063/1.3525045
- The paper
- Li, S., Yuan, J., & Lipson, H. (2011). Ambient wind energy harvesting using cross-flow fluttering. Journal of Applied Physics. https://doi.org/10.1063/1.3525045
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.