The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Ferroelectric properties and fatigue of PbZr0.51Ti0.49O3 thin films of varying thickness: Blocking layer model
Abstract
Ferroelectric capacitors having Pt bottom and top electrodes and a ferroelectric film of composition PbZr0.51Ti0.49O3 (PZT) were fabricated and investigated. The PZT films of thicknesses varying from 0.12 to 0.69 μm were prepared by organometallic chemical-vapor deposition. Annealed capacitors were investigated by capacitance, hysteresis, and pulse switching measurements. It is found that the thickness dependence of the reciprocal capacitance, the coercive voltage, and the polarization measured by pulse switching can all be explained by a blocking layer model, in which a dielectric layer of thickness dbl and relative permittivity εbl is situated between the PZT film and an electrode. It is shown that (i) the coercive field is independent of thickness having a value of 2.4 V/μm; (ii) the ratio εbl/dbl is in the range 20–28 nm−1; (iii) the voltage across the blocking layer is proportional to the polarization, Vbl=cP, where c=4.1±0.5 V m2/C; and (iv) the polarization depends on the electric field in the PZT layer, independent of thickness. Pulse switching endurance measurements showed that in the saturation range the fatigue for these ferroelectric capacitors is determined by the pulse voltage and is independent of the thickness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Klee, M., Eusemann, R., Waser, R. M., Brand, W., & van Hal, H. A. M. (1992) · Journal of Applied Physics · doi:10.1063/1.351726 · Cited by 207
Sakashita, Y., Segawa, H., Tominaga, K., & Okada, M. (1993) · Journal of Applied Physics · doi:10.1063/1.353936 · Cited by 183
Nanosecond switching of thin ferroelectric films
Larsen, P. K., Kampschöer, G. L. M., Ulenaers, M. J. E., Spierings, G. A. C. M., & Cuppens, R. (1991) · Applied Physics Letters · doi:10.1063/1.105402 · Cited by 164
Self-citationLarsen, P. K., Cuppens, R., & Spierings, G. A. C. M. (1992) · Ferroelectrics · doi:10.1080/00150199208015102 · Cited by 150
Self-citationBuilt-in electric field assisted nucleation and coercive fields in ferroelectric thin films
Tagantsev, A. K., Pawlaczyk, C., Brooks, K. G., & Setter, N. (1994) · Integrated ferroelectrics · doi:10.1080/10584589408018654 · Cited by 91
Cited by
Ferroelectric thin films: Review of materials, properties, and applications
Setter, N., Damjanovic, D., Eng, L., Fox, G., Gevorgian, S., Hong, S., Kingon, A., Kohlstedt, H., Park, N. Y., Stephenson, G. B., et al. (2006) · Journal of Applied Physics · doi:10.1063/1.2336999 · Cited by 1,907
Self-citationPörtner, H.-O. (2010) · Journal of Experimental Biology · doi:10.1242/jeb.037523 · Cited by 1,458
Tagantsev, A. K., Stolichnov, I., Colla, E. L., & Setter, N. (2001) · Journal of Applied Physics · doi:10.1063/1.1381542 · Cited by 602
Zhou, M., Liang, R., Zhou, Z., & Dong, X. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc03003k · Cited by 535
The Properties of Ferroelectric Films at Small Dimensions
Shaw, T. M., Trolier-McKinstry, S., & McIntyre, P. C. (2000) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.30.1.263 · Cited by 531
Metadata
- Authors
- Larsen, P. K., Dormans, G. J. M., Taylor, D. J., & van Veldhoven, P. J.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1994-08-15
- Volume
- 76
- Issue
- 4
- Pages
- 2405-2413
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2070028799
- Cited by
- 347
- References
- 5
- FWCI
- 12.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.