The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes
Abstract
Entropy generation minimization (finite time thermodynamics, or thermodynamic optimization) is the method that combines into simple models the most basic concepts of heat transfer, fluid mechanics, and thermodynamics. These simple models are used in the optimization of real (irreversible) devices and processes, subject to finite-size and finite-time constraints. The review traces the development and adoption of the method in several sectors of mainstream thermal engineering and science: cryogenics, heat transfer, education, storage systems, solar power plants, nuclear and fossil power plants, and refrigerators. Emphasis is placed on the fundamental and technological importance of the optimization method and its results, the pedagogical merits of the method, and the chronological development of the field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Holman, J. P. (1976) · Cited by 9,157
Nield, D. A., & Bejan, A. (1999) · Springer eBooks · doi:10.1007/978-1-4757-3033-3 · Cited by 5,282
Self-citation(1999) · Cryogenic Heat Transfer · doi:10.1201/b15230-9 · Cited by 3,534
Advanced Engineering Thermodynamics
Bejan, A. (2016) · Wiley eBooks · doi:10.1002/9781119245964 · Cited by 3,381
Self-citationThermal design and optimization
Bejan, A. (1995) · Cited by 2,957
Self-citationEfficiency of a Carnot engine at maximum power output
Curzon, F. L., & Ahlborn, B. (1975) · American Journal of Physics · doi:10.1119/1.10023 · Cited by 2,317
Kreith, F., Bohn, M., & Kirkpatrick, A. (1997) · Journal of Solar Energy Engineering · doi:10.1115/1.2887901 · Cited by 1,885
A Study of Entropy Generation in Fundamental Convective Heat Transfer
Bejan, A. (1979) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3451063 · Cited by 1,648
Self-citationEntropy generation through heat and fluid flow
Bejan, A. (1982) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,371
Self-citationSecond law analysis in heat transfer
Bejan, A. (1980) · Energy · doi:10.1016/0360-5442(80)90091-2 · Cited by 767
Self-citationAvailability analysis: A guide to efficient energy use
Moran, M. (1982) · Cited by 688
Petela, R. (1964) · Journal of Heat Transfer · doi:10.1115/1.3687092 · Cited by 618
Second-Law Analysis in Heat Transfer and Thermal Design
Bejan, A. (1982) · Advances in heat transfer · doi:10.1016/s0065-2717(08)70172-2 · Cited by 602
Self-citationAn ecological optimization criterion for finite-time heat engines
Angulo-Brown, F. (1991) · Journal of Applied Physics · doi:10.1063/1.347562 · Cited by 567
Introduction to Thermodynamics
(2000) · Chemistry · doi:10.1201/9781420033045.ch13 · Cited by 540
Andresen, B., Salamon, P., & Berry, R. S. (1984) · Physics Today · doi:10.1063/1.2916405 · Cited by 432
Bejan, A. (1977) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3450705 · Cited by 349
Self-citationGeneral criterion for rating heat-exchanger performance
Bejan, A. (1978) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(78)90064-9 · Cited by 286
Self-citationTheory of heat transfer-irreversible power plants
Bejan, A. (1988) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(88)90064-6 · Cited by 285
Self-citationExergy Analysis: Principles and Practice
Moran, M. J., & Sciubba, E. (1994) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.2906818 · Cited by 283
Thermal efficiency at maximum work output: New results for old heat engines
Leff, H. S. (1987) · American Journal of Physics · doi:10.1119/1.15071 · Cited by 223
Second Law Analysis and Synthesis of Solar Collector Systems
Bejan, A., Kearney, D. W., & Kreith, F. (1981) · Journal of Solar Energy Engineering · doi:10.1115/1.3266200 · Cited by 215
Self-citationTheory of heat transfer-irreversible refrigeration plants
Bejan, A. (1989) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(89)90045-8 · Cited by 208
Self-citationOn the thermodynamic limit of photovoltaic energy conversion
Vos, A. D., & Pauwels, H. (1981) · Applied Physics A · doi:10.1007/bf00901283 · Cited by 205
Thermodynamics in finite time. I. The step-Carnot cycle
Andresen, B., Berry, R. S., Nitzan, A., & Salamon, P. (1977) · Physical Review A · doi:10.1103/physreva.15.2086 · Cited by 181
A Second Law analysis of the optimum design and operation of thermal energy storage systems
Krane, R. J. (1987) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(87)90059-7 · Cited by 172
Fin Geometry for Minimum Entropy Generation in Forced Convection
Dimos Poulikakos, A., & Bejan, A. (1982) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3245176 · Cited by 171
Self-citationOptimal staging of endoreversible heat engines
Rubin, M. H., & Andresen, B. (1982) · Journal of Applied Physics · doi:10.1063/1.331592 · Cited by 170
Two Thermodynamic Optima in the Design of Sensible Heat Units for Energy Storage
Bejan, A. (1978) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3450882 · Cited by 152
Self-citationAltfeld, K., Leiner, W., & Fiebig, M. (1988) · Solar Energy · doi:10.1016/0038-092x(88)90128-4 · Cited by 147
El-Wakil, M. M. (1962) · CERN Document Server (European Organization for Nuclear Research) · Cited by 122
Entropy Generation in Convective Heat Transfer and Isothermal Convective Mass Transfer
San, J., Worek, W. M., & LAVAN, Z. (1987) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3248137 · Cited by 115
Unification of Three Different Theories Concerning the Ideal Conversion of Enclosed Radiation
Bejan, A. (1987) · Journal of Solar Energy Engineering · doi:10.1115/1.3268177 · Cited by 105
Self-citationDesign considerations for refrigeration cycles
Klein, S. A. (1992) · International Journal of Refrigeration · doi:10.1016/0140-7007(92)90009-j · Cited by 98
Power and Refrigeration Plants for Minimum Heat Exchanger Inventory
Bejan, A. (1993) · Journal of Energy Resources Technology · doi:10.1115/1.2905982 · Cited by 96
Self-citationEntropy generation in combined heat and mass transfer
San, J. Y., Worek, W. M., & Lavan, Z. (1987) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(87)90168-2 · Cited by 91
Evaluation of heat transfer augmentation techniques based on their impact on entropy generation
Bejan, A., & Pfister, P. A. (1980) · Letters in Heat and Mass Transfer · doi:10.1016/0094-4548(80)90037-5 · Cited by 90
Self-citationAn exergy analysis of sensible and latent heat storage
Bjurström, H., & Carlsson, B. (1985) · Journal of Heat Recovery Systems · doi:10.1016/0198-7593(85)90081-5 · Cited by 83
Entropy Generation in a Heat Exchanger
SEKULICá, D. P. (1986) · Heat Transfer Engineering · doi:10.1080/01457638608939647 · Cited by 77
Costs of Irreversibilities in Heat Exchanger Design
London, A. L., & Shah, R. K. (1983) · Heat Transfer Engineering · doi:10.1080/01457638108939603 · Cited by 74
Thermodynamic Optimization of Phase-Change Energy Storage Using Two or More Materials
Lim, J. S., Bejan, A., & Kim, J. H. (1992) · Journal of Energy Resources Technology · doi:10.1115/1.2905925 · Cited by 68
Self-citationOn the generation of entropy in a counterflow heat exchanger
Sarangi, S., & Chowdhury, K. (1982) · Cryogenics · doi:10.1016/0011-2275(82)90095-9 · Cited by 64
Contact Melting Heat Transfer and Lubrication
Bejan, A. (1994) · Advances in heat transfer · doi:10.1016/s0065-2717(08)70231-4 · Cited by 63
Self-citationOptimum solar collector operation for maximizing cycle work output
Howell, J. R., & BANNEROT, R. B. (1977) · Solar Energy · doi:10.1016/0038-092x(77)90052-4 · Cited by 61
Extraction of exergy from solar collectors under time-varying conditions
Bejan, A. (1982) · International Journal of Heat and Fluid Flow · doi:10.1016/0142-727x(82)90002-9 · Cited by 59
Self-citationOrlov, V. N., & Berry, R. S. (1993) · Journal of Applied Physics · doi:10.1063/1.354396 · Cited by 57
Thermodynamic optimization of mechanical supports for cryogenic apparatus
Bejan, A., & Smith, J. L. (1974) · Cryogenics · doi:10.1016/0011-2275(74)90181-7 · Cited by 54
Self-citationGraphical exergy analysis of complex cycles
Jin, H., & Ishida, M. (1993) · Energy · doi:10.1016/0360-5442(93)90040-k · Cited by 52
Altfeld, K., Leiner, W., & Fiebig, M. (1988) · Solar Energy · doi:10.1016/0038-092x(88)90026-6 · Cited by 50
Second-Law-Based Thermoeconomic Optimization of Two-Phase Heat Exchangers
Zubair, S. M., Kadaba, P. V., & Evans, R. B. (1987) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3248078 · Cited by 48
Évolution et applications du concept d'entropie
Chambadal, P. (1963) · Virtual Defense Library (Ministerio de Defensa) · Cited by 46
Oullette, W. R., & Bejan, A. (1980) · Energy · doi:10.1016/0360-5442(80)90039-0 · Cited by 45
Self-citationTwo design aspects of defrosting refrigerators
Radcenco, V, Vargas, J. V. C., Bejan, A., & Lim, J. S. (1995) · International Journal of Refrigeration · doi:10.1016/0140-7007(94)00003-g · Cited by 42
Self-citationOptimum temperature staging of cryogenic refrigeration system
Jeong, S., & Smith, J. L. (1994) · Cryogenics · doi:10.1016/0011-2275(94)90078-7 · Cited by 42
Optimum Efficiencies and Phase Change Temperatures in Latent Heat Storage Systems
Aceves, S. M., Nakamura, H., & REISTAD, G. M. (1994) · Journal of Energy Resources Technology · doi:10.1115/1.2906013 · Cited by 41
Bejan, A., Vargas, J. V. C., & Lim, J. S. (1994) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(94)90087-6 · Cited by 33
Self-citationOne approach to irreversibility minimization in compact crossflow heat exchanger design
Sekulić, D. P., & Herman, Č. (1986) · International Communications in Heat and Mass Transfer · doi:10.1016/0735-1933(86)90069-2 · Cited by 33
How to distribute a finite amount of insulation on a wall with nonuniform temperature
Bejan, A. (1993) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(93)80065-3 · Cited by 29
Self-citationThe Melting of an Ice Shell on a Heated Horizontal Cylinder
VARGAS, J. V. C., Bejan, A., & Dobrovicescu, A. (1994) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.2910925 · Cited by 28
Self-citationLatent heat thermal storage for solar dynamic power generation
Bellecci, C., & Conti, M. (1993) · Solar Energy · doi:10.1016/0038-092x(93)90093-4 · Cited by 27
Thermodynamic optimization of thermal radiation shields for a cryogenic apparatus
Eyssa, Y. M., & Okasha, O. (1978) · Cryogenics · doi:10.1016/0011-2275(78)90070-x · Cited by 22
Optimum flowrate history for cooldown and energy storage processes
Bejan, A., & Schultz, W. (1982) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(82)90203-4 · Cited by 21
Self-citationThermodynamic Analysis of Latent Heat Storage in a Shell-and-Tube Heat Exchanger
Charach, C., & Zemel, A. (1992) · Journal of Solar Energy Engineering · doi:10.1115/1.2929995 · Cited by 20
Economic Sizing of Steam Piping and Insulation
Wepfer, W. J., Gaggioli, R. A., & Obert, E. F. (1979) · Journal of Engineering for Industry · doi:10.1115/1.3439532 · Cited by 20
Discrete cooling of low heat leak supports to 4.2 K
Bejan, A. (1975) · Cryogenics · doi:10.1016/0011-2275(75)90121-6 · Cited by 19
Self-citationSecond-law analysis of a two-dimensional regenerator
San, J., Worek, W. M., & LAVAN, Z. (1987) · Energy · doi:10.1016/0360-5442(87)90007-7 · Cited by 17
Second Law Performance Analysis for Offset Strip-Fin Heat Exchangers
Schenone, C., Tagliafico, L. A., & Tanda, G. (1991) · Heat Transfer Engineering · doi:10.1080/01457639108939743 · Cited by 11
Second-law-based optimization of heat exchanger networks using load curves
CHATO, J. C., & Damianides, C. (1986) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(86)90138-9 · Cited by 8
Cited by
Finite Time Thermodynamic Optimization or Entropy Generation Minimization of Energy Systems
Chen, L., Wu, C., & Sun, F. (1999) · Journal of Non-Equilibrium Thermodynamics · doi:10.1515/jnetdy.1999.020 · Cited by 815
Bejan, A. (2002) · International Journal of Energy Research · doi:10.1002/er.804 · Cited by 603
Self-citationPourkiaei, S. M., Ahmadi, M. H., Sadeghzadeh, M., Moosavi, S., Pourfayaz, F., Chen, L., Pour Yazdi, M. A., & Kumar, R. (2019) · Energy · doi:10.1016/j.energy.2019.07.179 · Cited by 571
Efficiency at Maximum Power of Low-Dissipation Carnot Engines
Esposito, M., Kawai, R., Lindenberg, K., & Van den Broeck, C. (2010) · Physical Review Letters · doi:10.1103/physrevlett.105.150603 · Cited by 546
Entropy Generation Minimization
(2016) · Advanced Engineering Thermodynamics · doi:10.1002/9781119245964.ch11 · Cited by 494
Metadata
- Authors
- Bejan, A.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1996-02-01
- Volume
- 79
- Issue
- 3
- Pages
- 1191-1218
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2058020634
- Cited by
- 1,951
- References
- 68
- FWCI
- 83.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.