The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
High performance ferroelectric relaxor-PbTiO3 single crystals: Status and perspective
Abstract
Ferroelectrics are essential components in a wide range of applications, including ultrasonic transducers, sensors, and actuators. In the single crystal form, relaxor-PbTiO3 (PT) piezoelectric materials have been extensively studied due to their ultrahigh piezoelectric and electromechanical properties. In this article, a perspective and future development of relaxor-PT crystals are given. Initially, various techniques for the growth of relaxor-PT crystals are reviewed, with crystals up to 100 mm in diameter and 200 mm in length being readily achievable using the Bridgman technique. Second, the characterizations of dielectric and electromechanical properties are surveyed. Boundary conditions, including temperature, electric field, and stress, are discussed in relation to device limitations. Third, the physical origins of the high piezoelectric properties and unique loss characteristics in relaxor-PT crystals are discussed with respect to their crystal structure, phase, engineered domain configuration, macrosymmetry, and domain size. Finally, relaxor-PT single crystals are reviewed with respect to specific applications and contrasted to conventional piezoelectric ceramics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Damjanovic, D., & Demartin, M. (1997) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/9/23/018 · Cited by 343
Damjanovic, D., Budimir, M., Davis, M., & Setter, N. (2003) · Applied Physics Letters · doi:10.1063/1.1592880 · Cited by 106
Davis, M., Damjanovic, D., & Setter, N. (2006) · Journal of Applied Physics · doi:10.1063/1.2358408 · Cited by 95
Cited by
Jo, W., Dittmer, R., Acosta, M., Zang, J., Groh, C., Sapper, E., Wang, K., & Rödel, J. (2012) · Journal of Electroceramics · doi:10.1007/s10832-012-9742-3 · Cited by 964
Ultrahigh Piezoelectric Properties in Textured (K,Na)NbO3‐Based Lead‐Free Ceramics
Li, P., Zhai, J., Shen, B., Zhang, S., Li, X., Zhu, F., & Zhang, X. (2018) · Advanced Materials · doi:10.1002/adma.201705171 · Cited by 555
Self-citationRecent Progress on BaTiO3-Based Piezoelectric Ceramics for Actuator Applications
Gao, J., Xue, D., Liu, W., Zhou, C., & Ren, X. (2017) · Actuators · doi:10.3390/act6030024 · Cited by 310
Design, optimization, modeling and testing of a piezoelectric footwear energy harvester
Qian, F., Xu, T.-B., & Zuo, L. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.069 · Cited by 194
Deciphering the importance of graded poling in piezoelectric materials: A numerical study
Kiran, R., Kumar, A., Sharma, S., Kumar, R., & Vaish, R. (2020) · Engineering Reports · doi:10.1002/eng2.12266 · Cited by 11
Metadata
- Authors
- Zhang, S., & Li, F.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2012-02-01
- Volume
- 111
- Issue
- 3
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2000476660
- Cited by
- 966
- References
- 3
- FWCI
- 27.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High performance ferroelectric relaxor-PbTiO3 single crystals: Status and perspective. https://app.cochat.ai/papers/10.1063/1.3679521
- The paper
- Zhang, S., & Li, F. (2012). High performance ferroelectric relaxor-PbTiO3 single crystals: Status and perspective. Journal of Applied Physics. https://doi.org/10.1063/1.3679521
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
