The DOI matches its Crossref record.
Structural, optical, and surface acoustic wave properties of epitaxial ZnO films grown on (011̄2) sapphire by metalorganic chemical vapor deposition
Abstract
High-quality ZnO films are receiving increased interest for use in low-loss high-frequency surface acoustic wave (SAW) devices, acousto-optic and optical modulators, as buffer layers for III-nitride growth, and as the active material in ultraviolet solid state lasers. In this work, high quality epitaxial ZnO films were grown on R-plane sapphire substrates by metalorganic chemical vapor deposition. The structural, piezoelectric, and optical properties of the ZnO films on R sapphire have been investigated. The epitaxial relationship between ZnO and R-Al2O3 was found to be (112̄0) ZnO∥(011̄2) Al2O3, and [0001] ZnO∥[01̄11] Al2O3. The interface between as-grown ZnO and R sapphire was atomically sharp and semicoherent, as evaluated by transmission electron microscopy. On annealing the films at temperatures above 850 °C, a solid state reaction occurred between ZnO and Al2O3, resulting in the formation of ZnAl2O4 (spinel) at the interface. A 15–20 nm spinel layer formed when the ZnO film was annealed at 850 °C for 30 min, whereas a 150 nm layer formed when the film was annealed at 1000 °C for 150 min. To prevent this reaction from occurring, the maximum process temperature should be below 750 °C. The surface acoustic wave properties of the piezoelectric ZnO were evaluated by fabricating SAW devices on (112̄0) ZnO/(011̄2) Al2O3. An effective electromechanical coupling coefficient, keff2, of 6% was achieved for a 1.5 μm thick ZnO film, which is close to the value for bulk single-crystal ZnO. The photoluminescence spectra were obtained both at room temperature and at 11 K. The full width at half maximum of the 3.363 eV band edge emission photoluminescence peak measured at 11 K was 6 meV, which is close to that for single-crystal ZnO. We also evaluated the anisotropic absorption characteristics of the (112̄0) ZnO film, which can be used for a high contrast ultraviolet light modulator.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Zinc oxide—from synthesis to application: a review
Kołodziejczak-Radzimska, A., & Jesionowski, T. (2014) · Materials · doi:10.3390/ma7042833 · Cited by 2,475
Fonoberov, V. A., Alim, K. A., Balandin, A. A., Xiu, F., & Liu, J. (2006) · Physical Review B · doi:10.1103/physrevb.73.165317 · Cited by 437
Organic and inorganic nanomaterials: fabrication, properties and applications
Alshammari, B. H., Lashin, M. M. A., Mahmood, M. A., Al-Mubaddel, F. S., Ilyas, N., Rahman, N., Sohail, M., Khan, A., Abdullaev, S. S., & Khan, R. (2023) · RSC Advances · doi:10.1039/d3ra01421e · Cited by 331
Hu, Y., Zhang, Y., Xu, C., Zhu, G., & Wang, Z. L. (2010) · Nano Letters · doi:10.1021/nl103203u · Cited by 261
Ismail, R. A., Ali, A. K., Ismail, M. M., & Hassoon, K. I. (2011) · Applied Nanoscience · doi:10.1007/s13204-011-0006-3 · Cited by 90
Metadata
- Authors
- Gorla, C. R., Emanetoglu, N. W., Liang, S., Mayo, W. E., Lu, Y., Wraback, M., & Shen, H.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1999-03-01
- Volume
- 85
- Issue
- 5
- Pages
- 2595-2602
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1988989957
- Cited by
- 736
- References
- 0
- FWCI
- 23.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structural, optical, and surface acoustic wave properties of epitaxial ZnO films grown on (011̄2) sapphire by metalorganic chemical vapor deposition. https://app.cochat.ai/papers/10.1063/1.369577
- The paper
- Gorla, C. R., Emanetoglu, N. W., Liang, S., Mayo, W. E., Lu, Y., Wraback, M., & Shen, H. (1999). Structural, optical, and surface acoustic wave properties of epitaxial ZnO films grown on (011̄2) sapphire by metalorganic chemical vapor deposition. Journal of Applied Physics. https://doi.org/10.1063/1.369577
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.