The DOI matches its Crossref record.
Wavelength dependent of laser shock-wave generation in the water-confinement regime
Abstract
The generation of high-intensity shock waves by laser plasma in the water-confinement regime has been investigated at 1.064, 0.532, and 0.355 μm laser wavelengths. Experimental characterizations of pressures induced by laser plasma have been performed with a velocimetry interferometer for any reflector. For each incident laser wavelength, above a laser power density threshold, maximum pressure levels saturate and the pressure durations are reduced due to parasitic plasma occurring in water. However, it is shown that this threshold is lower at the 0.532 and 0.355 μm wavelengths than at the 1.064 μm wavelength. The generation of the parasitic plasma in water is easier with a short wavelength because it would be dominated by multiphotoionization mechanisms. Below the saturation pressure threshold, the pressure levels are significantly higher at the 0.532 and 0.355 μm wavelengths than at the 1.064 μm wavelength. Unlike the detrimental effect of short laser wavelengths on water breakdown plasma, the confined laser interaction is shown to be more efficient in ultraviolet than in infrared laser irradiation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Laser shock processing and its effects on microstructure and properties of metal alloys: a review
Montross, C. (2002) · International Journal of Fatigue · doi:10.1016/s0142-1123(02)00022-1 · Cited by 1,111
Laser ablation in liquids: Applications in the synthesis of nanocrystals
Yang, G. W. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.10.016 · Cited by 1,055
Amendola, V., & Meneghetti, M. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42895d · Cited by 758
Gujba, A., & Medraj, M. (2014) · Materials · doi:10.3390/ma7127925 · Cited by 416
Kruusing, A. (2004) · Optics and Lasers in Engineering · doi:10.1016/s0143-8166(02)00142-2 · Cited by 271
Liu, P., Wang, C. X., Chen, X. Y., & Yang, G. W. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp802529r · Cited by 65
Kohsakowski, S., Santagata, A., Dell’Aglio, M., de Giacomo, A., Barcikowski, S., Wagener, P., & Gökce, B. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.077 · Cited by 62
Promoting the yield of nanoparticles from laser ablation in liquid
Jiang, Y., Liu, P., Liang, Y., Li, H. B., & Yang, G. W. (2011) · Applied Physics A · doi:10.1007/s00339-011-6557-z · Cited by 45
Nguyen, T. T. P., Tanabe-Yamagishi, R., & Ito, Y. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.10.160 · Cited by 44
Metadata
- Authors
- Berthe, L., Fabbro, R., Peyre, P., & Bartnicki, E.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1999-06-01
- Volume
- 85
- Issue
- 11
- Pages
- 7552-7555
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2053236979
- Cited by
- 209
- References
- 0
- FWCI
- 1.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.