Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 1,291

The DOI matches its Crossref record.

Electrical, optical, and structural properties of indium–tin–oxide thin films for organic light-emitting devices

Kim, H., Gilmore, C. M., Piqué, A., Horwitz, J. S., Mattoussi, H., Murata, H., Kafafi, Z. H., Chrisey, D. B.·1999·Journal of Applied Physics

Abstract

High-quality indium–tin–oxide (ITO) thin films (200–850 nm) have been grown by pulsed laser deposition (PLD) on glass substrates without a postdeposition annealing treatment. The structural, electrical, and optical properties of these films have been investigated as a function of target composition, substrate deposition temperature, background gas pressure, and film thickness. Films were deposited from various target compositions ranging from 0 to 15 wt % of SnO2 content. The optimum target composition for high conductivity was 5 wt % SnO2+95 wt % In2O3. Films were deposited at substrate temperatures ranging from room temperature to 300 °C in O2 partial pressures ranging from 1 to 100 mTorr. Films were deposited using a KrF excimer laser (248 nm, 30 ns full width at half maximum) at a fluence of 2 J/cm2. For a 150-nm-thick ITO film grown at room temperature in an oxygen pressure of 10 mTorr, the resistivity was 4×10−4 Ω cm and the average transmission in the visible range (400–700 nm) was 85%. For a 170-nm-thick ITO film deposited at 300 °C in 10 mTorr of oxygen, the resistivity was 2×10−4 Ω cm and the average transmission in the visible range was 92%. The Hall mobility and carrier density for a 150-nm-thick film deposited at 300 °C were 27 cm2/V s and 1.4×1021 cm−3, respectively. A reduction in the refractive index for ITO films can be achieved by raising the electron density in the films, which can be obtained by increasing the concentration of Sn dopants in the targets and/or increasing deposition temperature. Atomic force microscopy measurements of these ITO films indicated that their root-mean-square surface roughness (∼5 Å) was superior to that of commercially available sputter deposited ITO films (∼40 Å). The PLD ITO films were used to fabricate organic light-emitting diodes. From these structures the electroluminescence was measured and an external quantum efficiency of 1.5% was calculated.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1063/1.371708

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 1,291

Metadata

Authors
Kim, H., Gilmore, C. M., Piqué, A., Horwitz, J. S., Mattoussi, H., Murata, H., Kafafi, Z. H., & Chrisey, D. B.
Venue
Journal of Applied Physics
Published
1999-12-01
Volume
86
Issue
11
Pages
6451-6461
ISSN
  • 0021-8979 (ISSN-L)
  • 1089-7550
OpenAlex
W2063660264
Cited by
1,291
References
0
FWCI
12.29
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Electrical, optical, and structural properties of indium–tin–oxide thin films for organic light-emitting devices. https://app.cochat.ai/papers/10.1063/1.371708
The paper
Kim, H., Gilmore, C. M., Piqué, A., Horwitz, J. S., Mattoussi, H., Murata, H., Kafafi, Z. H., & Chrisey, D. B. (1999). Electrical, optical, and structural properties of indium–tin–oxide thin films for organic light-emitting devices. Journal of Applied Physics. https://doi.org/10.1063/1.371708

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.