The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
Microscopic mechanisms of laser ablation of organic solids in the thermal and stress confinement irradiation regimes
Abstract
The results of large-scale molecular dynamics simulations demonstrate that the mechanisms responsible for material ejection as well as most of the parameters of the ejection process have a strong dependence on the rate of the laser energy deposition. For longer laser pulses, in the regime of thermal confinement, a phase explosion of the overheated material is responsible for the collective material ejection at laser fluences above the ablation threshold. This phase explosion leads to a homogeneous decomposition of the expanding plume into a mixture of liquid droplets and gas phase molecules. The decomposition proceeds through the formation of a transient structure of interconnected liquid clusters and individual molecules and leads to the fast cooling of the ejected plume. For shorter laser pulses, in the regime of stress confinement, a lower threshold fluence for the onset of ablation is observed and attributed to photomechanical effects driven by the relaxation of the laser-induced pressure. Larger and more numerous clusters with higher ejection velocities are produced in the regime of stress confinement as compared to the regime of thermal confinement. For monomer molecules, the ejection in the stress confinement regime results in broader velocity distributions in the direction normal to the irradiated surface, higher maximum velocities, and stronger forward peaking of the angular distributions. The acoustic waves propagating from the absorption region are much stronger in the regime of stress confinement and the wave profiles can be related to the ejection mechanisms.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“When the incidence fluence reaches the ablation threshold, the ejection of matter increases significantly by more than one order of magnitude.106”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [106]
In the citing paper
“Meanwhile, if the ablation is performed at a fluence lower than the ablation threshold, the pulse duration does not change the yield of the ejected species.106”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [106]
In the citing paper
“A simulation for a 150 ps laser versus a 15 ps laser (Fig. 3), 106 found that the ablation threshold is B20% higher for the longer pulse width (35 J m À2 at 150 ps) than the shorter pulse width (29 J m À2 at 15 ps).”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [106]
In the citing paper
“It is also reported that the ablation yield of the 15 ps laser pulse is constantly higher at all fluences above the ablation threshold compared to the 150 ps laser.”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [106]
Citations
Cites
Karas, M., Gl�ckmann, M., & Sch�fer, J. (2000) · Journal of Mass Spectrometry · doi:10.1002/(sici)1096-9888(200001)35:1<1::aid-jms904>3.0.co;2-0 · Cited by 614
Ultraviolet laser ablation of organic polymers
Srinivasan, R., & Braren, B. (1989) · Chemical Reviews · doi:10.1021/cr00096a003 · Cited by 562
Resonant intermolecular transfer of vibrational energy in liquid water
Woutersen, S., & Bakker, H. J. (1999) · Nature · doi:10.1038/990058 · Cited by 553
Coarse-grained molecular dynamics and the atomic limit of finite elements
Rudd, R. E., & Broughton, J. Q. (1998) · Physical Review B · doi:10.1103/physrevb.58.r5893 · Cited by 473
Miotello, A., & Kelly, R. (1999) · Applied Physics A: Materials Science & Processing · doi:10.1007/s003390051357 · Cited by 408
Miller, J. C., & Haglund, R. F. (1998) · Cited by 358
Comments on explosive mechanisms of laser sputtering
Kelly, R., & Miotello, A. (1996) · Applied Surface Science · doi:10.1016/0169-4332(95)00481-5 · Cited by 313
Dreisewerd, K., Schürenberg, M., Karas, M., & Hillenkamp, F. (1995) · International Journal of Mass Spectrometry and Ion Processes · doi:10.1016/0168-1176(94)04108-j · Cited by 302
Laser ionization mass analysis
Vértes, Á., Gijbels, R., & Adams, F. C. (1993) · Cited by 238
Laser ablation of organic polymers: Microscopic models for photochemical and thermal processes
Garrison, B. J., & Srinivasan, R. (1985) · Journal of Applied Physics · doi:10.1063/1.335230 · Cited by 233
Self-citation
Research works printed but not linked: 14
- 1999, Appl. Phys. A: Mater. Sci. Process., 69A, S67
- 1976, Sov. Phys. Tech. Phys., 21, 430
- 1998, Appl. Surf. Sci., 127–129, 111
- 1999, Appl. Phys. A: Mater. Sci. Process., 68A, 515
- 1996, Int. J. Jpn. Soc. Precis. Eng., 30, 128
- 1996, Appl. Phys. A: Mater. Sci. Process., 62A, 303
- 1998, Appl. Surf. Sci., 127–129, 53
- 1994, AIP Conf. Proc., 288, 491
- 1994, Lasers Life Sci., 6, 55
- 1998, Appl. Surf. Sci., 127–129, 142
- 1999, Mater. Res. Soc. Symp. Proc., 538, 491
- 1999, Appl. Phys. A: Mater. Sci. Process., 69A, S75
- 1996, Appl. Surf. Sci., 96–98, 205
- 1999, Appl. Phys. A: Mater. Sci. Process., 69A, S637
Cited by
Items 301–400 of 438
Antibacterial property alterations induced by low zinc content in laser-structured brass
Ahmed, A. S., Müller, D. W., Bruyère, S., Holtsch, A., Müller, F., Brix, K., Migot, S., Kautenburger, R., Jacobs, K., Pierson, J. F., et al. (2024) · Applied Surface Science · doi:10.1016/j.apsusc.2024.160338 · Cited by 8
“[25,26] This process creates periodic line-like structures, as observed in this work where the periodicity is 3 µ m and the depth is 1.3 ± 0.1 µ m.”
InfluentialWitze, P. O., Gershenzon, M., & Michelsen, H. A. (2005) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2005-01-3791 · Cited by 8
Trimpin, S. (2023) · Mass Spectrometry Reviews · doi:10.1002/mas.21762 · Cited by 8
Influence exerted by bone-containing target body on thermoacoustic imaging with current injection
Li, Y., Liu, G., Song, J., & Xia, H. (2019) · Chinese Physics B · doi:10.1088/1674-1056/28/4/044302 · Cited by 8
Pulse dependence of ejection efficiencies in the UV ablation of bi-component van der Waals solids
Koubenakis, A., Labrakis, J., & Georgiou, S. K. (2001) · Chemical Physics Letters · doi:10.1016/s0009-2614(01)00950-2 · Cited by 8
Music-of-light stethoscope: a demonstration of the photoacoustic effect
Nikitichev, D. I., Xia, W., Hill, E. R., Mosse, C. A., Perkins, T. A., Konyn, K., Sebastien Ourselin, A., Desjardins, A. E., & Vercauteren, T. K. (2016) · Physics Education · doi:10.1088/0031-9120/51/4/045015 · Cited by 8
“The thermal confinement refers to the heat generated by absorption of a short laser pulse (τp), or its equivalent modulated light, and dissipated to the surrounding areas by thermal conduction (τth) (equation (1)) [24, 25].”
BackgroundMichalik-Onichimowska, A., Beitz, T., Panne, U., Löhmannsröben, H., & Riedel, J. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.06.155 · Cited by 8
Generation of nanoparticles by laser ablation: Combined MD-DSMC computational study
Itina, T., & Zhigilei, L. V. (2007) · Journal of Physics Conference Series · doi:10.1088/1742-6596/59/1/010 · Cited by 8
Self-citationPulsed laser ablation of borax target in vacuum and hydrogen DC glow discharges
Kale, A., Miotello, A., & Mosaner, P. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2005.09.060 · Cited by 8
Khalaji, M., Tavassoli, S. H., & Karimi, S. (2025) · Spectrochimica Acta Part B Atomic Spectroscopy · doi:10.1016/j.sab.2025.107358 · Cited by 7
Shakhov, A. M., Astafiev, A. A., & Nadtochenko, V. A. (2019) · Journal of Experimental and Theoretical Physics Letters · doi:10.1134/s0021364019050138 · Cited by 7
Sinapinic acid clusters distribution from monomer to mega Dalton’s region in MALDI process
Lai, S., Chang, K.-H., Lin, J., Wu, C.-L., & Chen, C. (2013) · Chemical Physics Letters · doi:10.1016/j.cplett.2013.01.030 · Cited by 7
Effect of submillisecond radiation of the erbium laser on absorbing liquid
Вовченко, В. И., Klimentov, S. M., Pivovarov, P. A., & Samokhin, A. A. (2007) · Bulletin of the Lebedev Physics Institute · doi:10.3103/s1068335607110048 · Cited by 7
Material behavior under extreme domain constraint in laser-assisted surface nanostructuring
Li, C., Zhang, L., Li, Y., & Wang, X. (2015) · Physics Letters A · doi:10.1016/j.physleta.2015.12.001 · Cited by 7
Near-field ablation threshold of cellular samples in the mid-infrared wavelength region
Raghu, D., Hoffmann, J. A., Gamari, B. D., & Reeves, M. E. (2012) · Applied Physics Letters · doi:10.1063/1.4719043 · Cited by 6
Pulse Duration Effects on Solution-Phase Protein Desorption in Laser Electrospray Mass Spectrometry
Parise, R. J., Dassanayake, D. R., & Levis, R. J. (2023) · Journal of the American Society for Mass Spectrometry · doi:10.1021/jasms.2c00362 · Cited by 6
Kumada, T., Akagi, H., Itakura, R., Otobe, T., Nishikino, M., & Yokoyama, A. (2015) · Applied Physics Letters · doi:10.1063/1.4921854 · Cited by 6
Generation of phosphor nanoparticles for temperature sensing by laser ablation in liquid
Avanesyan, S. M., & Haglund, R. F. (2013) · Applied Physics A · doi:10.1007/s00339-013-7872-3 · Cited by 6
Fundamentals of Laser-Assisted Fabrication of Inorganic and Organic Films
Schou, J. (2009) · NATO science for peace and security series. B, Physics and biophysics · doi:10.1007/978-1-4020-8903-9_15 · Cited by 6
The peak shape model for magnetic sector and time-of-flight mass spectrometers
Peregudov, O. N., & Buhay, O. M. (2010) · International Journal of Mass Spectrometry · doi:10.1016/j.ijms.2010.06.009 · Cited by 6
Computational studies of ultraviolet ablation of poly(methyl methacrylate)
Conforti, P. F., Yingling, Y. G., & Garrison, B. J. (2007) · Journal of Physics Conference Series · doi:10.1088/1742-6596/59/1/068 · Cited by 6
Self-citationFörster, G. D., & Calvo, F. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.145440 · Cited by 6
Basic Concepts of Laser Drilling
Schulz, W., & Eppelt, U. (2009) · Springer series in materials science · doi:10.1007/978-1-4020-9340-1_5 · Cited by 6
“Molecular dynamic calculations for a fs-pulse [25] and a ps-pulse [ 26 ] showed that matter passes through one of at least four different possible paths in the physical phase space during beam-matter interaction (Fig. 5.5a).”
BackgroundTakahashi, H., Takaoka, Y., Ebihara, S., Tsuri, Y., Maruyama, M., Yoshimura, M., Mori, Y., & Yoshikawa, H. (2024) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.4c02890 · Cited by 5
Busse, F., Kruber, S., Robertson, W. D., & Miller, R. J. D. (2018) · Journal of Applied Physics · doi:10.1063/1.5030741 · Cited by 5
Femtosecond Laser Fabrication of Hybrid Metal-Dielectric Structures with Nonlinear Photoluminescence
Ponkratova, E. Y., Игоревич, А. Э., Эдуардович, К. Ф., Koromyslov, S., Kudryashov, D. A., Mukhin, I. S., Veiko, V. P., Kuchmizhak, A. A., & Zuev, D. A. (2021) · Photonics · doi:10.3390/photonics8040121 · Cited by 5
Non-contact subsurface temperature measurements following mid-infrared laser irradiation
Avanesyan, S. M., & Haglund, R. F. (2012) · Applied Physics A · doi:10.1007/s00339-012-7222-x · Cited by 5
Tsuboi, Y., Irie, K., Miyasaka, H., & Itaya, A. (2003) · The Journal of Physical Chemistry A · doi:10.1021/jp021615g · Cited by 5
Thermal effects on artwork surfaces cleaned with laser ablation method
Pregowski, P., Marczak, J. A., & Koss, A. (2003) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.500118 · Cited by 5
Simon, D. A., Horkovics-Kováts, G. S., Xiang, Y., Abda, J., Papanastasiou, D. K., Ho, H.-Y., Wang, H., Schäffer, R., Karancsi, T., Mróz, A., et al. (2023) · ChemRxiv · doi:10.26434/chemrxiv-2023-p2g9h-v2 · Cited by 5
Nanoparticle formation by means of spark discharge at atmospheric pressure
Voloshko, A. (2015) · theses.fr (ABES) · doi:10.70675/f463cfd0z651dz42dez9209zf9793e456fe0 · Cited by 5
Inogamov, N. A., Khokhlov, V. A., Romashevskiy, S. A., Petrov, Y. V., Ovchinnikov, M. A., & Ashitkov, S. I. (2024) · Журнал Экспериментальной и Теоретической Физики · doi:10.31857/s0044451024020032 · Cited by 4
Thermo-acoustic imaging based on heat absorption distribution
Li, Y., GuoQiang, L. I. U., Song, J., & Xia, H. (2019) · Scientia Sinica Technologica · doi:10.1360/n092018-00315 · Cited by 4
Effect of laser pulse shaping on photoacoustic dosimetry in retinal models
Brown, R. B., Dufour, S., Deladurantaye, P., Bouch, N. L., Gallant, P., Méthot, S. J., Rochette, P. J., & Mermut, O. (2020) · Biomedical Optics Express · doi:10.1364/boe.403703 · Cited by 4
Numerical modeling of laser ablation of materials
Амирханов, И. В., Sarker, N. R., & Sarkhadov, I. (2020) · Вестник Российского университета дружбы народов. Серия: Математика, информатика, физика · doi:10.22363/2658-4670-2020-28-4-398-405 · Cited by 4
“The emergence and propagation of pressure waves generated by laser radiation [7], [8], as well as the dynamics of laser ablation [9], is well modeled using MD.”
MethodHaglund, R. F. (2007) · Springer series in optical sciences/SPringer series in optical sciences · doi:10.1007/978-0-387-30453-3_8 · Cited by 4
Desolvation of enkephalin–H2O clusters ejected from a quickly heated film
Dou, Y. (2005) · Chemical Physics Letters · doi:10.1016/j.cplett.2005.09.111 · Cited by 4
Laser ablation of AlN films grown on sapphire substrate
Safadi, M. R., Thakur, J. S., & Auner, G. W. (2005) · Journal of Applied Physics · doi:10.1063/1.1863420 · Cited by 4
Thermodynamics of absorbing solids during short-pulse laser ablation
Lorazo, P., Pérez, D., Lewis, L. J., & Meunier, M. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.548744 · Cited by 4
The impact of point thermal absorbers in ablation of poly(methyl methacrylate)
Conforti, P. F., Prasad, M., & Garrison, B. J. (2008) · Applied Physics A · doi:10.1007/s00339-008-4571-6 · Cited by 4
Self-citationChuang, Y., Lai, S., Lin, J., & Chen, C. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19092789 · Cited by 4
Dynamics of supported ultrathin molybdenum films driven by strong short laser impact
Khokhlov, V. A., Petrov, Y. V., Inogamov, N. A., Migdal, K. P., Winter, J., Aichele, C., Rapp, S., & Huber, H. P. (2019) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1147/1/012066 · Cited by 4
“Thermomechanical ablation was also observed in molecular dynamics (MD) simulations of laser heating of soft tissues [10].”
BackgroundConforti, P. F., Prasad, M., & Garrison, B. J. (2008) · Journal of Applied Physics · doi:10.1063/1.2921800 · Cited by 4
Self-citationInfrared laser ablation dynamics using light scattering
Kankanamalage, A. P. D., & Murray, K. K. (2023) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/acd38f · Cited by 3
“The laser energy is thermally confined if the laser pulse duration is shorter than the time required to transfer heat from the irradiated volume by thermal diffusion [58, 70].”
InfluentialАмирханов, И. В., Sarker, N. R., & Sarkhadov, I. (2021) · Вестник Российского университета дружбы народов. Серия: Математика, информатика, физика · doi:10.22363/2658-4670-2021-29-1-5-13 · Cited by 3
“The appearance and propagation of pressure waves generated by laser radiation [7], [8], as well as the dynamics of laser ablation [9], are well modeled using the MD.”
MethodEisfeld, E., Förster, D. J., Klein, D., & Roth, J. (2021) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ac41f9 · Cited by 3
Lee, H.-L., Hussain, A., Moon, Y.-J., Hwang, J. Y., & Moon, S. J. (2025) · Current Applied Physics · doi:10.1016/j.cap.2025.02.003 · Cited by 3
Amorphous Solid Water (ASW): Pulsed Laser Ablation of ASW/CO2 Thin Films
Rebolledo-Mayoral, O., Stomberg, J., McKean, S., Reisler, H., & Wittig, C. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp203916m · Cited by 3
Basic Concepts of Laser Drilling
Schulz, W., & Eppelt, U. (2017) · Springer series in materials science · doi:10.1007/978-3-319-56711-2_6 · Cited by 3
A thermodynamic model of plasma generation by pulsed laser irradiation in vacuum
Tosto, S. (2003) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/36/11/306 · Cited by 3
Kim, J., Suh, Y. J., & Kim, S. S. (2006) · Applied Surface Science · doi:10.1016/j.apsusc.2006.03.024 · Cited by 3
Direct Simulation Monte Carlo Calculation: Strategies for Using Complex Initial Conditions
Zeifman, M., Garrison, B. J., & Zhigilei, L. V. (2002) · MRS Proceedings · doi:10.1557/proc-731-w3.8 · Cited by 3
Self-citationPrecise micromachining of materials using femtosecond laser pulses
Garasz, K., Tański, M., Barbucha, R., & Kočík, M. (2015) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2182427 · Cited by 3
Huang, H. (2010) · Rutgers University Community Repository (Rutgers University) · doi:10.7282/t3k93783 · Cited by 3
“In the situation where the analytical description of the laser ablation of tissue is hindered by the complexity and diversity of the processes involved in the phenomenon, molecular dynamic simulation can provide useful information and is becoming a viable complementary approach to model and understand ablation process…”
MethodHosokawa, Y., Yasukuni, R., Spitz, J.-A., Tada, T., Negishi, T., Shukunami, C., Hiraki, Y., Asahi, T., Méallet‐Renault, R., & Masuhara (2007) · Handai Nanophotonics · doi:10.1016/s1574-0641(07)80021-0 · Cited by 3
Clair, G. (2011) · theses.fr (ABES) · doi:10.70675/9499280czbf0fz4fd5za3ebzed49f8da7367 · Cited by 3
Venkatachalam, T., Ganesan, S., & Sakthivel, K. (2006) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/39/8/026 · Cited by 2
Fan, X., Xiao, J. H., Hu, G., Zhao, Y., Kang, S., Lu, J., & Fan, H. (2016) · Chemical Papers · doi:10.1515/chempap-2016-0012 · Cited by 2
“…laser energy is deposited at a faster rate, a regime known as stress confinement is observed, in which the rate of energy dissipation into the material exceeds the rate of energy loss through the collective molecular motion of acoustic waves (Vogel & Venugopalan, 2003; Zhigilei & Garrison, 2000).”
BackgroundRetractedLeón, T. S. D., Salum, M. L., & Erra-Balsells, R. (2025) · Journal of Mass Spectrometry · doi:10.1002/jms.5154 · Cited by 2
Resonant infrared pulsed laser deposition of cyclic olefin copolymer films
Singaravelu, S., Klopf, J. M., Schriver, K. E., Park, H. K., Kelley, M. J., & Haglund, R. F. (2013) · Applied Physics A · doi:10.1007/s00339-013-7933-7 · Cited by 2
Photoacoustic imaging instrumentation for life sciences
Thakur, S. N., Singh, V., & Rai, P. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91732-2.00021-5 · Cited by 2
Trimpin, S., Inutan, E. D., Pagnotti, V. S., Karki, S., Marshall, D. D., Hoang, K., Wang, B., Lietz, C. B., Richards, A., Yenchick, F. S., et al. (2024) · Journal of Mass Spectrometry · doi:10.1002/jms.5018 · Cited by 2
León, T. S. D., Salum, M. L., & Erra-Balsells, R. (2025) · Thermochimica Acta · doi:10.1016/j.tca.2025.180004 · Cited by 2
Friedenauer, T., Spellauge, M., Sommereyns, A., Labenski, V., Esatbeyoglu, T., Rehbock, C., Huber, H. P., & Barcikowski, S. (2025) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.16.55 · Cited by 2
Effect of Pulse Laser Duration and Shape on PLD Thin Films Morphology and Structure
Ristoscu, C., & Ion, N. (2011) · InTech eBooks · doi:10.5772/24950 · Cited by 2
“There are several consistent attempts in the literature for describing the interaction of ultrashort laser pulses with materials, especially metallic ones (Kaganov et al., 1957; Zhigilei and Garrison, 2000).”
BackgroundLaser Physics for Materials Scientists: A Primer
Haglund, R. F. (2014) · Springer series in materials science · doi:10.1007/978-3-319-02898-9_1 · Cited by 2
Woryna, E., Badziak, J., Parys, P., Wo, J., Krása, J., Pfeifer, M., Rohlena, K., Woryna, E., Parys, P., & Suchańska, R. (2002) · Nukleonika · Cited by 2
Organic compound-contained plasmas as the media for frequency conversion of ultrashort pulses
Ganeev, R. A. (2016) · Applied Physics A · doi:10.1007/s00339-016-0104-x · Cited by 2
Generation and Propagation of MALDI Ion Packets Probed by Sheet-Like Nanosecond UV Laser Light
Shirota, T., & Hoshina, K. (2018) · Mass Spectrometry · doi:10.5702/massspectrometry.a0071 · Cited by 2
Gulino, M.-S., Banelli, L., & Vangi, D. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1038/1/012072 · Cited by 2
Production of Single Crystalline Seeds of Organic Nonlinear Optical Materials via Laser Ablation
Takahashi, H., Shiraiwa, M., Mag-usara, V. K., Dai, R., Agulto, V. C., Kato, K., Nakajima, M., Yamaji, M., Nakabayashi, S., Maruyama, M., et al. (2023) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.3c03189 · Cited by 2
APPLICATIONS OF FREE-ELECTRON LASERS IN BIOLOGICAL SCIENCES, MEDICINE AND MATERIALS SCIENCE
Haglund, R. F. (2007) · Springer eBooks · doi:10.1007/978-1-4020-5523-2_8 · Cited by 2
Conforti, P. F., Prasad, M., & Garrison, B. J. (2008) · Physical Chemistry Chemical Physics · doi:10.1039/b807841f · Cited by 2
Self-citationShih, C.-Y., Shugaev, M. V., Cheng-ping, W., & Zhigilei, L. V. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/d0cp90142c · Cited by 2
Self-citationKarim, E. T. (2015) · doi:10.18130/v34k3j · Cited by 2
Simon, D. A., Horkovics-Kováts, G. S., Xiang, Y., Battle, R. A., Wang, Y., Abda, J., Papanastasiou, D. K., Stavrakaki, S. M., Ho, H.-Y., Wang, H., et al. (2024) · ChemRxiv · doi:10.26434/chemrxiv-2023-p2g9h-v3 · Cited by 2
Optical properties of furnace-sintered silver nanoparticles with different sizes
Lee, H.-L., Sim, H. J., Moon, Y.-J., Hwang, J. Y., & Moon, S. J. (2025) · Applied Physics A · doi:10.1007/s00339-025-08539-2 · Cited by 1
Su, L., Zhang, Y., Liu, S., Zhu, X., Guo, W., & Dong, Y. (2025) · Optical Materials Express · doi:10.1364/ome.557175 · Cited by 1
Haq, R., Islam, T., Hayder, M. M., Chowdhury, S., & Rahman, K. A. (2025) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/1361-651x/ae1e1b · Cited by 1
Laser-based synthesis of nanoparticles: role of laser parameters and background conditions
Itina, T., Povarnitsyn, M. E., & Voloshko, A. (2014) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2038481 · Cited by 1
Application of Liquid Laser Ablation: Organic Nanoparticle Formation and Hydrogen Gas Generation
Akimoto, I., & Ozaki, N. (2016) · InTech eBooks · doi:10.5772/64939 · Cited by 1
“The size of the nanoparticles can be controlled by the ablation conditions such as the irradiated laser fluence [15], laser pulse duration [16], and wavelength [10].”
BackgroundSingle cell manipulation utilizing femtosecond laser-induced shock and stress waves
Hosokawa, Y. (2017) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2260794 · Cited by 1
“Especially, the mechanism for femtosecond laser irradiation has been detailed based on photomechanical mechanism of femtosecond laser ablation [3-8], which should be schematically summarized as shown in figure.”
BackgroundPicosecond laser ablation of metals and semiconductors with low-transverse order Gaussian beams
Woerkom, T. A. V., Perram, G. P., Dolasinski, B. D., Phelps, C. D., & Berry, P. A. (2020) · Optical Engineering · doi:10.1117/1.oe.60.3.031002 · Cited by 1
“Molecular dynamics simulations of ps laser ablation show that phase explosion is the dominant mass removal mechanism, and for pulse durations shorter than the mechanical equilibrium time of the material, mass removal is enhanced by stress confinement.(8,9) Lorazo et al.”
BackgroundSano, T. (2020) · Springer series in materials science · doi:10.1007/978-3-030-59313-1_5 · Cited by 1
ArF-excimer laser as a potential tool for manufacturing of biomedical polymeric devices
Stepak, B. D., Kobielarz, M., Gazińska, M. A., Szustakiewicz, K., Pezowicz, C. A., & Antończak, A. J. (2021) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2021.64 · Cited by 1
“Otherwise, depending on the frequency of radiation, higher energy states are induced either within the electronic subnetwork (mainly the UV band) or as a result of a direct photon-phonon coupling (middle infrared (MIR) range) directly by ion polarization [37].”
Lee, H.-L., Sim, I., Moon, Y.-J., Kang, H., Hwang, J. Y., & Moon, S. J. (2024) · Applied Physics A · doi:10.1007/s00339-024-07877-x · Cited by 1
“The ns PLA process is a thermal process in which the main ablation mechanism is proposed to be phase transitions such as explosive boiling, normal boiling, and recoalescence after melting [12–14].”
Ray, C. L., & Freye, C. E. (2025) · Analytical Chemistry · doi:10.1021/acs.analchem.5c01484 · Cited by 1
Classical dynamics of impulsively driven collisional energy transfer
Roberts, G. O. (2001) · Physical Review A · doi:10.1103/physreva.64.042903 · Cited by 1
Koubenakis, A., Venturini, J., & Georgiou, S. K. (2002) · Applied Surface Science · doi:10.1016/s0169-4332(02)00307-0 · Cited by 1
Pieterse, C. L., Busse, F., Tellkamp, F., Robertson, W. D., & Miller, R. J. D. (2018) · ChemRxiv · doi:10.26434/chemrxiv.6450380.v1 · Cited by 1
Nanosecond Infrared Laser Ablation Dynamics
Kankanamalage, A. P. D. (2023) · Louisiana State University · doi:10.31390/gradschool_dissertations.6119 · Cited by 1
Faccinetto, A. (2009) · theses.fr (ABES) · doi:10.70675/ab685ed6z51dfz42e3z829fzd406d63da9a3 · Cited by 1
Saleh, A. A. (2019) · theses.fr (ABES) · doi:10.70675/85dc5526z0fa0z49e0za428z911223e2809d · Cited by 1
Advanced Materials Design Using Lasers
Sano, T., & Hirose, A. (2012) · Springer eBooks · doi:10.1007/978-4-431-54064-9_4
Mesoscale laser processing using excimer and short-pulse Ti:Sapphire lasers
Shirk, M. D., Rubenchik, A. M., Gilmer, G. H., Stuart, B. C., Armstrong, J. P., Oberhelman, S., Baker, S. L., Nikitin, A. J., & Mariella, R. P. (2003) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5060140
“Previous workers have used techniques such as simulating the trajectories of particles instead of individual atoms; such particles that represent groups of atoms are the fundamental unit of the simulations [9].”
MethodA study of femtosecond laser in glaucoma treatment : energy deposition and thermal increase
Hou, D. (2007) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/35975
“If the energy is lower than this "threshold", the material will not be damaged [67,68].”
BackgroundWang, B. (2015) · Human Biology
Butikova, J. (2009) · E-resource repository of the University of Latvia (University of Latvia)
Laser processing of organic materials
Mao, S. S., & Grigoropoulos, C. P. (2009) · Cambridge University Press eBooks · doi:10.1017/cbo9780511596674.010
Fast force loading on biological cell driven by femtosecond laser and its applications
Hosokawa, Y. (2016) · International Symposium on Micro-NanoMechatronics and Human Science · doi:10.1109/mhs.2016.7824215
“Especially, the mechanism for femtosecond laser irradiation has been detailed on the basis of photomechanical mechanism of femtosecond laser ablation [3-8], which should be schematically summarized as shown in Fig.”
Background
Metadata
- Authors
- Zhigilei, L. V., & Garrison, B. J.
- Affiliations
- Pennsylvania State University (US)
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2000-08-01
- Volume
- 88
- Issue
- 3
- Pages
- 1281-1298
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2036945414
- Cited by
- 425
- References
- 70
- Citations by year
- 2026: 2 · 2025: 15 · 2024: 11 · 2023: 18 · 2022: 1 · 2021: 13 · 2020: 14 · 2019: 16 · 2018: 15 · 2017: 12 · 2016: 17 · 2015: 13 · 2014: 22 · 2013: 22 · 2012: 15
- FWCI
- 30.82
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Applied Physics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Laser-Matter Interactions and Applications
- Keywords
- laser ablation, organic solids, thermal confinement, stress confinement, material ejection, phase explosion, photomechanical effect, droplets, acoustic waves, laser fluence threshold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.