The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Structured surfaces for enhanced pool boiling heat transfer
Abstract
We experimentally investigated surface roughness-augmented wettability on critical heat flux (CHF) during pool boiling with horizontally oriented surfaces. Microstructured surfaces with a wide range of well-defined surface roughness were fabricated, and a maximum CHF of ∼208 W/cm2 was achieved with a surface roughness of ∼6. An analytical force-balance model was extended to explain the CHF enhancement. The excellent agreement found between the model and experimental data supports the idea that roughness-amplified capillary forces are responsible for the CHF enhancement on structured surfaces. The insights gained from this work suggest design guidelines for new surface technologies with high heat removal capability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Energy dissipation and transport in nanoscale devices
Pop, E. (2010) · Nano Research · doi:10.1007/s12274-010-1019-z · Cited by 1,169
Surface wettability change during pool boiling of nanofluids and its effect on critical heat flux
Kim, S. J., Bang, I. C., Buongiorno, J., & Hu, L.-W. (2007) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2007.02.002 · Cited by 858
Nanowires for Enhanced Boiling Heat Transfer
Chen, R., Lu, M.-C., Srinivasan, V., Wang, Z., Cho, H. H., & Majumdar, A. (2009) · Nano Letters · doi:10.1021/nl8026857 · Cited by 699
Dhir, V. K. (1998) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.30.1.365 · Cited by 662
Forrest, E., Williamson, E., Buongiorno, J., Hu, L.-W., Rubner, M., & Cohen, R. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.10.008 · Cited by 301
Prediction and Optimization of Liquid Propagation in Micropillar Arrays
Xiao, R., Enright, R., & Wang, E. N. (2010) · Langmuir · doi:10.1021/la102645u · Cited by 194
Self-citationCritical heat flux of pool boiling on Si nanowire array-coated surfaces
Lu, M.-C., Chen, R., Srinivasan, V., Carey, V. P., & Majumdar, A. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.08.007 · Cited by 191
A review of selected thermal management solutions for military electronic systems
Price, D. C. (2003) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2003.811464 · Cited by 68
Cited by
Nanoengineered materials for liquid–vapour phase-change heat transfer
Cho, H. J., Preston, D. J., Zhu, Y., & Wang, E. N. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.92 · Cited by 657
Self-citationGraphene-based macroscopic assemblies and architectures: an emerging material system
Cong, H.-P., Chen, J.-F., & Yu, S.-H. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00181h · Cited by 461
Dong, L., Quan, X., & Cheng, P. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.11.068 · Cited by 321
Bioinspired Engineering of Thermal Materials
Tao, P., Shang, W., Song, C., Shen, Q., Zhang, F., Luo, Z., Yi, N., Zhang, D., & Deng, T. (2015) · Advanced Materials · doi:10.1002/adma.201401449 · Cited by 311
Wetting States and Departure Diameters of Bubbles on Micro-/Nanostructured Surfaces
Li, J., Gong, S., Zhang, L., Cheng, P., Ma, X., & Hong, F. (2022) · Langmuir · doi:10.1021/acs.langmuir.1c03212 · Cited by 36
Metadata
- Authors
- Chu, K.-H., Enright, R., & Wang, E. N.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2012-06-11
- Volume
- 100
- Issue
- 24
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2073714811
- Cited by
- 579
- References
- 9
- FWCI
- 35.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structured surfaces for enhanced pool boiling heat transfer. https://app.cochat.ai/papers/10.1063/1.4724190
- The paper
- Chu, K.-H., Enright, R., & Wang, E. N. (2012). Structured surfaces for enhanced pool boiling heat transfer. Applied Physics Letters. https://doi.org/10.1063/1.4724190
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.