Readout of superconducting nanowire single-photon detectors at high count rates
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Superconducting nanowire single-photon detectors are set apart from other photon counting technologies above all else by their extremely high speed, with few-ten-ps timing resolution, and recovery times τR ≲ 10 ns after a detection event. In this work, however, we identify in the conventional electrical readout scheme a nonlinear interaction between the detector and its readout which can make stable, high-efficiency operation impossible at count rates even an order-of-magnitude less than τR−1. We present detailed experimental confirmation of this, and a theoretical model which quantitatively explains our observations. Finally, we describe an improved readout which circumvents this problem, allowing these detectors to be operated stably at high count rates, with a detection efficiency penalty determined purely by their inductive reset time.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Aspuru-Guzik, A., & Walther, P. (2012) · Nature Physics · doi:10.1038/nphys2253 · Cited by 952
Pernice, W. H. P., Schuck, C., Minaeva, O., Li, M., Goltsman, G. N., Sergienko, A. V., & Tang, H. X. (2012) · Nature Communications · doi:10.1038/ncomms2307 · Cited by 477
Cited by
Photonic quantum information processing: a concise review
Slussarenko, S., & Pryde, G. J. (2019) · Applied Physics Reviews · doi:10.1063/1.5115814 · Cited by 644
“Research on superconducting detectors is still ongoing, aimed at understanding detection mechanisms in different types of nanowire materials, 56–60 improving its performance in terms of reset times 61 and time jitter, 62,63 and developing new methods of accurate detection effi-ciency measurements.”
MethodSuperconducting nanowire single-photon detectors with 98% system detection efficiency at 1550 nm
Reddy, D. V., Nerem, R. R., Nam, S. W., Mirin, R. P., & Verma, V. B. (2020) · Optica · doi:10.1364/optica.400751 · Cited by 403
Resolving photon numbers using a superconducting nanowire with impedance-matching taper
Zhu, D., Colangelo, M., Chen, C., Korzh, B. A., Wong, F. N. C., Shaw, M. D., & Berggren, K. K. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c00985 · Cited by 103
State readout of a trapped ion qubit using a trap-integrated superconducting photon detector
Todaro, S. L., Verma, V. B., McCormick, K. C., Allcock, D. T. C., Mirin, R. P., Wineland, D. J., Nam, S. W., Wilson, A. C., Leibfried, D., & Slichter, D. H. (2021) · Physical Review Letters · doi:10.1103/physrevlett.126.010501 · Cited by 98
Metadata
- Authors
- Kerman, A. J., Rosenberg, D., Molnar, R. J., & Dauler, E. A.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2013-04-11
- Volume
- 113
- Issue
- 14
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1991667892
- Cited by
- 102
- References
- 2
- FWCI
- 4.01
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.