The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Equilibrium behavior of symmetric ABA triblock copolymer melts
Open accessAbstract
Melts of ABA triblock copolymer molecules with identical end blocks are examined using self-consistent field theory (SCFT). Phase diagrams are calculated and compared with those of homologous AB diblock copolymers formed by snipping the triblocks in half. This creates additional end segments which decreases the degree of segregation. Consequently, triblock melts remain ordered to higher temperatures than their diblock counterparts. We also find that middle-block domains are easier to stretch than end-block domains. As a result, domain spacings are slightly larger, the complex phase regions are shifted towards smaller A-segment compositions, and the perforated-lamellar phase becomes more metastable in triblock melts as compared to diblock melts. Although triblock and diblock melts exhibit very similar phase behavior, their mechanical properties can differ substantially due to triblock copolymers that bridge between otherwise disconnected A domains. We evaluate the bridging fraction for lamellar, cylindrical, and spherical morphologies to be about 40%–45%, 60%–65%, and 75%–80%, respectively. These fractions only depend weakly on the degree of segregation and the copolymer composition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Origins of complex self-assembly in block copolymers
Matsen, M. W., & Bates, F. S. (1996) · Macromolecules · doi:10.1021/ma960744q · Cited by 578
Self-citation
Research works printed but not linked: 42
- 1997, J. Chem. Phys., 106, 2436, 10.1063/1.473153 · DOI · Paper page
- 1994, Macromolecules, 27, 2333, 10.1021/ma00086a057 · DOI · Paper page
- 1994, Macromolecules, 27, 6761, 10.1021/ma00101a014 · DOI · Paper page
- 1997, Macromolecules, 30, 3788, 10.1021/ma961673y · DOI · Paper page
- 1998, Macromolecules, 31, 5702, 10.1021/ma9716746 · DOI · Paper page
- 1976, Macromolecules, 9, 879, 10.1021/ma60054a001 · DOI · Paper page
- 1995, J. Chem. Phys., 102, 3884, 10.1063/1.468548 · DOI
- 1992, Macromolecules, 25, 939, 10.1021/ma00028a066 · doi:10.1021/ma00028a066
- 1994, Macromolecules, 27, 6026, 10.1021/ma00099a014 · DOI
- 1995, J. Appl. Polym. Sci., 56, 947, 10.1002/app.1995.070560808 · doi:10.1002/app.1995.070560808
- 1995, Macromolecules, 28, 7653, 10.1021/ma00127a010 · DOI
- 1997, J. Polym. Sci., Part B: Polym. Phys., 35, 2811
- 1997, Macromolecules, 30, 3938, 10.1021/ma970449l · DOI
- 1997, Macromolecules, 30, 5634, 10.1021/ma970266z · DOI
- 1995, Macromolecules, 28, 6007, 10.1021/ma00122a004 · DOI
- 1989, J. Chem. Phys., 91, 7228, 10.1063/1.457290 · DOI · Paper page
- 1991, J. Chem. Phys., 95, 4670, 10.1063/1.461736 · doi:10.1063/1.461736
- 1994, Macromolecules, 27, 187, 10.1021/ma00079a027 · DOI
- 1995, Macromolecules, 28, 5006, 10.1021/ma00118a032 · DOI
- 1975, J. Chem. Phys., 62, 999, 10.1063/1.430517 · DOI · Paper page
- 1994, Phys. Rev. Lett., 72, 2660, 10.1103/PhysRevLett.72.2660 · DOI · Paper page
- 1996, Macromolecules, 29, 1091, 10.1021/ma951138i · DOI · Paper page
- 1998, J. Phys.: Condens. Matter, 10, 8105
- 1997, J. Polym. Sci., Part B: Polym. Phys., 35, 945, 10.1002/(SICI)1099-0488(19970430)35:6<945::AID-POLB9>3.0.CO;2-G · DOI
- 1989, Macromolecules, 22, 2849, 10.1021/ma00196a054 · doi:10.1021/ma00196a054
- 1998, Macromolecules, 31, 6600, 10.1021/ma980551y · doi:10.1021/ma980551y
- 1993, Macromolecules, 26, 3929, 10.1021/ma00067a031 · doi:10.1021/ma00067a031
- 1993, Macromolecules, 26, 6617, 10.1021/ma00076a047 · DOI · Paper page
- 1998, Macromolecules, 31, 3498, 10.1021/ma971229a · DOI
- 1993, J. Phys. II, 3, 139
- 1998, Macromol. Theory Simul., 7, 333, 10.1002/(SICI)1521-3919(19980501)7:3<333::AID-MATS333>3.0.CO;2-O · DOI
- 1996, Macromolecules, 29, 6487, 10.1021/ma960411t · doi:10.1021/ma960411t
- 1996, Phys. Rev. Lett., 76, 924, 10.1103/PhysRevLett.76.924 · DOI
- 1997, Macromolecules, 30, 1621, 10.1021/ma960610c · doi:10.1021/ma960610c
- 1980, Macromolecules, 13, 1602, 10.1021/ma60078a047 · DOI · Paper page
- 1975, Sov. Phys. JETP, 41, 85
- 1987, J. Chem. Phys., 87, 697, 10.1063/1.453566 · DOI · Paper page
- 1998, J. Chem. Phys., 108, 2989, 10.1063/1.475704 · DOI · Paper page
- 1995, Macromolecules, 28, 8233, 10.1021/ma00128a037 · DOI
- 1994, Phys. Rev. Lett., 73, 3235, 10.1103/PhysRevLett.73.3235 · DOI
- 1996, J. Chem. Phys., 104, 7758, 10.1063/1.471481 · DOI
- 1996, Phys. Rev. Lett., 77, 302, 10.1103/PhysRevLett.77.302 · doi:10.1103/physrevlett.77.302
Cited by
Influence of Polydispersity on the Self-Assembly of Diblock Copolymers
Lynd, N. A., & Hillmyer, M. A. (2005) · Macromolecules · doi:10.1021/ma051025r · Cited by 309
Rodwogin, M. D., Spanjers, C. S., Leighton, C., & Hillmyer, M. A. (2010) · ACS Nano · doi:10.1021/nn901190a · Cited by 140
Polylactide–Poly(6-methyl-ε-caprolactone)–Polylactide Thermoplastic Elastomers
Martello, M. T., & Hillmyer, M. A. (2011) · Macromolecules · doi:10.1021/ma201063t · Cited by 137
Sustainable Poly(lactide-b-butadiene) Multiblock Copolymers with Enhanced Mechanical Properties
Lee, I., Panthani, T. R., & Bates, F. S. (2013) · Macromolecules · doi:10.1021/ma401508b · Cited by 117
Daoulas, K. C., Theodorou, D. N., Roos, A., & Creton, C. (2004) · Macromolecules · doi:10.1021/ma035383a · Cited by 41
Metadata
- Authors
- Matsen, M. W., & Thompson, R. B.
- Venue
- The Journal of Chemical Physics
- Publisher
- AIP Publishing
- Published
- 1999-10-15
- Volume
- 111
- Issue
- 15
- Pages
- 7139-7146
- ISSN
- 0021-9606 (ISSN-L)
- 1089-7690
- OpenAlex
- W2055144274
- Cited by
- 456
- References
- 1
- FWCI
- 4.57
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Equilibrium behavior of symmetric ABA triblock copolymer melts. https://app.cochat.ai/papers/10.1063/1.480006
- The paper
- Matsen, M. W., & Thompson, R. B. (1999). Equilibrium behavior of symmetric ABA triblock copolymer melts. The Journal of Chemical Physics. https://doi.org/10.1063/1.480006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.