The DOI matches its Crossref record; 157 of the 157 references it cites were found in a registry or an index.
Applications of high throughput (combinatorial) methodologies to electronic, magnetic, optical, and energy-related materials
Abstract
High throughput (combinatorial) materials science methodology is a relatively new research paradigm that offers the promise of rapid and efficient materials screening, optimization, and discovery. The paradigm started in the pharmaceutical industry but was rapidly adopted to accelerate materials research in a wide variety of areas. High throughput experiments are characterized by synthesis of a “library” sample that contains the materials variation of interest (typically composition), and rapid and localized measurement schemes that result in massive data sets. Because the data are collected at the same time on the same “library” sample, they can be highly uniform with respect to fixed processing parameters. This article critically reviews the literature pertaining to applications of combinatorial materials science for electronic, magnetic, optical, and energy-related materials. It is expected that high throughput methodologies will facilitate commercialization of novel materials for these critically important applications. Despite the overwhelming evidence presented in this paper that high throughput studies can effectively inform commercial practice, in our perception, it remains an underutilized research and development tool. Part of this perception may be due to the inaccessibility of proprietary industrial research and development practices, but clearly the initial cost and availability of high throughput laboratory equipment plays a role. Combinatorial materials science has traditionally been focused on materials discovery, screening, and optimization to combat the extremely high cost and long development times for new materials and their introduction into commerce. Going forward, combinatorial materials science will also be driven by other needs such as materials substitution and experimental verification of materials properties predicted by modeling and simulation, which have recently received much attention with the advent of the Materials Genome Initiative. Thus, the challenge for combinatorial methodology will be the effective coupling of synthesis, characterization and theory, and the ability to rapidly manage large amounts of data in a variety of formats.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Possible highT c superconductivity in the Ba?La?Cu?O system
Bednorz, J. G., & M�ller, K. A. (1986) · Zeitschrift f�r Physik B Condensed Matter · doi:10.1007/bf01303701 · Cited by 14,319
Hydrogen-storage materials for mobile applications
Schlapbach, L., & Züttel, A. (2001) · Nature · doi:10.1038/35104634 · Cited by 8,865
High-κ gate dielectrics: Current status and materials properties considerations
Wilk, G. D., Wallace, R. M., & Anthony, J. M. (2001) · Journal of Applied Physics · doi:10.1063/1.1361065 · Cited by 5,924
New Class of Materials: Half-Metallic Ferromagnets
de Groot, R. A., Mueller, F. M., Engen, P. G. V., & Buschow, K. H. J. (1983) · Physical Review Letters · doi:10.1103/physrevlett.50.2024 · Cited by 4,730
Physics and Applications of Bismuth Ferrite
Catalan, G., & Scott, J. F. (2009) · Advanced Materials · doi:10.1002/adma.200802849 · Cited by 4,234
Indirect Exchange Coupling of Nuclear Magnetic Moments by Conduction Electrons
Ruderman, M. A., & Kittel, C. (1954) · Physical Review · doi:10.1103/physrev.96.99 · Cited by 3,815
The MN+1AXN phases: A new class of solids
Barsoum, M. W. (2000) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(00)00006-6 · Cited by 3,665
Phase-change materials for rewriteable data storage
Wuttig, M., & Yamada, N. (2007) · Nature Materials · doi:10.1038/nmat2009 · Cited by 3,655
Magnetic Properties of Cu-Mn Alloys
Yosida, K. (1957) · Physical Review · doi:10.1103/physrev.106.893 · Cited by 3,182
Cited by
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Exploration and Development of High Entropy Alloys for Structural Applications
Miracle, D., Miller, J., Senkov, O., Woodward, C., Uchic, M., & Tiley, J. (2014) · Entropy · doi:10.3390/e16010494 · Cited by 1,012
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
Self-Driving Laboratories for Chemistry and Materials Science
Tom, G., Schmid, S. P., Baird, S. G., Cao, Y., Darvish, K., Hao, H., Lo, S., Pablo-García, S., Rajaonson, E. M., Skreta, M., et al. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00055 · Cited by 707
Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., et al. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100947 · Cited by 626
New frontiers for the materials genome initiative
de Pablo, J. J., Jackson, N. E., Webb, M. A., Chen, L.-Q., Moore, J. E., Morgan, D., Jacobs, R., Pollock, T., Schlom, D. G., Toberer, E. S., et al. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0173-4 · Cited by 562
Ren, F., Ward, L., Williams, T., Laws, K. J., Wolverton, C., Hattrick-Simpers, J., & Mehta, A. (2018) · Science Advances · doi:10.1126/sciadv.aaq1566 · Cited by 524
Self-citationJeong, S., Kim, J., & Lee, J. (2020) · Advanced Materials · doi:10.1002/adma.202002075 · Cited by 415
Autonomous experimentation systems for materials development: A community perspective
Stach, E., DeCost, B., Kusne, A. G., Hattrick-Simpers, J., Brown, K. A., Reyes, K. G., Schrier, J., Billinge, S., Buonassisi, T., Foster, I., et al. (2021) · Matter · doi:10.1016/j.matt.2021.06.036 · Cited by 398
Self-citationLudwig, A. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0205-0 · Cited by 357
Practical High-Throughput Experimentation for Chemists
Shevlin, M. (2017) · ACS Medicinal Chemistry Letters · doi:10.1021/acsmedchemlett.7b00165 · Cited by 354
The 2019 materials by design roadmap
Alberi, K., Nardelli, M. B., Zakutayev, A., Mitas, L., Curtarolo, S., Jain, A., Fornari, M., Marzari, N., Takeuchi, I., Green, M. L., et al. (2019) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/aad926 · Cited by 322
Self-citationAutonomous Discovery in the Chemical Sciences Part I: Progress
Coley, C. W., Eyke, N. S., & Jensen, K. F. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909987 · Cited by 317
Green, M. L., Choi, C. L., Hattrick-Simpers, J. R., Joshi, A. M., Takeuchi, I., Barron, S. C., Campo, E., Chiang, T., Empedocles, S., Gregoire, J. M., et al. (2017) · Applied Physics Reviews · doi:10.1063/1.4977487 · Cited by 315
Self-citationHigh-entropy functional materials
Gao, M. C., Miracle, D. B., Maurice, D., Yan, X., Zhang, Y., & Hawk, J. A. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.323 · Cited by 306
Machine Learning in Materials Science: Recent Progress and Emerging Applications
Mueller, T., Kusne, A. G., & Ramprasad, R. (2016) · Reviews in Computational Chemistry · doi:10.1002/9781119148739.ch4 · Cited by 295
Cements in the 21 st century: Challenges, perspectives, and opportunities
Biernacki, J. J., Bullard, J. W., Sant, G., Brown, K., Glasser, F. P., Jones, S., Ley, T., Livingston, R., Nicoleau, L., Olek, J., et al. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14948 · Cited by 276
Analyzing machine learning models to accelerate generation of fundamental materials insights
Umehara, M., Stein, H. S., Guevarra, D., Newhouse, P. F., Boyd, D. A., & Gregoire, J. M. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0172-5 · Cited by 91
Suram, S. K., Xue, Y., Bai, J., Le Bras, R., Rappazzo, B., Bernstein, R., Bjorck, J., Zhou, L., van Dover, R. B., Gomes, C. P., et al. (2017) · ACS Combinatorial Science · doi:10.1021/acscombsci.6b00153 · Cited by 80
Phase‐Mapper: Accelerating Materials Discovery with AI
Bai, J., Xue, Y., Bjorck, J., Bras, R. L., Rappazzo, B., Bernstein, R., Suram, S. K., van Dover, R. B., Gregoire, J. M., & Gomes, C. P. (2018) · AI Magazine · doi:10.1609/aimag.v39i1.2785 · Cited by 25
Metadata
- Authors
- Green, M. L., Takeuchi, I., & Hattrick-Simpers, J. R.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2013-06-17
- Volume
- 113
- Issue
- 23
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2059920936
- Cited by
- 259
- References
- 157
- FWCI
- 10.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.