The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Near edge X-ray absorption fine structure measurements (XANES) and extended x-ray absorption fine structure measurements (EXAFS) of the valence state and coordination of antimony in doped nanocrystalline SnO2
Abstract
Colloids of nanocrystalline tin dioxide containing 9.1 at. % and 16.7 at. % antimony have been prepared by the coprecipitation method. High-resolution transmission electron microscopy (TEM) images show crystalline particles in the 2–6 nm size regime. X-ray powder diffraction patterns of nanocrystalline powders obtained by drying the colloids and heating to 100 °C indicate the same rutile lattice structure known from bulk SnO2. On heating to 500 °C in air, the nanocrystalline powder shows a slight increase in particle size but especially a change in color from yellowish to bluish which is accompanied by the development of n-type conductivity. The coordination of antimony in the SnO2 nanocrystallites has been investigated by extended x-ray absorption fine structure measurements (EXAFS) at the Sb K-edge at 5 K while its valence state was determined by near edge x-ray absorption fine structure measurements (XANES) at the Sb L1 edge. The Sb higher neighbor shell distances in the doped material differ from the corresponding distances in Sb2O3 or Sb2O5 but are identical to those in tin dioxide, indicating that antimony is almost completely incorporated into the tin dioxide lattice despite the high doping level. XANES measurements reveal that a large fraction of SbIII employed during the synthesis is already oxidized to SbV at low temperatures. On the basis of these observations, a two-step model for the formation of n-conductive Sb-doped SnO2 nanocrystals is given and quantitatively discussed with respect to the data.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Perspectives on the Physical Chemistry of Semiconductor Nanocrystals
Alivisatos, A. P. (1996) · The Journal of Physical Chemistry · doi:10.1021/jp9535506 · Cited by 3,595
Cited by
The surface and materials science of tin oxide
Batzill, M., & Diebold, U. (2005) · Progress in Surface Science · doi:10.1016/j.progsurf.2005.09.002 · Cited by 2,557
Degler, D., Weimar, U., & Barsan, N. (2019) · ACS Sensors · doi:10.1021/acssensors.9b00975 · Cited by 519
Metadata
- Authors
- Rockenberger, J., zum Felde, U., Tischer, M., Tröger, L., Haase, M., & Weller, H.
- Venue
- The Journal of Chemical Physics
- Publisher
- AIP Publishing
- Published
- 2000-03-01
- Volume
- 112
- Issue
- 9
- Pages
- 4296-4304
- ISSN
- 0021-9606 (ISSN-L)
- 1089-7690
- OpenAlex
- W1987235191
- Cited by
- 189
- References
- 1
- FWCI
- 5.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.