The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
Open accessAbstract
The production of metal parts via laser powder bed fusion additive manufacturing is growing exponentially. However, the transition of this technology from production of prototypes to production of critical parts is hindered by a lack of confidence in the quality of the part. Confidence can be established via a fundamental understanding of the physics of the process. It is generally accepted that this understanding will be increasingly achieved through modeling and simulation. However, there are significant physics, computational, and materials challenges stemming from the broad range of length and time scales and temperature ranges associated with the process. In this paper, we review the current state of the art and describe the challenges that need to be met to achieve the desired fundamental understanding of the physics of the process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Classification and regression trees
Praagman, J. (1985) · European Journal of Operational Research · doi:10.1016/0377-2217(85)90321-2 · Cited by 10,053
Inverse Problem Theory and Methods for Model Parameter Estimation
Tarantola, A. (2005) · doi:10.1137/1.9780898717921 · Cited by 6,585
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Correlation-based Feature Selection for Discrete and Numeric Class Machine Learning
Hall, M. A. (2000) · Cited by 1,715
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Self-citationDesign and Modeling for Computer Experiments
Fang, K.-T., Li, R., & Sudjianto, A. (2005) · Chapman & Hall/CRC eBooks · doi:10.1201/9781420034899 · Cited by 1,138
Design and Analysis of Experiments: Advanced Experimental Design
Hinkelmann, K., & Kempthorne, O. (2005) · Wiley Series in Probability and Statistics · doi:10.1002/0471709948 · Cited by 961
Single track formation in selective laser melting of metal powders
Yadroitsev, I., Gusarov, A., Yadroitsava, I., & Smurov, I. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.05.010 · Cited by 827
Roberts, I. A., Wang, C., Esterlein, R., Stanford, M., & Mynors, D. J. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2009.07.004 · Cited by 796
Hussein, A., Hao, L., Yan, C., & Everson, R. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.05.070 · Cited by 706
(2013) · Medical Entomology and Zoology · Cited by 690
Investigations on residual stresses and deformations in selective laser melting
Zaeh, M. F., & Branner, G. (2010) · Production Engineering · doi:10.1007/s11740-009-0192-y · Cited by 666
Wu, A. S., Brown, D. W., Kumar, M., Gallegos, G. F., & King, W. E. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2549-x · Cited by 657
Self-citationTheoretical Modeling of Rapid Surface Vaporization with Back Pressure
Knight, C. J. (1979) · AIAA Journal · doi:10.2514/3.61164 · Cited by 558
Modeling metal deposition in heat transfer analyses of additive manufacturing processes
Michaleris, P. (2014) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2014.04.003 · Cited by 527
Fast Poisson disk sampling in arbitrary dimensions
Bridson, R. (2007) · ACM SIGGRAPH 2007 sketches · doi:10.1145/1278780.1278807 · Cited by 524
Absorptance of powder materials suitable for laser sintering
Tolochko, N. K., Khlopkov, Y. V., Mozzharov, S. E., Ignatiev, M. B., Laoui, T., & Titov, V. I. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337029 · Cited by 518
Rai, R., Elmer, J. W., Palmer, T. A., & DebRoy, T. (2007) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/40/18/037 · Cited by 473
Mesoscopic simulation of selective beam melting processes
Körner, C., Attar, E., & Heinl, P. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.12.016 · Cited by 450
A first course in design and analysis of experiments
Oehlert, G. W. (2000) · University of Minnesota Digital Conservancy (University of Minnesota) · Cited by 417
Kamath, C., El-dasher, B., Gallegos, G. F., King, W. E., & Sisto, A. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5954-9 · Cited by 395
Self-citationCalculation of laser absorption by metal powders in additive manufacturing
Boley, C. D., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Optics · doi:10.1364/ao.54.002477 · Cited by 371
Self-citationSintering of commercially pure titanium powder with a Nd:YAG laser source
Fischer, P., Romano, V., Weber, H. P., Karapatis, N. P., Boillat, É., & Glardon, R. (2003) · Acta Materialia · doi:10.1016/s1359-6454(02)00567-0 · Cited by 365
Particle-based simulation of powder application in additive manufacturing
Parteli, E. J. R., & Pöschel, T. (2016) · Powder Technology · doi:10.1016/j.powtec.2015.10.035 · Cited by 362
Implementation of a thermomechanical model for the simulation of selective laser melting
Hodge, N. E., Ferencz, R. M., & Solberg, J. M. (2014) · Computational Mechanics · doi:10.1007/s00466-014-1024-2 · Cited by 347
Self-citationThermomechanical Modeling of Additive Manufacturing Large Parts
Denlinger, E. R., Irwin, J., & Michaleris, P. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028669 · Cited by 345
Yadroitsev, I., & Smurov, I. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.083 · Cited by 339
3D FE simulation for temperature evolution in the selective laser sintering process
Kolossov, S., Boillat, É., Glardon, R., Fischer, P., & Locher, M. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2003.10.019 · Cited by 338
Fundamental consolidation mechanisms during selective beam melting of powders
Körner, C., Bauereiß, A., & Attar, E. (2013) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/21/8/085011 · Cited by 323
Matsumoto, M., Shiomi, M., Osakada, K., & Abe, F. (2002) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(01)00093-1 · Cited by 307
Feedback control of Layerwise Laser Melting using optical sensors
Craeghs, T., Bechmann, F., Berumen, S., & Kruth, J.-P. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.078 · Cited by 288
Modeling the interaction of laser radiation with powder bed at selective laser melting
Gusarov, A. V., & Smurov, I. Y. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.065 · Cited by 284
Direct Selective Laser Sintering of Hard Metal Powders: Experimental Study and Simulation
Wang, X. C., Laoui, T., Bonse, J., Kruth, J. P., Lauwers, B., & Froyen, L. (2002) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s001700200024 · Cited by 258
Advances in modeling the effects of selected parameters on the SLS process
Williams, J. D., & Deckard, C. R. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810210257 · Cited by 228
Modelling of radiation transfer in metallic powders at laser treatment
Gusarov, A. V., & Kruth, J.-P. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.01.044 · Cited by 227
Detection of Process Failures in Layerwise Laser Melting with Optical Process Monitoring
Craeghs, T., Clijsters, S., Kruth, J.-P., Bechmann, F., & Ebert, M.-C. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.097 · Cited by 226
Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods
Klassen, A., Scharowsky, T., & Körner, C. (2014) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/47/27/275303 · Cited by 189
Model of thermal conductivity in powder beds
Gusarov, A. V., & Kovalev, E. P. (2009) · Physical Review B · doi:10.1103/physrevb.80.024202 · Cited by 127
3D Finite Element Analysis in the selective laser melting process
Contuzzi, N., Campanelli, S. L., & Ludovico, A. D. (2011) · International Journal of Simulation Modelling · doi:10.2507/ijsimm10(3)1.169 · Cited by 118
Pal, D., Patil, N., Zeng, K., et al. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028580 · Cited by 106
Schilp, J., Seidel, C., Krauss, H., & Weirather, J. (2014) · Advances in Mechanical Engineering · doi:10.1155/2014/217584 · Cited by 70
Kovaleva, I. O., Kovalev, O. B., & Smurov, I. Y. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.143 · Cited by 50
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Self-citationMetal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Metadata
- Authors
- King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M.
- Venue
- Applied Physics Reviews
- Publisher
- AIP Publishing
- Published
- 2015-12
- Volume
- 2
- Issue
- 4
- Pages
- 041304
- ISSN
- 1931-9401 (ISSN-L)
- OpenAlex
- W2210796340
- Cited by
- 1,258
- References
- 43
- FWCI
- 46.42
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.