A method for building low loss multi-layer wiring for superconducting microwave devices
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Complex integrated circuits require multiple wiring layers. In complementary metal-oxide-semiconductor processing, these layers are robustly separated by amorphous dielectrics. These dielectrics would dominate energy loss in superconducting integrated circuits. Here, we describe a procedure that capitalizes on the structural benefits of inter-layer dielectrics during fabrication and mitigates the added loss. We use a deposited inter-layer dielectric throughout fabrication and then etch it away post-fabrication. This technique is compatible with foundry level processing and can be generalized to make many different forms of low-loss wiring. We use this technique to create freestanding aluminum vacuum gap crossovers (airbridges). We characterize the added capacitive loss of these airbridges by connecting ground planes over microwave frequency λ/4 coplanar waveguide resonators and measuring resonator loss. We measure a low power resonator loss of ∼3.9 × 10−8 per bridge, which is 100 times lower than that of dielectric supported bridges. We further characterize these airbridges as crossovers, control line jumpers, and as part of a coupling network in gmon and fluxmon qubits. We measure qubit characteristic lifetimes (T1s) in excess of 30 μs in gmon devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Charge-insensitive qubit design derived from the Cooper pair box
Koch, J., Yu, T. M., Gambetta, J., Houck, A. A., Schuster, D. I., Majer, J., Blais, A., Devoret, M. H., Girvin, S. M., & Schoelkopf, R. J. (2007) · Physical Review A · doi:10.1103/physreva.76.042319 · Cited by 3,351
Controlling the Spontaneous Emission of a Superconducting Transmon Qubit
Houck, A. A., Schreier, J. A., Johnson, B. R., Chow, J. M., Koch, J., Gambetta, J. M., Schuster, D. I., Frunzio, L., Devoret, M. H., Girvin, S. M., et al. (2008) · Physical Review Letters · doi:10.1103/physrevlett.101.080502 · Cited by 501
Planar superconducting resonators with internal quality factors above one million
Megrant, A., Neill, C., Barends, R., Chiaro, B., Chen, Y., Feigl, L., Kelly, J., Lucero, E., Mariantoni, M., O’Malley, P. J. J., et al. (2012) · Applied Physics Letters · doi:10.1063/1.3693409 · Cited by 481
Self-citationQubit compatible superconducting interconnects
Foxen, B., Mutus, J. Y., Lucero, E., Graff, R., Megrant, A., Chen, Y., Quintana, C., Burkett, B., Kelly, J., Jeffrey, E., et al. (2018) · Quantum Science and Technology · doi:10.1088/2058-9565/aa94fc · Cited by 143
Self-citation
Cited by
Strong Quantum Computational Advantage Using a Superconducting Quantum Processor
Wu, Y., Bao, W.-S., Cao, S., Chen, F., Chen, M.-C., Chen, X., Chung, T.-H., Deng, H., Du, Y., Fan, D., et al. (2021) · Physical Review Letters · doi:10.1103/physrevlett.127.180501 · Cited by 1,059
Decoherence benchmarking of superconducting qubits
Burnett, J. J., Bengtsson, A., Scigliuzzo, M., Niepce, D., Kudra, M., Delsing, P., & Bylander, J. (2019) · npj Quantum Information · doi:10.1038/s41534-019-0168-5 · Cited by 384
Encoding Electronic Spectra in Quantum Circuits with Linear T Complexity
Babbush, R., Gidney, C., Berry, D. W., Wiebe, N., McClean, J., Paler, A., Fowler, A., & Neven, H. (2018) · Physical Review X · doi:10.1103/physrevx.8.041015 · Cited by 383
Self-citationBuilding blocks of a flip-chip integrated superconducting quantum processor
Kosen, S., Li, H.-X., Rommel, M., Shiri, D., Warren, C., Grönberg, L., Salonen, J., Abad, T., Biznárová, J., Caputo, M., et al. (2022) · Quantum Science and Technology · doi:10.1088/2058-9565/ac734b · Cited by 88
Improved coherence in optically defined niobium trilayer-junction qubits
Anferov, A., Lee, K.-H., Zhao, F., Simon, J., & Schuster, D. I. (2024) · Physical Review Applied · doi:10.1103/physrevapplied.21.024047 · Cited by 41
Metadata
- Authors
- Dunsworth, A., Barends, R., Chen, Y., Chen, Z., Chiaro, B., Fowler, A., Foxen, B., Jeffrey, E., Kelly, J., Klimov, P. V., Lucero, E., Mutus, J. Y., Neeley, M., Neill, C., Quintana, C., Roushan, P., Sank, D., Vainsencher, A., Wenner, J., White, T. C., Neven, H., Martinis, J. M., & Megrant, A.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2018-02-05
- Volume
- 112
- Issue
- 6
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2775608658
- Cited by
- 57
- References
- 4
- FWCI
- 3.42
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A method for building low loss multi-layer wiring for superconducting microwave devices. https://app.cochat.ai/papers/10.1063/1.5014033
- The paper
- Dunsworth, A., Barends, R., Chen, Y., Chen, Z., Chiaro, B., Fowler, A., Foxen, B., Jeffrey, E., Kelly, J., Klimov, P. V., Lucero, E., Mutus, J. Y., Neeley, M., Neill, C., Quintana, C., Roushan, P., Sank, D., Vainsencher, A., Wenner, J., . . . Megrant, A. (2018). A method for building low loss multi-layer wiring for superconducting microwave devices. Applied Physics Letters. https://doi.org/10.1063/1.5014033
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.