Multi-channel tri-gate normally-on/off AlGaN/GaN MOSHEMTs on Si substrate with high breakdown voltage and low ON-resistance
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In this work, we present multi-channel tri-gate AlGaN/GaN metal-oxide-semiconductor high-electron-mobility transistors (MOSHEMTs) for high-voltage applications. A heterostructure with multiple AlGaN/GaN layers was used to form five parallel two-dimensional-electron-gas (2DEG) channels to reduce the ON-resistance (RON), simultaneously modulated by the 3-dimensional tri-gate electrodes. The tri-gate is a unique technology to control the multi-channels, providing enhanced electrostatics and device performance, and, in turn, the multi-channels are exceptionally suited to address the degradation in drain current (ID,max) caused by the tri-gate. With a tri-gate width (w) of 100 nm, normally-on multi-channel tri-gate transistors presented 3×-higher maximum drain current (ID,max), 47%-smaller RON, as well as 79%-higher maximum transconductance (gm,max), as compared to counterpart single-channel devices. Using the channel depletion through the tri-gate sidewalls, normally-off operation was also achieved by reducing w below the sidewall depletion width (wdep), resulting in a positive threshold voltage (VTH) of 0.82 V at 1 μA/mm. The devices presented a high breakdown voltage (VBR) of 715 V, which reveals a promising future platform for high-voltage low-RON GaN transistors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of Commercial GaN Power Devices and GaN-Based Converter Design Challenges
Jones, E. A., Wang, F. F., & Costinett, D. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2582685 · Cited by 1,259
Cited by
GaN-based power devices: Physics, reliability, and perspectives
Meneghini, M., De Santi, C., Abid, I., Buffolo, M., Cioni, M., Khadar, R. A., Nela, L., Zagni, N., Chini, A., Medjdoub, F., et al. (2021) · Journal of Applied Physics · doi:10.1063/5.0061354 · Cited by 723
Self-citationvan Erp, R., Kampitsis, G., & Matioli, E. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2959736 · Cited by 97
“and high power density owing to their low specific onresistance and high breakdown electric field [4], [5], enabling a compact converter design.”
BackgroundSelf-citationEmbedded Microchannel Cooling for High Power-Density GaN-on-Si Power Integrated Circuits
Erp, R. V., Kampitsis, G., Nela, L., Ardebili, R. S., & Matioli, E. (2020) · 2020 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) · doi:10.1109/itherm45881.2020.9190356 · Cited by 33
“Especially with the introduction of new power transistors and diodes based on GaN superlattice heterostructures, recently proposed in the literature [4], [5], major improvements in the Vbr(2)/Ron figure of merit has been realized.”
BackgroundSelf-citation
Metadata
- Authors
- Ma, J., Erine, C., Xiang, P., Cheng, K., & Matioli, E.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2018-12-10
- Volume
- 113
- Issue
- 24
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2905206606
- Cited by
- 69
- References
- 1
- FWCI
- 4.89
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multi-channel tri-gate normally-on/off AlGaN/GaN MOSHEMTs on Si substrate with high breakdown voltage and low ON-resistance. https://app.cochat.ai/papers/10.1063/1.5064407
- The paper
- Ma, J., Erine, C., Xiang, P., Cheng, K., & Matioli, E. (2018). Multi-channel tri-gate normally-on/off AlGaN/GaN MOSHEMTs on Si substrate with high breakdown voltage and low ON-resistance. Applied Physics Letters. https://doi.org/10.1063/1.5064407
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.