The DOI matches its Crossref record.
Experimental study of the parameters for stable drop-on-demand inkjet performance
Open accessAbstract
We present an experimental study of drop-on-demand inkjet behavior, with particular emphasis on the thresholds for drop generation and formation of satellite drops, using inks covering a range of fluid properties. Drop behavior can be represented as a “phase diagram” in a parameter space bound by the dimensionless number Z (the inverse of the Ohnesorge number) and the Weber number of the fluid jet prior to drop formation, Wej. Stable drop generation is found to be bounded by a parallelogram with minimum and maximum values of 2 < Wej < 25. The lower bound indicates where capillary forces prevent drop ejection, and the upper bound indicates the onset of satellite drop formation. For Z < 50, the critical Wej for drop ejection increases with decreasing Z because of the contribution of viscous dissipation during drop formation. This requires an increase in the voltage required to drive the piezoelectric actuator until at Z ≈ 0.3 no drop ejection is possible. With Z > 4, the value of Wej at which satellite drops form decreases with increasing Z until at very large values of Z single drops can no longer form at any Wej. However, despite the large range of fluid properties over which stable drops can form, the need for a large range of both Z and Wej limits the region of practical ink design to the approximate range of 2 < Z < 20. These results are shown to be compatible with current models of the drop formation process reported in the literature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Fundamental Fluid Dynamics Challenges in Inkjet Printing
Lohse, D. (2022) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-022321-114001 · Cited by 727
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
A review on inkjet printing of nanoparticle inks for flexible electronics
Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497
Metadata
- Authors
- Liu, Y., & Derby, B.
- Venue
- Physics of Fluids
- Publisher
- AIP Publishing
- Published
- 2019-03-01
- Volume
- 31
- Issue
- 3
- ISSN
- 1070-6631 (ISSN-L)
- 1089-7666
- OpenAlex
- W2921183075
- Cited by
- 224
- References
- 0
- FWCI
- 16.40
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Experimental study of the parameters for stable drop-on-demand inkjet performance. https://app.cochat.ai/papers/10.1063/1.5085868
- The paper
- Liu, Y., & Derby, B. (2019). Experimental study of the parameters for stable drop-on-demand inkjet performance. Physics of Fluids. https://doi.org/10.1063/1.5085868
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.