Optimization of Al/AlOx/Al-layer systems for Josephson junctions from a microstructure point of view
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Al/AlOx/Al-layer systems are frequently used for Josephson junction-based superconducting devices. Although much work has been devoted to the optimization of the superconducting properties of these devices, systematic studies on the influence of deposition conditions, combined with structural analyses on the nanoscale, are rare up to now. We have focused on the optimization of the structural properties of Al/AlOx/Al-layer systems deposited on Si(111) substrates with a particular focus on the thickness homogeneity of the AlOx-tunnel barrier. A standard high-vacuum electron-beam deposition system was used, and the effect of substrate pretreatment, different Al-deposition temperatures, and Al-deposition rates was studied. Transmission electron microscopy was applied to analyze the structural properties of the Al/AlOx/Al-layer systems to determine the thickness homogeneity of the AlOx layer, grain-size distribution in the Al layers, Al-grain boundary types, and the morphology of the Al/AlOx interface. We show that the structural properties of the lower Al layer are decisive for the structural quality of the whole Al/AlOx/Al-layer system. Optimum conditions yield an epitaxial Al(111) layer on a Si(111) substrate with an Al-layer thickness variation of only ±1.6 nm over more than 10 μm and large lateral grain sizes up to 1 μm. Thickness fluctuations of the AlOx-tunnel barrier are minimized on such an Al layer, which is essential for the homogeneity of the tunnel current. Systematic variation of the Al-deposition rate and deposition temperature allows one to develop an understanding of the growth mechanisms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Planar superconducting resonators with internal quality factors above one million
Megrant, A., Neill, C., Barends, R., Chiaro, B., Chen, Y., Feigl, L., Kelly, J., Lucero, E., Mariantoni, M., O’Malley, P. J. J., et al. (2012) · Applied Physics Letters · doi:10.1063/1.3693409 · Cited by 481
Wu, Y.-L., Deng, H., Yu, H.-F., Xue, G.-M., Tian, Y., Li, J., Chen, Y.-F., Zhao, S.-P., & Zheng, D.-N. (2013) · Chinese Physics B · doi:10.1088/1674-1056/22/6/060309 · Cited by 18
Cited by
Two-level systems in superconducting quantum devices due to trapped quasiparticles
de Graaf, S. E., Faoro, L., Ioffe, L. B., Mahashabde, S., Burnett, J. J., Lindström, T., Kubatkin, S. E., Danilov, A. V., & Tzalenchuk, A. Y. (2020) · Science Advances · doi:10.1126/sciadv.abc5055 · Cited by 108
Osman, A., Simon, J., Bengtsson, A., Kosen, S., Krantz, P., P. Lozano, D., Scigliuzzo, M., Delsing, P., Bylander, J., & Fadavi Roudsari, A. (2021) · Applied Physics Letters · doi:10.1063/5.0037093 · Cited by 87
Simulating the fabrication of aluminium oxide tunnel junctions
Cyster, M. J., Smith, J. S., Vogt, N., Opletal, G., Russo, S. P., & Cole, J. H. (2021) · npj Quantum Information · doi:10.1038/s41534-020-00360-4 · Cited by 34
Metadata
- Authors
- Fritz, S., Radtke, L., Schneider, R., Weides, M., & Gerthsen, D.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2019-04-22
- Volume
- 125
- Issue
- 16
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2921385150
- Cited by
- 41
- References
- 2
- FWCI
- 1.91
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimization of Al/AlOx/Al-layer systems for Josephson junctions from a microstructure point of view. https://app.cochat.ai/papers/10.1063/1.5089871
- The paper
- Fritz, S., Radtke, L., Schneider, R., Weides, M., & Gerthsen, D. (2019). Optimization of Al/AlOx/Al-layer systems for Josephson junctions from a microstructure point of view. Journal of Applied Physics. https://doi.org/10.1063/1.5089871
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.