The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Capillary effects during droplet impact on a solid surface
Abstract
Impact of water droplets on a flat, solid surface was studied using both experiments and numerical simulation. Liquid–solid contact angle was varied in experiments by adding traces of a surfactant to water. Impacting droplets were photographed and liquid–solid contact diameters and contact angles were measured from photographs. A numerical solution of the Navier–Stokes equation using a modified SOLA-VOF method was used to model droplet deformation. Measured values of dynamic contact angles were used as a boundary condition for the numerical model. Impacting droplets spread on the surface until liquid surface tension and viscosity overcame inertial forces, after which they recoiled off the surface. Adding a surfactant did not affect droplet shape during the initial stages of impact, but did increase maximum spread diameter and reduce recoil height. Comparison of computer generated images of impacting droplets with photographs showed that the numerical model modeled droplet shape evolution correctly. Accurate predictions were obtained for droplet contact diameter during spreading and at equilibrium. The model overpredicted droplet contact diameters during recoil. Assuming that dynamic surface tension of surfactant solutions is constant, equaling that of pure water, gave predicted droplet shapes that best agreed with experimental observations. When the contact angle was assumed constant in the model, equal to the measured equilibrium value, predictions were less accurate. A simple analytical model was developed to predict maximum droplet diameter after impact. Model predictions agreed well with experimental measurements reported in the literature. Capillary effects were shown to be negligible during droplet impact when We≫Re1/2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
White, F. M. (1974) · Cited by 5,899
Liquid—vapor phase-change phenomena
Kenning, D. B. R. (1993) · Chemical Engineering Science · doi:10.1016/0009-2509(93)80320-p · Cited by 1,090
Harlow, F. H., & Shannon, J. P. (1967) · Journal of Applied Physics · doi:10.1063/1.1709031 · Cited by 348
Mathematical modeling of the isothermal impingement of liquid droplets in spraying processes
Trapaga, G., & Szekely, J. (1991) · Metallurgical Transactions B · doi:10.1007/bf02651166 · Cited by 294
Elliott, G. E. P., & Riddiford, A. C. (1967) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(67)90183-x · Cited by 189
Cited by
DROP IMPACT DYNAMICS: Splashing, Spreading, Receding, Bouncing…
Yarin, A. L. (2006) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.38.050304.092144 · Cited by 2,677
Drop Impact on a Solid Surface
Josserand, C., & Thoroddsen, S. T. (2016) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-122414-034401 · Cited by 1,579
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100707 · Cited by 1,093
A review on inkjet printing of nanoparticle inks for flexible electronics
Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497
Kleinhans, U., Wieland, C., Frandsen, F. J., & Spliethoff, H. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.02.001 · Cited by 487
Heat and fluid flow in high-power LED packaging and applications
Luo, X., Hu, R., Liu, S., & Wang, K. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.05.003 · Cited by 460
On a three-dimensional volume tracking model of droplet impact
Bussmann, M., Mostaghimi, J., & Chandra, S. (1999) · Physics of Fluids · doi:10.1063/1.870005 · Cited by 420
Self-citationOn the Maximum Spreading Diameter of Impacting Droplets on Well-Prepared Solid Surfaces
Ukiwe, C., & Kwok, D. Y. (2005) · Langmuir · doi:10.1021/la0481288 · Cited by 403
Drop impact and wettability: From hydrophilic to superhydrophobic surfaces
Antonini, C., Amirfazli, A., & Marengo, M. (2012) · Physics of Fluids · doi:10.1063/1.4757122 · Cited by 400
Modeling the splash of a droplet impacting a solid surface
Bussmann, M., Chandra, S., & Mostaghimi, J. (2000) · Physics of Fluids · doi:10.1063/1.1321258 · Cited by 381
Self-citationDroplet impact on superhydrophobic surfaces: A review of recent developments
Khojasteh, D., Kazerooni, M., Salarian, S., & Kamali, R. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.07.027 · Cited by 377
On the spreading of impacting drops
Wildeman, S., Visser, C. W., Sun, C., & Lohse, D. (2016) · Journal of Fluid Mechanics · doi:10.1017/jfm.2016.584 · Cited by 371
Fauchais, P., Vardelle, A., & Dussoubs, B. (2001) · Journal of Thermal Spray Technology · doi:10.1361/105996301770349510 · Cited by 334
Lin, S., Zhao, B., Zou, S., Guo, J., Wei, Z., & Chen, L. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.12.086 · Cited by 330
Zhang, S., Huang, J., Cheng, Y., Yang, H., Chen, Z., & Lai, Y. (2017) · Small · doi:10.1002/smll.201701867 · Cited by 328
Inkjet Printing of Highly Loaded Particulate Suspensions
Derby, B., & Reis, N. (2003) · MRS Bulletin · doi:10.1557/mrs2003.230 · Cited by 327
Analysis of impact of droplets on horizontal surfaces
Šikalo, Š., Marengo, M., Tropea, C., & Ganić, E. N. (2002) · Experimental Thermal and Fluid Science · doi:10.1016/s0894-1777(01)00109-1 · Cited by 327
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Lv, X., Ye, F., Cheng, L., Fan, S., & Liu, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.012 · Cited by 302
Deposition of tin droplets on a steel plate: simulations and experiments
Pasandideh-Fard, M., Bhola, R., Chandra, S., & Mostaghimi, J. (1998) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(98)00023-4 · Cited by 290
Self-citationPrint Me An Organ! Why We Are Not There Yet
Ng, W. L., Chua, C. K., & Shen, Y.-F. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101145 · Cited by 287
Dynamics of droplet impact on solid surface with different roughness
Tang, C., Qin, M., Weng, X., Zhang, X., Zhang, P., Li, J., & Huang, Z. (2017) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2017.07.002 · Cited by 264
The splash/non-splash boundary upon a dry surface and thin fluid film
Wal, R. L. V., Berger, G. M., & Mozes, S. D. (2006) · Experiments in Fluids · doi:10.1007/s00348-005-0045-1 · Cited by 255
Metadata
- Authors
- Pasandideh-Fard, M., Qiao, Y. M., Chandra, S., & Mostaghimi, J.
- Venue
- Physics of Fluids
- Publisher
- AIP Publishing
- Published
- 1996-03-01
- Volume
- 8
- Issue
- 3
- Pages
- 650-659
- ISSN
- 1070-6631 (ISSN-L)
- 1089-7666
- OpenAlex
- W2020172200
- Cited by
- 1,364
- References
- 5
- FWCI
- 12.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.