First mushroom-shaped adhesive microstructure: A review
Open accessThe DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
This letter reviews the adhesive and frictional properties of the first mushroom-shaped adhesive microstructure (MSAMS), which has come a long way from inspiration by the attachment devices evolved in beetles to a large-scale industrial production. It was shown to have an that about twice higher pull-off force compared to a smooth control made from the same material measured on smooth substrates. Pull-off forces measured underwater are even higher than those in air. Moreover, it retained adhesive performance over thousands of attachment cycles and initial adhesive capability could be recovered by washing after being contaminated. In shearing, MSAMS exhibits reduced and stabilized friction in comparison with a smooth control, which demonstrated pronounced stick-slip motion, and shows zero pull-off force in a sheared state, allowing the adhesion to be switched on and off. The presence of a fluid in the contact zone showed adhesion enhancement on both smooth and rough substrates. All these features lead us to conclude that MSAMS may have practical potential in a variety of applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of Adhesion Technology
(2011) · Springer eBooks · doi:10.1007/978-3-642-01169-6 · Cited by 883
Frictional adhesion: a new angle on gecko attachment
Autumn, K., Dittmore, A., Santos, D., Spenko, M., & Cutkosky, M. (2006) · Journal of Experimental Biology · doi:10.1242/jeb.02486 · Cited by 651
Attachment Devices of Insect Cuticle
(2002) · Kluwer Academic Publishers eBooks · doi:10.1007/0-306-47515-4 · Cited by 531
Self-citationBiomimetic mushroom-shaped fibrillar adhesive microstructure
Gorb, S., Varenberg, M., Peressadko, A., & Tuma, J. (2007) · Journal of The Royal Society Interface · doi:10.1098/rsif.2006.0164 · Cited by 523
Self-citationContact Shape Controls Adhesion of Bioinspired Fibrillar Surfaces
del Campo, A., Greiner, C., & Arzt, E. (2007) · Langmuir · doi:10.1021/la7010502 · Cited by 465
Design of biomimetic fibrillar interfaces: 2. Mechanics of enhanced adhesion
Hui, C.-Y., Glassmaker, N. J., Tang, T., & Jagota, A. (2004) · Journal of The Royal Society Interface · doi:10.1098/rsif.2004.0005 · Cited by 290
Origin of the superior adhesive performance of mushroom-shaped microstructured surfaces
Carbone, G., Pierro, E., & Gorb, S. N. (2011) · Soft Matter · doi:10.1039/c0sm01482f · Cited by 281
Self-citationParness, A., Soto, D., Esparza, N., Gravish, N., Wilkinson, M., Autumn, K., & Cutkosky, M. (2009) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0048 · Cited by 277
A practical approach to the development of a synthetic Gecko tape
Davies, J., Haq, S., Hawke, T., & Sargent, J. P. (2009) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2008.07.009 · Cited by 174
Shearing of fibrillar adhesive microstructure: friction and shear-related changes in pull-off force
Varenberg, M., & Gorb, S. N. (2007) · Journal of The Royal Society Interface · doi:10.1098/rsif.2007.0222 · Cited by 160
Self-citation
Research works printed but not linked: 3
- Kim, 2006, Appl. Phys. Lett., 89, 26911
- A. E. Kovalev, and S. N. Gorb, in: Proc. 34th Annual Meeting of the Adhesion Society, Savannah, USA.
- K. A. Daltorio, S. Gorb, and A. Peressadko, et al., in: Proc. Int. Conf. Climbing and Walking Robots, 131-138.
Cited by
Arzt, E., Quan, H., McMeeking, R. M., & Hensel, R. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100823 · Cited by 253
Biologically Inspired Mushroom-Shaped Adhesive Microstructures
Heepe, L., & Gorb, S. N. (2011) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-062910-100458 · Cited by 212
Self-citationEngineering Micropatterned Dry Adhesives: From Contact Theory to Handling Applications
Hensel, R., Moh, K., & Arzt, E. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800865 · Cited by 195
Human climbing with efficiently scaled gecko-inspired dry adhesives
Hawkes, E. W., Eason, E. V., Christensen, D. L., & Cutkosky, M. R. (2015) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0675 · Cited by 120
Heepe, L., Kovalev, A. E., Filippov, A. E., & Gorb, S. N. (2013) · Physical Review Letters · doi:10.1103/physrevlett.111.104301 · Cited by 92
Self-citationEisenhaure, J. D., & Kim, S. (2017) · Micromachines · doi:10.3390/mi8040125 · Cited by 83
Nano meets beetles from wing to tiptoe: Versatile tools for smart and reversible adhesions
Pang, C., Kwak, M. K., Lee, C., Jeong, H. E., Bae, W., & Suh, K. Y. (2012) · Nano Today · doi:10.1016/j.nantod.2012.10.009 · Cited by 69
Tinnemann, V., Hernández, L., Fischer, S. C. L., Arzt, E., Bennewitz, R., & Hensel, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807713 · Cited by 59
Funnel‐Shaped Microstructures for Strong Reversible Adhesion
Fischer, S. C. L., Groß, K., Abad, O. T., Becker, M. M., Park, E., Hensel, R., & Arzt, E. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700292 · Cited by 57
Adhesion control by inflation: implications from biology to artificial attachment device
Dening, K., Heepe, L., Afferrante, L., Carbone, G., & Gorb, S. N. (2014) · Applied Physics A · doi:10.1007/s00339-014-8504-2 · Cited by 55
Self-citationAdhesion tilt-tolerance in bio-inspired mushroom-shaped adhesive microstructure
Heepe, L., Carbone, G., Pierro, E., Kovalev, A. E., & Gorb, S. N. (2014) · Applied Physics Letters · doi:10.1063/1.4860991 · Cited by 45
Self-citationEffect of counterface roughness on adhesion of mushroom-shaped microstructure
Kasem, H., & Varenberg, M. (2013) · Journal of The Royal Society Interface · doi:10.1098/rsif.2013.0620 · Cited by 44
Self-citationElectrostatic self-cleaning gecko-like adhesives
Alizadehyazdi, V., Modabberifar, M., Akherat, S. M. J. M., & Spenko, M. J. (2018) · Journal of The Royal Society Interface · doi:10.1098/rsif.2017.0714 · Cited by 44
Applications of Bioinspired Reversible Dry and Wet Adhesives: A Review
Kang, M., Sun, K., Seong, M., Hwang, I., Jang, H., Park, S., Choi, G., Lee, S., Kim, J., & Jeong, H. E. (2021) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2021.668262 · Cited by 38
Walking inverted on ceilings with wheel-legs and micro-structured adhesives
Breckwoldt, W. A., Daltorio, K. A., Heepe, L., Horchler, A. D., Gorb, S. N., & Quinn, R. D. (2015) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2015.7353837 · Cited by 35
Self-citationA Gecko-Inspired Soft Passive Gripper
Seibel, A., Yıldız, M., & Zorlubaş, B. (2020) · Biomimetics · doi:10.3390/biomimetics5020012 · Cited by 31
Mini Review: Comparison of Bio-Inspired Adhesive Feet of Climbing Robots on Smooth Vertical Surfaces
Borijindakul, P., Ji, A., Dai, Z., Gorb, S. N., & Manoonpong, P. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.765718 · Cited by 23
Self-citationBadler, D., Goltsberg, R., Ammar, A. A., & Kasem, H. (2023) · Tribology International · doi:10.1016/j.triboint.2023.108609 · Cited by 19
Biological Fibrillar Adhesives: Functional Principles and Biomimetic Applications
Gorb, S. N., & Heepe, L. (2017) · Springer eBooks · doi:10.1007/978-3-319-42087-5_54-2 · Cited by 19
Self-citationContact Aging Enhances Adhesion of Micropatterned Silicone Adhesives to Glass Substrates
Thiemecke, J., & Hensel, R. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005826 · Cited by 19
An adhesion model for contact electrification
Xu, Y., Wu, S., Zhu, Y., & Wu, J. (2024) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2024.109280 · Cited by 18
Remote Wind Turbine Inspections: Exploring the Potential of Multimodal Drones
Omara, A., Nasser, A. G., Alsayed, A., & Nabawy, M. R. A. (2024) · Drones · doi:10.3390/drones9010004 · Cited by 14
Enhanced Directional Adhesion Behavior of Mushroom-Shaped Microline Arrays
Kim, J. H., Jeong, H. E., Kim, S. M., & Kang, S. M. (2019) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-019-00112-6 · Cited by 14
Manufacturing Approaches and Applications for Bioinspired Dry Adhesives: A Path to Commercialization
Sameoto, D. (2017) · Biologically-inspired systems · doi:10.1007/978-3-319-59114-8_11 · Cited by 11
Attachment ability of combined biomimetic adhesive micro-textures of different shapes
Badler, D., Kligerman, Y., & Kasem, H. (2023) · Friction · doi:10.1007/s40544-022-0675-9 · Cited by 10
Mail, M., Walheim, S., Schimmel, T., Barthlott, W., Gorb, S. N., & Heepe, L. (2022) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.13.113 · Cited by 8
Self-citationQatmeera, Z. E., Bajjaly, A., & Kasem, H. (2024) · Biomimetics · doi:10.3390/biomimetics9090542 · Cited by 8
Theoretical optimization of micropillar arrays for structurally stable bioinspired dry adhesives
Ni, K., & Wang, Z. (2024) · Theoretical and Applied Mechanics Letters · doi:10.1016/j.taml.2024.100512 · Cited by 6
Toofani, A., Eraghi, S. H., Basti, A., & Rajabi, H. (2024) · Interface Focus · doi:10.1098/rsfs.2023.0060 · Cited by 6
Interaction of a non-axisymmetric artificial single spatula with rough surfaces
Cheng, Q., Jiang, Z., Borodich, F. M., Gorb, S. N., & Jin, X. (2024) · Interface Focus · doi:10.1098/rsfs.2023.0081 · Cited by 6
Self-citationMicrometer-Sized Suction Cup Array with Strong Adhesion to Wet Surface
Nguyen, T., & Shimoyama, I. (2019) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2019.8808743 · Cited by 6
Releasing principles for dry-adhesive handling of microobjects
Meiners, F., & Tracht, K. (2020) · Procedia CIRP · doi:10.1016/j.procir.2020.02.206 · Cited by 5
Wang, Y., Hensel, R., & Arzt, E. (2022) · Journal of The Royal Society Interface · doi:10.1098/rsif.2022.0050 · Cited by 5
Biological Fibrillar Adhesives: Functional Principles and Biomimetic Applications
Gorb, S. N., & Heepe, L. (2018) · Springer eBooks · doi:10.1007/978-3-319-55411-2_54 · Cited by 3
Self-citationNagahama, S., Nakao, A., & Sugano, S. (2022) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros47612.2022.9981232 · Cited by 2
Badler, D., Kligerman, Y., Ammar, A. A., & Kasem, H. (2023) · Biotribology · doi:10.1016/j.biotri.2023.100234 · Cited by 2
Bhushan, B. (2018) · Springer series in materials science · doi:10.1007/978-3-319-71676-3_19 · Cited by 1
Editorial: Mechanics of biological and bio-inspired materials
Ji, B. (2012) · Theoretical and Applied Mechanics Letters · doi:10.1063/2.1201401 · Cited by 1
Strong but Slippery Adhesion of Mushroom-Shaped Polysaccharide Gels
Tanaka, Y., & Nakamichi, T. (2016) · Mathematics for industry · doi:10.1007/978-981-10-2633-1_1
Bhushan, B. (2016) · Biological and medical physics, biomedical engineering · doi:10.1007/978-3-319-28284-8_13
Bhushan, B. (2024) · Springer eBooks · doi:10.1007/978-3-031-62344-8_12
Voigt, D., Thieme, T., Gloyna, K., Buuk, C., & Gorb, S. N. (2025) · Journal of Insect Physiology · doi:10.1016/j.jinsphys.2025.104835
Self-citationEvaluating COTS components for the LIZARD payload on micropatterned dry adhesives
Ziemer, L., Lobas, S., Clermont, V. M., Helgesson, S., Ben‐Larbi, M. K., & Stoll, E. (2026) · CEAS Space Journal · doi:10.1007/s12567-026-00776-2
Dynamic Adhesion and Self-cleaning Mechanisms of Gecko Setae and Spatulae
Xu, Q. (2013) · University of North Texas Digital Library (University of North Texas) · doi:10.12794/metadc407812
Metadata
- Authors
- Heepe, L., Kovalev, A. E., Varenberg, M., Tuma, J., & Gorb, S. N.
- Affiliations
- Christian-Albrechts-Universität zu Kiel (DE)
- Technion – Israel Institute of Technology (IL)
- Corresponding author
- Gorb, S.N.
- Venue
- Theoretical and Applied Mechanics Letters
- Publisher
- Elsevier BV
- Published
- 2012
- Volume
- 2
- Issue
- 1
- Pages
- 014008
- ISSN
- 2095-0349 (ISSN-L)
- OpenAlex
- W2070738351
- Cited by
- 44
- References
- 16
- Citations by year
- 2025: 1 · 2024: 7 · 2023: 3 · 2022: 3 · 2021: 4 · 2020: 3 · 2019: 3 · 2018: 4 · 2017: 4 · 2016: 2 · 2015: 1 · 2014: 3 · 2013: 3 · 2012: 2
- FWCI
- 3.80
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-nc-nd
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- creativecommons.org/licenses/by-nc-nd/4.0/ (vor, 1453 d)
- Locations
- Theoretical and Applied Mechanics Letters (publishedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Surface Modification and Superhydrophobicity
- Keywords
- biomimetic adhesion, pull-off force, wet adhesion, stick-slip, switchable adhesion, rough substrates
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.