The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Design of biomimetic fibrillar interfaces: 2. Mechanics of enhanced adhesion
Open accessAbstract
This study addresses the strength and toughness of generic fibrillar structures. We show that the stress σ c required to pull a fibril out of adhesive contact with a substrate has the form σ c = σ 0 Φ( χ ). In this equation, σ 0 is the interfacial strength, Φ( χ ) is a dimensionless function satisfying 0=Φ( χ )=1 and χ is a dimensionless parameter that depends on the interfacial properties, as well as the fibril stiffness and radius. Pull-off is flaw sensitive for χ ≫1, but is flaw insensitive for χ <1. The important parameter χ also controls the stability of a homogeneously deformed non-fibrillar (flat) interface. Using these results, we show that the work to fail a unit area of fibrillar surface can be much higher than the intrinsic work of adhesion for a flat interface of the same material. In addition, we show that cross-sectional fibril dimensions control the pull-off force, which increases with decreasing fibril radius. Finally, an increase in fibril length is shown to increase the work necessary to separate a fibrillar interface. Besides our calculations involving a single fibril, we study the concept of equal load sharing (ELS) for a perfect interface containing many fibrils. We obtain the practical work of adhesion for an idealized fibrillated interface under equal load sharing. We then analyse the peeling of a fibrillar surface from a rigid substrate and establish a criterion for ELS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Surface energy and the contact of elastic solids
Johnson, K. L., Kendall, K., & Roberts, A. D. (1971) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1971.0141 · Cited by 8,061
Yielding of steel sheets containing slits
Dugdale, D. S. (1960) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(60)90013-2 · Cited by 7,766
The Mathematical Theory of Equilibrium Cracks in Brittle Fracture
Barenblatt, G. I. (1962) · Advances in Applied Mechanics · doi:10.1016/s0065-2156(08)70121-2 · Cited by 5,277
Adhesive force of a single gecko foot-hair
Autumn, K., Liang, Y. A., Hsieh, S. T., Zesch, W., Chan, W. P., Kenny, T. W., Fearing, R., & Full, R. J. (2000) · Nature · doi:10.1038/35015073 · Cited by 2,758
Adhesion of spheres: The JKR-DMT transition using a dugdale model
Maugis, D. (1992) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(92)90285-t · Cited by 2,066
Evidence for van der Waals adhesion in gecko setae
Autumn, K., Sitti, M., Liang, Y. A., Peattie, A. M., Hansen, W. R., Sponberg, S., Kenny, T. W., Fearing, R., Israelachvili, J. N., & Full, R. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.192252799 · Cited by 1,949
Microfabricated adhesive mimicking gecko foot-hair
Geim, A. K., Dubonos, S. V., Grigorieva, I. V., Novoselov, K. S., Zhukov, A. A., & Shapoval, S. Y. (2003) · Nature Materials · doi:10.1038/nmat917 · Cited by 1,329
From micro to nano contacts in biological attachment devices
Arzt, E., Gorb, S., & Spolenak, R. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1534701100 · Cited by 1,149
The strength of highly elastic materials
Lake, G. J., & Thomas, A. G. (1967) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1967.0160 · Cited by 1,012
Intermolecular and Surface Forces
(2011) · doi:10.1016/c2009-0-21560-1 · Cited by 871
Cited by
Fracture and adhesion of soft materials: a review
Creton, C., & Ciccotti, M. (2016) · Reports on Progress in Physics · doi:10.1088/0034-4885/79/4/046601 · Cited by 915
Frictional adhesion: a new angle on gecko attachment
Autumn, K., Dittmore, A., Santos, D., Spenko, M., & Cutkosky, M. (2006) · Journal of Experimental Biology · doi:10.1242/jeb.02486 · Cited by 651
Surface Wrinkles for Smart Adhesion
Chan, E. P., Smith, E. J., Hayward, R. C., & Crosby, A. J. (2008) · Advanced Materials · doi:10.1002/adma.200701530 · Cited by 518
Gecko‐Inspired Surfaces: A Path to Strong and Reversible Dry Adhesives
Boesel, L. F., Greiner, C., Arzt, E., & del Campo, A. (2010) · Advanced Materials · doi:10.1002/adma.200903200 · Cited by 472
Design of biomimetic fibrillar interfaces: 1. Making contact
Glassmaker, N. J., Jagota, A., Hui, C.-Y., & Kim, J. (2004) · Journal of The Royal Society Interface · doi:10.1098/rsif.2004.0004 · Cited by 400
Self-citation
Metadata
- Authors
- Hui, C.-Y., Glassmaker, N. J., Tang, T., & Jagota, A.
- Venue
- Journal of The Royal Society Interface
- Publisher
- The Royal Society
- Published
- 2004-11-22
- Volume
- 1
- Issue
- 1
- Pages
- 35-48
- ISSN
- 1742-5662 (ISSN-L)
- 1742-5689
- OpenAlex
- W2127985834
- Cited by
- 290
- References
- 18
- FWCI
- 30.89
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design of biomimetic fibrillar interfaces: 2. Mechanics of enhanced adhesion. https://app.cochat.ai/papers/10.1098/rsif.2004.0005
- The paper
- Hui, C.-Y., Glassmaker, N. J., Tang, T., & Jagota, A. (2004). Design of biomimetic fibrillar interfaces: 2. Mechanics of enhanced adhesion. Journal of The Royal Society Interface. https://doi.org/10.1098/rsif.2004.0005
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.