Fabrication and performance of Tile transducers for piezoelectric energy harvesting
Open accessThe DOI matches its Crossref record; 22 of the 23 references it cites were found in a registry or an index.
Abstract
In recent years, pavement piezoelectric energy harvesting has become one of the most promising road energy harvesting system clean energy sources. However, it is difficult for existing piezoelectric transducer structures to meet road power generation requirements. In this study, ceramic grinding and polishing techniques were used to make curved piezoelectric ceramic units with controllable curvatures. A new type of Tile transducer for roadway applications was developed in combination with an elastic metal base. Under the action of traffic load, the Tile transducer was subject to both vertical stress and a horizontal tearing force. Laboratory tests were performed on Tile transducers with simply supported and fixed boundary conditions, and the effects of concentrated and uniformly distributed loads on energy harvesting efficiency were analyzed. When the excitation frequency was 6 Hz and the load was 0.7 MPa, the output power of the Plane transducer was 0.23 mW, while that of the Tile transducer was 24.5 times as large at 5.65 mW. The ultimate compressive yield strength of a single Tile transducer could reach 2.18 kN, and the load limit was 1.5 kN at an excitation frequency of 10 Hz. This meets traffic load requirements. The open circuit voltage peak did not decrease substantially when 360 000 cyclic loading processes were performed. This indicated that Tile transducer structural performance was stable and that the transducer was durable. Based on the test results, an effective Tile transducer packaging method is proposed for application in road power generation systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Curved piezoelectric elements have been explored as energy harvesters inside smart tiles, which have a compact size and higher power output than the cantilever harvesters [78].”
From A review of piezoelectric energy harvesting tiles: Available designs and future perspective (2022) · cites this paper as [78]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“Based on the studies, simply supported boundary conditions with concentrated load and a maximum allowable displacement of 0.614 mm were found to be the optimum parameters for the tile packaging.”
From A review of piezoelectric energy harvesting tiles: Available designs and future perspective (2022) · cites this paper as [78]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A piezomagnetoelastic structure for broadband vibration energy harvesting
Erturk, A., Hoffmann, J., & Inman, D. J. (2009) · Applied Physics Letters · doi:10.1063/1.3159815 · Cited by 970
Energy Harvesting Using a Piezoelectric “Cymbal” Transducer in Dynamic Environment
Kim, H. W., Batra, A., Priya, S., Uchino, K., Markley, D., Newnham, R. E., & Hofmann, H. F. (2004) · Japanese Journal of Applied Physics · doi:10.1143/jjap.43.6178 · Cited by 368
Piezoelectric energy harvester for public roadway: On-site installation and evaluation
Xiong, H., & Wang, L. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.031 · Cited by 235
Energy harvesting from asphalt pavement roadways vehicle-induced stresses: A feasibility study
Roshani, H., Dessouky, S., Montoya, A., & Papagiannakis, A. T. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.116 · Cited by 183
Road energy harvester designed as a macro-power source using the piezoelectric effect
Song, Y., Yang, C. H., Hong, S. K., Hwang, S. J., Kim, J. H., Choi, J. Y., Ryu, S. K., & Sung, T. H. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.04.149 · Cited by 161
Ahmad, S., Abdul Mujeebu, M., & Farooqi, M. A. (2019) · International Journal of Energy Research · doi:10.1002/er.4350 · Cited by 142
Development and testing of photovoltaic pavement for heat island mitigation
Efthymiou, C., Santamouris, M., Kolokotsa, D. D., & Koras, A. (2016) · Solar Energy · doi:10.1016/j.solener.2016.01.054 · Cited by 139
A comparative analysis of piezoelectric transducers for harvesting energy from asphalt pavement
ZHAO, H., LING, J., & YU, J. (2012) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.120.317 · Cited by 121
Thin-layer composite unimorph ferroelectric driver and sensor properties
Mossi, K. M., Selby, G. V., & Bryant, R. G. (1998) · Materials Letters · doi:10.1016/s0167-577x(97)00214-0 · Cited by 120
Displacement properties of RAINBOW and THUNDER piezoelectric actuators
Wise, S. A. (1998) · Sensors and Actuators A Physical · doi:10.1016/s0924-4247(97)01745-7 · Cited by 118
Optimized design of layered bridge transducer for piezoelectric energy harvesting from roadway
Jasim, A. F., Wang, H., Yesner, G., Safari, A., & Maher, A. (2017) · Energy · doi:10.1016/j.energy.2017.10.005 · Cited by 115
Jasim, A., Yesner, G., Wang, H., Safari, A., Maher, A., & Basily, B. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.05.040 · Cited by 114
A review on frequency tuning methods for piezoelectric energy harvesting systems
Ibrahim, S., & Ali, W. G. (2012) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4766892 · Cited by 96
Preparation and performance research of stacked piezoelectric energy-harvesting units for pavements
Wang, C., Song, Z., Gao, Z., Yu, G., & Wang, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.11.042 · Cited by 92
Development in Stacked-Array-Type Piezoelectric Energy Harvester in Asphalt Pavement
Yang, H., Wang, L., Hou, Y., Guo, M., Ye, Z., Tong, X., & Wang, D. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002079 · Cited by 81
Roshani, H., Jagtap, P., Dessouky, S., Montoya, A., & Papagiannakis, A. T. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002112 · Cited by 78
A preliminary study on the highway piezoelectric power supply system
Yang, H., Wang, L., Zhou, B., Wei, Y., & Zhao, Q. (2018) · International Journal of Pavement Research and Technology · doi:10.1016/j.ijprt.2017.08.006 · Cited by 74
Review of non-resonant vibration based energy harvesters for wireless sensor nodes
Khan, F. U. (2016) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4961370 · Cited by 68
Analysis of the manufactured shape of rectangular THUNDER-type actuators
Aimmanee, S., & Hyer, M. W. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/6/010 · Cited by 54
Li, R., Yu, Y. Q., Zhou, B., Guo, Q., Li, M., & Pei, J. (2018) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.5002731 · Cited by 50
Investigation on the factors influencing the performance of piezoelectric energy harvester
Yang, H., Guo, M., Wang, L., Hou, Y., Zhao, Q., Cao, D., Zhou, B., & Wang, D. (2017) · Road Materials and Pavement Design · doi:10.1080/14680629.2017.1329873 · Cited by 46
Effect of subgrade on piezoelectric energy harvesting under traffic loads
Ding, G., Zhao, X., Sun, F., & Wang, J. (2017) · International Journal of Pavement Engineering · doi:10.1080/10298436.2017.1413241 · Cited by 23
Self-citation
Cited by
A review of piezoelectric energy harvesting tiles: Available designs and future perspective
Sharma, S., Kiran, R., Azad, P., & Vaish, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115272 · Cited by 194
An electromagnetic energy harvester for applications in a high-speed rail pavement system
Cao, H., Kong, L., Tang, M., Zhang, Z., Wu, X., Lu, L., & Li, D. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.108018 · Cited by 75
Watt-level road-compatible piezoelectric energy harvester for LED-induced lamp system
Wang, J., Liu, Z., Ding, G., Fu, H., & Cai, G. (2021) · Energy · doi:10.1016/j.energy.2021.120685 · Cited by 60
Self-citationWang, J., Qin, X., Liu, Z., Ding, G., & Cai, G. (2021) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2021.106320 · Cited by 57
Self-citationWang, J., Liu, Z., Shi, K., & Ding, G. (2021) · Smart Materials and Structures · doi:10.1088/1361-665x/ac0c2d · Cited by 44
Self-citation
Metadata
- Authors
- Liu, Z., Ding, G., Wang, J., Cai, G., Qin, X., & Shi, K.
- Affiliations
- Wenzhou University (CN)
- Corresponding author
- Wang, Jun
- Venue
- AIP Advances
- Publisher
- AIP Publishing
- Published
- 2020-04-01
- Volume
- 10
- Issue
- 4
- ISSN
- 2158-3226 (ISSN-L)
- OpenAlex
- W3016525260
- Semantic Scholar
- 2b7749e4a6d507826e1499a1b647b168c600abe4
- Cited by
- 26
- References
- 23
- Citations by year
- 2026: 1 · 2025: 5 · 2024: 3 · 2023: 3 · 2022: 7 · 2021: 7
- FWCI
- 2.09
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0/ (vor, 15 d)
- creativecommons.org/licenses/by/4.0/ (tdm, 15 d)
- Locations
- AIP Advances (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Foundation for Innovative Research Groups of the National Natural Science Foundation of China (51978534, 51622810)
- The Zhejiang Province Natural Foundation Projects of China (LR18E080001 and Number LY18E080027)
- Primary Research and Development Plan of Zhejiang Province (2018C03038)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Engineering › Mechanics of Materials › Ultrasonics and Acoustic Wave Propagation
- Keywords
- piezoelectric energy harvesting, traffic load, concentrated and distributed loads, boundary conditions, output power, durability, cyclic loading
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.