CoChat

Modelling the effects of row configuration on sorghum yield reliability in north-eastern Australia

Whish, Jeremy, Butler, Giles, Castor, Michael, Cawthray, Shayne, Broad, Ian, Carberry, Peter, Hammer, Graeme, McLean, Greg, Routley, Richard, Yeates, Steven · 2005 · Australian Journal of Agricultural Research
Cited by 75

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

In recent years, many sorghum producers in the more marginal (<600 mm annual rainfall) cropping areas of Queensland and northern New South Wales have used skip row configurations in an attempt to improve yield reliability and reduce sorghum production risk. This paper describes modifications made to the APSIM sorghum module to account for the difference in water usage and light interception between alternative crop planting configurations, and then demonstrates how this new model can be used to quantify the long-term benefits of skip sorghum production. Detailed measurements of light interception and water extraction from sorghum crops grown in solid, single and double skip row configurations were collected from on-farm experiments in southern Qld and northern NSW. These measurements underpinned changes to the APSIM-Sorghum model so that it accounted for the elliptical water uptake pattern below the crop row and the reduced total light interception associated with skip row configurations. Long-term simulation runs using long-term weather files for locations near the experimental sites were used to determine the value of skip row sorghum production as a means of maintaining yield reliability. These simulations showed a trade-off between long-term average production (profitability) and annual yield reliability (risk of failure this year). Over the long term, the production of sorghum in a solid configuration produced a higher average yield compared with sorghum produced in a skip configuration. This difference in average yield is a result of the solid configuration having a higher yield potential compared with the skip configurations. Skip configurations limit the yield potential as a safeguard against crop failure. To achieve the higher average yield in the solid configuration the producer suffers some total failures. Skip configurations reduce the chance of total failure by capping the yield potential, which in turn reduces the long-term average yield. The decision on what row configuration to use should be made tactically and requires consideration of the starting soil water, the soil’s plant-available water capacity (PAWC), and the farm family’s current attitude to risk.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1071/ar04128

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 75

Metadata

Authors
Whish, J., Butler, G., Castor, M., Cawthray, S., Broad, I., Carberry, P., Hammer, G., McLean, G., Routley, R., & Yeates, S.
Venue
Australian Journal of Agricultural Research
Published
2005-01-31
Volume
56
Issue
1
Pages
11-23
ISSN
  • 0004-9409 (ISSN-L)
  • 1444-9838
OpenAlex
W2010742279
Cited by
75
References
1
FWCI
2.59
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.