Fluoropolymers: Origin, Production, and Industrial and Commercial Applications
The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
Fluoropolymers have had a profound effect on all aspects of industry since their discovery during the 1930s. This review briefly describes the historical development of the fluoropolymer industry, with a focus on traditional fluoroplastics, and lists the major industrial and commercial materials currently in use. These include polytetrafluoroethylene (PTFE, Teflon), polychlorotrifluoroethylene (PCTFE), fluorinated ethylene propylene (FEP), the ethylene copolymer of tetrafluoroethylene (ETFE), the ethylene copolymer of chlorotrifluoroethylene (ECTFE), perfluoroalkoxy (PFA), polyvinylfluoride (PVF), polyvinyldifluoride (PVDF), Nafion, fluoroethylenevinylether (FEVE), a semicrystalline three component terpolymer of tetrafluoroethylene, hexafluoropropylene, and vinylidene fluoride (THV), Teflon-AF, Cytop, and Hyflon. The production, processing, and properties of these fluoropolymers are discussed, together with examples of the specific uses in chemical industry, manufacturing, electronics, architecture, energy, health and domestic sectors. Other related fluoropolymers such as fluoroelastomers, perfluoropolyethers, and fluorosurfactants are briefly mentioned. Environmental aspects of fluoropolymers are considered as is the current state of the fluoropolymer industry.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Gardiner [3] explains that PFASs are extensively utilized in industrial applications because of their distinctive chemical characteristics, such as excellent thermal stability, resistance to chemical breakdown, water and oil repellency, and low surface energy.”
From Industrial Applications, Environmental Fate, Human Exposure, and Health Effects of PFAS (2025) · cites this paper as [3]
Citations
Cites
Fluorine in medicinal chemistry
Purser, S., Moore, P. R., Swallow, S., & Gouverneur, V. (2008) · Chem. Soc. Rev. · doi:10.1039/b610213c · Cited by 7,570
Encyclopedia of polymer science and technology
(2003) · Choice Reviews Online · doi:10.5860/choice.41-0674 · Cited by 5,095
State of Understanding of Nafion
Mauritz, K. A., & Moore, R. B. (2004) · Chemical Reviews · doi:10.1021/cr0207123 · Cited by 4,791
Understanding organofluorine chemistry. An introduction to the C–F bond
O'Hagan, D. (2008) · Chem. Soc. Rev. · doi:10.1039/b711844a · Cited by 4,045
PEM Fuel Cells: Theory and Practice
Barbir, F. (2012) · Cited by 1,938
Organofluorine Chemistry: Principles and Commercial Applications
(1994) · doi:10.1007/978-1-4899-1202-2 · Cited by 1,691
Parallel cylindrical water nanochannels in Nafion fuel-cell membranes
Schmidt-Rohr, K., & Chen, Q. (2008) · Nature Materials · doi:10.1038/nmat2074 · Cited by 1,371
Organofluorine chemistry : principles and commercial applications
Banks, R. E., SMART, B. E., & Tatlow, J. C. (1994) · Springer eBooks · Cited by 1,105
Chambers, R. D. (2004) · Wiley eBooks · doi:10.1002/9781444305371 · Cited by 1,085
Ameduri, B. (2009) · Chemical Reviews · doi:10.1021/cr800187m · Cited by 830
Research works printed but not linked: 2
- Banks, 1986, J. Fluor. Chem., 33, 2
- Vierke, 2012, Environ. Sci. Eur., 1
Cited by
Items 101–200 of 264
Synthesis and application of new types of fluorinated oxetanes
Deng, Y., & Zou, Y. (2020) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2020.105608 · Cited by 14
Mechanically robust hydrophobic fluorine-doped diamond-like carbon film on glass substrate
Sharifahmadian, O., Pakseresht, A., Mirzaei, S., Eliáš, M., & Galusek, D. (2023) · Diamond and Related Materials · doi:10.1016/j.diamond.2023.110252 · Cited by 13
Compression-Responsive Photonic Crystals Based on Fluorine-Containing Polymers
Kredel, J., & Gallei, M. (2019) · Polymers · doi:10.3390/polym11122114 · Cited by 13
Poly/Perfluorinated Alkyl Substances (PFASs) – Synthetic Methods, Properties and Applications
Walkowiak-Kulikowska, J. (2022) · Royal Society of Chemistry eBooks · doi:10.1039/9781839167591-00022 · Cited by 20
Mei, H., Han, J., White, S., Butler, G., & Soloshonok, V. A. (2019) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2019.109370 · Cited by 13
Tiwari, S., Bag, D. S., Mishra, S., Bajpai, N., & Dwivedi, M. (2024) · Polymer Composites · doi:10.1002/pc.29281 · Cited by 12
Trifoglio, A., Mantovani, S., Khaliha, S., Kovtun, A., Marforio, T. D., Calvaresi, M., & Melucci, M. (2025) · Nanoscale · doi:10.1039/d5nr00502g · Cited by 15
Pan, J. L., Chen, K., Cui, Z., Bamaga, O., Albeirutty, M. H., Alsaiari, A. O., Macedonio, F., & Drioli, E. (2022) · Membranes · doi:10.3390/membranes12010065 · Cited by 12
“Therefore, the ECTFE is also used as an anti-corrosion coating layer of pipes, tubes, and other equipment [25,26].”
MethodZhao, W., Xuan, L., Liu, Y., Yin, J., Wang, H., Yan, Q., Wang, W., Huang, J. L., & Chen, F. (2023) · New Journal of Chemistry · doi:10.1039/d3nj01329d · Cited by 13
Zhao, J., Tian, X., Niu, Q., & Zhang, P. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.125760 · Cited by 12
Fluoropolymer-Containing Opals and Inverse Opals by Melt-Shear Organization
Kredel, J., Dietz, C., & Gallei, M. (2019) · Molecules · doi:10.3390/molecules24020333 · Cited by 12
Guerrero‐Vaca, G., Carrizo-Tejero, D., Rodríguez‐Alabanda, Ó., Romero, P. E., & Molero, E. (2020) · Materials · doi:10.3390/ma13030799 · Cited by 12
“The fluoropolymer-based resins usually used for these coatings are [9]: polytetrafluoroethylene (PTFE), perfluoroalkoxide (PFA), and fluorinated ethylene propylene (FEP).”
BackgroundSurface-process correlation for an ink-jet printed transparent fluoroplastic
Gomez, C., Campanelli, C., Su, R., & Leach, R. (2020) · Surface Topography Metrology and Properties · doi:10.1088/2051-672x/abac1c · Cited by 11
Allylic substitution reactions with fluorinated nucleophiles
Zemtsov, A. A., Levin, V. V., & Dilman, A. D. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214455 · Cited by 11
Yoo, D., Garud, S., Trinh, C. T., Amkreutz, D., & Becker, C. (2021) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2021.3126122 · Cited by 11
Guerrero‐Vaca, G., & Rodríguez‐Alabanda, Ó. (2022) · Polymers · doi:10.3390/polym14214617 · Cited by 11
“Their use has been extended to many applications, among others chemical [1], medical [2], automotive [3], textile, and alimentary [4].”
BackgroundDeng, C., Liu, H., Cui, Y., Zhu, X., Bai, Y., & Hu, Z. Y. (2022) · Polymer · doi:10.1016/j.polymer.2022.125562 · Cited by 11
Evaluation of the effectiveness and durability of commercial non-stick coatings
Guerrero‐Vaca, G., Comino, F., & Rodríguez‐Alabanda, Ó. (2024) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2024.111959 · Cited by 11
Cao, C., Liu, L., Li, Q., Chen, P., Qian, Q., & Chen, Q. (2016) · Polymer Engineering and Science · doi:10.1002/pen.24290 · Cited by 11
Hamaura, J., Hori, H., Fujishima, A., & Mukae, H. (2023) · Molecules · doi:10.3390/molecules28207057 · Cited by 10
Temperature Dependence of the Number of Defect-Structures in Poly(vinylidene fluoride)
Schwaderer, J., Drache, M., & Beuermann, S. (2024) · Molecules · doi:10.3390/molecules29071551 · Cited by 10
“It is characterized by high thermal stability and resistance to acids and UV radiation, as well as low flammability [1,2] and a degree of crystallinity between 35 and 70% [3].”
BackgroundMhaske, S. T., Mohanty, J. D., & Chugh, K. W. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95335-1.00006-2 · Cited by 11
Wouters, B., Miggiels, P., Bezemer, R., van der Cruijsen, E. A. W., van Leeuwen, E., Gauvin, J., Houben, K., Gupta, K. B. S. S., Zuijdwijk, P., Harms, A. C., et al. (2022) · Analytical Chemistry · doi:10.1021/acs.analchem.2c03038 · Cited by 10
C–F bond activation of perfluorinated arenes using NHC-stabilized cobalt half-sandwich complexes
Ertler, D., Kuntze‐Fechner, M. W., Dürr, S., Lubitz, K., & Radius, U. (2021) · New Journal of Chemistry · doi:10.1039/d0nj06137a · Cited by 9
Marin, A., Brito, J., Sukhishvili, S. A., & Andrianov, A. K. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c01099 · Cited by 9
Effects of Nano-Ceramic Particle Addition for Cold Sprayed Fluoropolymer Coatings
Sulen, W. L., Ravi, K., Bernard, C. A., Mary, N., Ichikawa, Y., & Ogawa, K. (2019) · Key engineering materials · doi:10.4028/www.scientific.net/kem.813.141 · Cited by 9
Advanced Non-Metallic Coatings and Composite Materials for O & G Industry
Orlov, M., & Badeghaish, W. O. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1990/1/012001 · Cited by 8
“In terms of chemical resistance to all known aggressive media, ETFE does not dissolve in organic solvents, it is resistant to concentrated acids, alkalis, and oxidizing agents [18].”
BackgroundLi, Y., Wen, J., Wu, T., Cao, C., Meng, X., & Ye, H. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.53028 · Cited by 8
Laser welding of carbon fibre filled polytetrafluoroethylene
Herthoge, M., Pelsmaeker, J. D., Boone, M., Baere, I. D., Paepegem, W. V., & Vlierberghe, S. V. (2020) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2020.116681 · Cited by 8
Direct fluorination of acetyl and ethyl celluloses in perfluorinated liquid medium
Белов, Н. Н., Blinov, I. A., Alentiev, A. Y., Belokhvostov, V. M., Mukhortov, D. A., Chirkov, S. V., Mazur, A. S., Kostina, Y. V., Vozniuk, O. N., Kurapova, E. S., et al. (2020) · Journal of Polymer Research · doi:10.1007/s10965-020-02261-8 · Cited by 8
Vasuta, M. P., Parkerson, Z. J., Oddo, T. D., Rogers, B. R., & Jennings, G. K. (2025) · Langmuir · doi:10.1021/acs.langmuir.4c05253 · Cited by 6
Ding, Y., Chen, W., Liu, M., Wang, X., Li, W., Gao, H., Li, P., & Li, Y. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.168211 · Cited by 7
Influence of initiators on the sintering discolouration of PTFE
Venner, W. V., Puts, G. J., & Crouse, P. L. (2018) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2018.10.017 · Cited by 7
Fluoropolymer-based architectural textiles: production, processing, and characterization
Sonnendecker, A., Viljoen, D., Ameduri, B. M., & Crouse, P. L. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-821873-0.00010-2 · Cited by 7
Zhou, S., Hu, Y., Huang, Y., Xu, H., Wu, D., Wu, D., & Gao, X. (2023) · Polymers · doi:10.3390/polym16010043 · Cited by 7
“Therefore, it is widely used in many fields, including non-stick coating, non-stick pans, sealing material, the chemical industry, the electronics industry, and medical and food processing fields [17].”
BackgroundThe Simulation and Optimization of the Tetrafluoroethylene Rectification Process
Yang, L., Chen, Y., Wang, J., Luo, Y., Zhou, P., & Zhang, X. (2024) · Separations · doi:10.3390/separations11020037 · Cited by 8
“Therefore, TFE plays a crucial role in chemical production [1–4].”
BackgroundLi, C., Tu, Y., Guo, S., & Shen, J. (2025) · Chinese Journal of Polymer Science · doi:10.1007/s10118-025-3317-7 · Cited by 6
Mehta, P. S., Levy, M. B., O’Dea, R. M., Epps, T. H. I., & Watson, M. P. (2025) · Polymer Chemistry · doi:10.1039/d5py00774g · Cited by 8
Fluorinated thermoplastic elastomers
Kumar, D., Dolui, S., Banerjee, S., & Ameduri, B. M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-91758-2.00010-6 · Cited by 7
Li, S., Wang, E., Pei, L., Deb, S., Prabhala, P., Nara, S. H. R., Panda, R., Eltepu, S., Akl, M., McMahan, L., et al. (2024) · Artificial Intelligence Chemistry · doi:10.1016/j.aichem.2024.100078 · Cited by 6
Hori, H., & Hamaura, J. (2021) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2021.109621 · Cited by 6
Dasaradhan, B., Das, B. R., Goswami, T. H., & Prasad, N. E. (2021) · Journal of the Textile Institute · doi:10.1080/00405000.2021.1952806 · Cited by 6
“Fluoro polymers also possess other desirable attributes of coating; excellent chemical resistance, high abrasion resistance, high thermal stability, flame resistance, very low permeation to moisture and gases and low surface tension (Gardiner, 2015; Henry et al., 2018; Wood et al., 2000).”
BackgroundRu, J., Mastan, E., Zhou, L., Shao, C., Zhao, J., Wang, S., & Zhu, S. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c01834 · Cited by 6
Purcar, V., Rădițoiu, V., Raduly, F. M., Rădițoiu, A., Căprărescu, S., Frone, A. N., Şomoghi, R., Anastasescu, M., Stroescu, H., & Nicolae, C. A. (2023) · Applied Sciences · doi:10.3390/app13031669 · Cited by 6
Synthetic Advantages of Defluorinative C−F Bond Functionalization
Hooker, L. V., & Bandar, J. S. (2023) · Angewandte Chemie · doi:10.1002/ange.202308880 · Cited by 8
Alternative dynamic torsion test to evaluate the elastic modulus of polymers
Piedade, L. P., Pintão, C. A. F., Foschini, C. R., da Silva, M. R., & Neto, N. F. A. (2020) · Materials Research Express · doi:10.1088/2053-1591/abb560 · Cited by 6
“Owing to its chemical inertness, thermal stability, non-stick property, and robustmechanical strength [7, 8], this polymer has been employed in differentfields, frommore straightforward applications, such as seals [9], tomore complex structural applications in the aerospace [10], nuclear [11–13] and biomedical industr…”
BackgroundMethodJiang, Z., Zhang, Y., Gong, C.-J., Yao, Z., Shukla, A., & Cao, K. (2020) · Journal of Cellular Plastics · doi:10.1177/0021955x20964003 · Cited by 6
Ameduri, B. M. (2025) · Polymer International · doi:10.1002/pi.70006 · Cited by 8
Fowzi, M., Jafarpisheh, E., Andaluri, G., Ebrahimi, A., & Ebrahimpour, K. (2025) · Environmental Geochemistry and Health · doi:10.1007/s10653-025-02782-5 · Cited by 5
“Finally, PTFE is commonly used for its non-stick properties in cookware coatings and various specialized industrial applications (Gardiner, 2015).”
Li, H., Selyanchyn, R., Fujikawa, S., Kulachenko, A., & Sevastyanova, O. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c05172 · Cited by 5
Weber, P., Arnesdotter, E., Attar, N., Friedrichs, S., Seitz, C., Chowdhury, R. R., Koch, K., Buerki‐Thurnherr, T., Brugger, B. A., Wick, P., et al. (2025) · Computational and Structural Biotechnology Journal · doi:10.1016/j.csbj.2025.11.032 · Cited by 6
“…ubiquitous use of this large and chemically diverse group of synthetic compounds is based on their heatproof, waterproof, and non-stick properties, that make them attractive in many industrial and consumer applications, including non-stick cooking utensils, cleaning products and furniture [30,31].”
Diverse origins and chemical complexity of nanoplastics
Yang, T., Liu, J., Nicell, J. A., Praetorius, A., Fang, M., & Wang, Z. (2026) · Nature Nanotechnology · doi:10.1038/s41565-026-02168-3 · Cited by 7
“Fluoropolymers, such as polytetrafluoroethylene and fluorinated ethylene propylene, are widely used as processing aids in plastic manufacturing, often in the form of micropowders or coatings 24,25 .”
Extensional Rheology of Poly(vinylidene fluoride)/N,N-dimethylformamide Solutions
Xu, L., Ju, M., Guo, W., & Yu, S. (2023) · Polymers · doi:10.3390/polym15051119 · Cited by 5
“More applications are made to electrical equipment and electronic devices by means of good electrical insulation of PVDF [5,6].”
Zhang, D., Zhou, S., & Li, M. (2023) · Polymers · doi:10.3390/polym15102286 · Cited by 5
Sheng, Y., Ji, C., Yin, P., Zhang, J., Huo, L., Zhang, B., Du, L., & Yang, S. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c00361 · Cited by 5
Plastics in High Heat Resistant Applications
Rusli, A., Othman, M. B. H., & Marsilla, K. I. K. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00073-0 · Cited by 5
Mizuishi, T., Rahman, S., Mitsuboshi, K., Ni, S., Yoshioka, S., Imaizumi, M., Sawai, H., Wong, K. H., Mashio, A. S., & Hasegawa, H. (2024) · Chemosphere · doi:10.1016/j.chemosphere.2024.143431 · Cited by 4
Maibom, K. A. M., Breitenstein, C., Lorenzen, S., Knuplez, T., Schneider, L. N., Bejaoui, Y. K. J., Gierling, J., Radacki, K., Braunschweig, H., Deutsch, C., et al. (2025) · Chemistry - A European Journal · doi:10.1002/chem.202501550 · Cited by 4
Sustainable Fluorinated Silicon Dielectric Design for Enhanced Contact‐Electro‐Chemistry
Gan, T., Li, Z., Li, S., Liu, H., Amaratunga, G. A. J., Wang, Z. L., & Wei, D. (2025) · Angewandte Chemie · doi:10.1002/ange.202517059 · Cited by 5
Electronic structure basis of strength and toughness in fluoropolymers
Xu, J., Hao, T., & Hossain, Z. M. (2020) · Journal of Applied Physics · doi:10.1063/5.0027025 · Cited by 4
Yang, M., Xu, R., Guo, S., & Shen, J. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.883184 · Cited by 4
“…resistance, low dielectric constant and loss (Scott et al., 1962; Hara, 1967; Longhenry et al., 1997; Hosseini et al., 2012), low water vapor permeability (Yavari et al., 2018), high transparency (Gardiner, 2014; Hosseini et al., 2016; Khameneh-asl et al., 2016; Walther et al., 2020), etc.”
BackgroundPersistent Organic Pollutants- A Silent Threat to the Agro-ecosystem and Surrounding Environment
Rani, N., Duhan, A., Kumar, P., & Kumar, R. (2022) · International Journal of Plant & Soil Science · doi:10.9734/ijpss/2022/v34i242695 · Cited by 4
Fluoropolymer nanocomposite membranes for gas separation applications
Jayan, J. S., Vindhyasurumi, A., Lekshmi, A. G., & Saritha, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95335-1.00016-5 · Cited by 4
Ahmed, T., Bafna, J. A., Hemmler, R., Gall, K., Wagner, R., Winterhalter, M., Vellekoop, M. J., & van den Driesche, S. (2022) · Membranes · doi:10.3390/membranes12030309 · Cited by 4
“Since CYTOP is an amorphous fluoropolymer like Teflon [43], it can be assumed that pre-treatment steps with organic solvent may improve its lipophilic property.”
BackgroundTubular Hygromechanical Polymeric Brake for Soft and Compact Wearable Robots
Lee, K.-S., Pyo, J., Kim, T., & Park, H. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00413 · Cited by 4
Fluorinated Polymers: Synthesis and Applications
Schwarz, R., & Diesendruck, C. E. (2022) · Patai's chemistry of functional groups · doi:10.1002/9780470682531.pat1008 · Cited by 4
Zhu, W., Liang, Q., Gu, W., Wang, H., Xu, Y., & Li, Y. (2026) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2025.12.007 · Cited by 3
Prediction of permeation-related hydrogen losses in pipelines based on machine learning
López, C., Pacheco-Álvarez, S., & Jaques, A. V. (2025) · Energy Reports · doi:10.1016/j.egyr.2025.04.048 · Cited by 5
Xiong, X., Venkataraman, M., Yang, T., Militký, J., & Wiener, J. (2021) · Polymers · doi:10.3390/polym14010048 · Cited by 3
Endocrine-disrupting chemicals (EDCs) in environmental matrices and human bodily fluids
Basili, D., Biamis, C., Carnevali, O., & Hardiman, G. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-824464-7.00002-7 · Cited by 4
Barros, M. C. F., Ribeiro, A. C. F., & Santos, C. I. A. V. (2023) · Processes · doi:10.3390/pr11072088 · Cited by 3
Preparation, Modification, and Application of Ethylene-Chlorotrifluoroethylene Copolymer Membranes
Liao, Z., Wang, Q., Zhou, Q., Cui, Z., Wang, Z., & Drioli, E. (2024) · Membranes · doi:10.3390/membranes14020042 · Cited by 3
“It is commonly used as a protective coating, including for pipeline protection and corrosion prevention [10,11].”
BackgroundIlly, N., Urayeneza, D., Maryasevskaya, A. V., Michely, L., Boileau, S., Brissault, B., Bersenev, E. A., Anokhin, D. V., Ivanov, D. A., & Penelle, J. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01559 · Cited by 3
“For instance, the chemical resistance of their C-F bonds, both to thermal and oxidative degradations, extends considerably the range of temperatures commercial polymers can be used routinely under aerobic atmospheres, polytetrafluoroethylene (PTFE, Teflon®) being the prototypical commercial example since 1946.(1) In a…”
BackgroundЮрьевич, Б. Н., Ronshin, F., Safonov, A. I., Starinskiy, S. V., & Sulyaeva, V. S. (2021) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/abe8fd · Cited by 3
Padgurskas, J., Rukuiža, R., & Žunda, A. (2022) · Coatings · doi:10.3390/coatings12040463 · Cited by 3
Piezoelectricity and electrochemical effect of PVDF thermoplastic-based composites
Farooq, S., & Ranjan, N. (2023) · Advances in Materials and Processing Technologies · doi:10.1080/2374068x.2023.2259142 · Cited by 2
“Fluoropolymers allow for the management of a variety of factors that can either directly or indirectly alter the electrical output of the resulting PEGs [23].”
CHEHAT, N. E. H., Doulache, N., & Sali, S. (2025) · Physica Scripta · doi:10.1088/1402-4896/adb07e · Cited by 2
Electrophotocatalysis for Reductive Defluorination of PTFE and PFASs
Fu, J.-L., Liu, Y., Chen, Y.-M., Zhang, H., Qu, J., & Kang, Y. (2025) · Angewandte Chemie · doi:10.1002/ange.202422043 · Cited by 3
Towards a greener kitchen: Can sol-gel ceramic non-stick coatings replace polytetrafluoroethylene?
Guerrero‐Vaca, G., Carrillo-Estepa, A., & Rodríguez‐Alabanda, Ó. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.105074 · Cited by 2
Fluoropolymers after PFAS : Mechanical and rheological comparisons of PVDF ‐ CTFE polymers
Lundberg, E. F., Wilcox, D. R., Shepherd, R., Brown, G. W., & McCollum, J. M. (2025) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.22227 · Cited by 2
“12 Here, we examine changes in mechanical and rheological response across synthetic routes.”
Cobalt‐Catalyzed Silyldifluoromethylamination of Styrenes with TMSCF2H and Nitrogen Nucleophiles†
Zhu, F., Wang, N., & Wu, X. (2025) · Chinese Journal of Chemistry · doi:10.1002/cjoc.70099 · Cited by 2
Automotive fluoroelastomers and butanol‐gasoline blends ‐ a material compatibility study
Nair, P., & Meenakshi, H. N. (2025) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.1742 · Cited by 2
Joshi, V., Nandini, D., & Purwar, R. (2025) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2025.110462 · Cited by 5
Lim, J., Totée, C., Gimello, O., Devisme, S., Eid, N., Bonnet, A., & Ameduri, B. M. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01566 · Cited by 2
The anomalous nature of fluorine revisited: amazing consequences
Murray, J. S. (2025) · Physical Chemistry Chemical Physics · doi:10.1039/d5cp03714j · Cited by 2
Ke, C., Suzuki, R., Gao, T., Li, F., Yamamoto, T., Isono, T., Liou, G., & Satoh, T. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c02588 · Cited by 4
Corviseri, M. C., Polidoro, A. D. S., Stevanin, C., Pasti, L., & Franchina, F. A. (2025) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-025-06266-4 · Cited by 5
“…overlap between Published in the topical collection Food and Environment: Advances in Separation and Sensing Methodologies with guest editors Chiara E. Cordero, Emanuela Gionfriddo, and Giorgia Purcaro. the corresponding orbitals of carbon and fluorine, leading to a “self-stabilization” [3, 5].”
Polyvinylidene Fluoride: A Growing Specialty Polymer with Many Facets
Ameduri, B. M. (2026) · Chinese Journal of Chemistry · doi:10.1002/cjoc.70530 · Cited by 4
Bioaccumulation and effects of per- and polyfluoroalkyl substances in bivalves: A review
Donaldson, J., Paneque, F., & Bisesi, J. H. (2026) · Environmental Toxicology and Chemistry · doi:10.1093/etojnl/vgag096 · Cited by 2
Science of Sealing: Advanced Materials for High-Temperature Applications
Reger, T. S., & Reichl, G. (2020) · ASMC proceedings · doi:10.1109/asmc49169.2020.9185380 · Cited by 2
“Further, the carbon-carbon bonds that comprise the polymer backbone are stronger in a perfluorinated polymer compared to an equivalent hydrocarbon [8].”
BackgroundThe structure and properties of porous poly(tetrafluoroethylene)
Kaliuzhnyi, O., & Platkov, V. Y. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-02887-w · Cited by 2
“Among the presently available porous polymers, porous poly(tetrafluoroethylene) (PTFE)—based materials have been attracting an ever growing interest, which is due to their unique physical and chemical properties [5, 6].”
BackgroundAparna, A., Harikumar, S., Lekshmi, A. G., Sethulekshmi, A. S., Venu, G., & Saritha, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95335-1.00009-8 · Cited by 2
ADDITIVE MANUFACTURING OF FLUOROELASTOMER LATEX: A DIRECT-INK-WRITING APPROACH
Kamath, S. S., & Choi, J. (2024) · Rubber Chemistry and Technology · doi:10.5254/rct.24.00002 · Cited by 2
Amphiphilic block copolymers of poly(vinylidene fluoride) and poly(ethylene glycol)
Alamoudi, A. A., Nikam, S. B., Bhaumik, S., & Hadjichristidis, N. (2024) · Polymers for Advanced Technologies · doi:10.1002/pat.6452 · Cited by 2
Ok, S., Steinhart, M., & Ameduri, B. M. (2024) · Macromolecular Rapid Communications · doi:10.1002/marc.202400412 · Cited by 2
Liu, S., Shi, L., Liu, G., Xiao, W., & Zhu, H. (2024) · Processes · doi:10.3390/pr13010004 · Cited by 2
Deciphering the Meticulous Role of Safer Auxiliaries and Solvents: A Perspective
Sharma, A. K., Sharma, R., & Singh, A. (2025) · Journal of Biochemical and Molecular Toxicology · doi:10.1002/jbt.70411 · Cited by 2
“A major application of fluorous chemistry involves the use of fluorosurfactant perfluorooctanoic acid (PFOA) to facilitate the production of Teflon [114].”
Hunter, L. (2015) · Australian Journal of Chemistry · doi:10.1071/ch14583 · Cited by 2
Ghasem, N. M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95335-1.00014-1 · Cited by 2
Fluoropolymers for Automotive and Aerospace Industries
Bouharras, F. E., Raihane, M., Lopez, G., & Ameduri, B. M. (2022) · Wiley eBooks · doi:10.1002/9783527815562.mme0053 · Cited by 7
Metadata
- Authors
- Gardiner, J.
- Affiliations
- Commonwealth Scientific and Industrial Research Organisation (AU)
- Corresponding author
- Gardiner, James
- ORCID
- Gardiner, James
- Venue
- Australian Journal of Chemistry
- Publisher
- CSIRO Publishing
- Published
- 2014-08-12
- Volume
- 68
- Issue
- 1
- Pages
- 13-22
- ISSN
- 0004-9425 (ISSN-L)
- 1445-0038
- OpenAlex
- W2105734453
- Cited by
- 264
- References
- 36
- Citations by year
- 2026: 32 · 2025: 45 · 2024: 24 · 2023: 33 · 2022: 28 · 2021: 20 · 2020: 29 · 2019: 24 · 2018: 11 · 2017: 8 · 2016: 7 · 2015: 3
- FWCI
- 4.19
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Australian Journal of Chemistry (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Synthesis and properties of polymers
- Physical Sciences › Environmental Science › Environmental Chemistry › Per- and polyfluoroalkyl substances research
- Physical Sciences › Chemistry › Organic Chemistry › Fluorine in Organic Chemistry
- Keywords
- fluorinated polymers, polytetrafluoroethylene, polychlorotrifluoroethylene, FEP, ETFE, PFA, polyvinylidene fluoride, Nafion, FEVE, Teflon AF, CYTOP, fluoroelastomer, perfluoropolyether, fluorosurfactants
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.