CoChat

Retention capacity of biochar-amended New Zealand dairy farm soil for an estrogenic steroid hormone and its primary metabolite

Sarmah, Ajit K., Srinivasan, Prakash, Smernik, Ronald J., Manley-Harris, Merilyn, Antal, Michael Jerry, Downie, Adriana, van Zwieten, Lukas · 2010 · Soil Research
Cited by 73

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Abstract

We examined the retention ability of a New Zealand dairy farm soil amended with 3 types of biochar produced from a variety of feedstocks for a steroid hormone (oestradiol, E2) and its primary transformation product (estrone, E1). Biochars produced from corn cob (CC), pine sawdust (PSD) and green waste (GW) were characterised by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and solid-state 13C nuclear magnetic resonance spectroscopy. Batch sorption studies were performed on soil amended with each biochar (0.5% and 1% by weight) using a complex solvent extraction scheme, and isotherms were fitted to the Freundlich model. All isotherms were highly non-linear, with N values in the range 0.46–0.83 (E2) and 0.66–0.88 (E1) in soil amended with different percentages of biochars. Overall, addition of all 3 biochars was found to increase the soil sorption affinity for the hormones, with E2 sorption being the highest in the soil amended with 1% PSD biochar. There was no marked difference in hormone sorption ability in the other 2 treatments (soil treated with 1% CC biochar and 1% GW biochar). Overall, the effective distribution coefficient (Kdeff) values for E2 at the lowest equilibrium concentration (Cw 0.5 mg/L) ranged from 35 to 311 L/kg in soil amended with the 3 types of biochar. Addition of 0.5% of PSD biochar resulted in ~560% increase in the Kdeff value for E2, while at 1% addition of PSD biochar, uptake of E2 was nearly 1400% higher than the control. For E1, the percentage increase in Kdeff was comparatively smaller than E2; however, it still ranged from 40 to 280%, and 60 to >320% at addition of 0.5% and 1% PSD biochar, respectively, compared with the control soil. Highest treatment temperature and associated greater surface area, low ash content, higher carbon content, and the abundance of polar functional groups (e.g. –OH, C=O) may explain why the soil amended with PSD biochar exhibited high sorptive capacity for the hormones.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1071/sr10013

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 4 references

Cited by

Metadata

Authors
Sarmah, A. K., Srinivasan, P., Smernik, R. J., Manley-Harris, M., Antal, M. J., Downie, A., & van Zwieten, L.
Venue
Soil Research
Published
2010-09-28
Volume
48
Issue
7
Pages
648-658
ISSN
  • 0004-9573 (ISSN-L)
  • 1838-675X
  • 1838-6768
OpenAlex
W2057714997
Cited by
73
References
4
FWCI
3.18
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.