The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Enhanced strength and temperature dependence of mechanical properties of Li at small scales and its implications for Li metal anodes
Open accessAbstract
Significance: Li metal anodes play a crucial part in next-generation Li ion and “beyond-Li ion” batteries. The issue of dendrites remains a major hurdle, and mechanical suppression through the use of solid electrolytes proves to be a promising solution. However, a lack of knowledge of mechanical properties of lithium metal at the micrometer scale limits our understanding of the mechanical interactions at the electrolyte/electrode interface. In this work, we report results on the mechanical properties of Li, specifically that Li exhibits a strong size effect at room and elevated temperature. First-principle calculations show a high level of elastic anisotropy. Based on the results, we present rational guidelines for anode/electrolyte selection and operating condition that will lead to better cycling performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Finite Elastic Strain of Cubic Crystals
Birch, F. (1947) · Physical Review · doi:10.1103/physrev.71.809 · Cited by 6,571
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Single Crystal Elastic Constants and Calculated Aggregate Properties. A Handbook
Simmons, G., & Wang, H. F. (1971) · Medical Entomology and Zoology · Cited by 2,644
Real-space grid implementation of the projector augmented wave method
Mortensen, J. J., Hansen, L. B., & Jacobsen, K. W. (2005) · Physical Review B · doi:10.1103/physrevb.71.035109 · Cited by 2,072
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Greer, J. R., & De Hosson, J. T. M. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.01.005 · Cited by 1,763
Self-citationThe Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Bower, A. F. (2009) · CRC Press eBooks · doi:10.1201/9781439802489 · Cited by 1,536
Greer, J. R., Oliver, W. C., & Nix, W. D. (2005) · Acta Materialia · doi:10.1016/j.actamat.2004.12.031 · Cited by 1,501
Self-citationAn object-oriented scripting interface to a legacy electronic structure code
Bahn, S. R., & Jacobsen, K. W. (2002) · Computing in Science & Engineering · doi:10.1109/5992.998641 · Cited by 1,359
A Critical Review of Li/Air Batteries
Christensen, J., Albertus, P., Sanchez-Carrera, R. S., Lohmann, T., Kozinsky, B., Liedtke, R., Ahmed, J., & Kojic, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.086202jes · Cited by 1,041
Nanoscale gold pillars strengthened through dislocation starvation
Greer, J. R., & Nix, W. D. (2006) · Physical Review B · doi:10.1103/physrevb.73.245410 · Cited by 925
Self-citationKhurana, R., Schaefer, J. L., Archer, L. A., & Coates, G. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502133j · Cited by 880
PHON: A program to calculate phonons using the small displacement method
Alfè, D. (2009) · Computer Physics Communications · doi:10.1016/j.cpc.2009.03.010 · Cited by 834
Lithium metal stripping/plating mechanisms studies: A metallurgical approach
Gireaud, L., Grugeon, S., Laruelle, S., Yrieix, B., & Tarascon, J.-M. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.07.037 · Cited by 436
Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale
Kim, J.-Y., Jang, D., & Greer, J. R. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.12.022 · Cited by 364
Self-citationCorrelation between Critical Temperature and Strength of Small-Scale bcc Pillars
Schneider, A. S., Kaufmann, D., Clark, B. G., Frick, C. P., Gruber, P. A., Mönig, R., Kraft, O., & Arzt, E. (2009) · Physical Review Letters · doi:10.1103/physrevlett.103.105501 · Cited by 258
Surface-controlled dislocation multiplication in metal micropillars
Weinberger, C. R., & Wei Cai, A. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0806118105 · Cited by 242
Influence of Electrolyte on Lithium Cycling Efficiency with Pressurized Electrode Stack
Hirai, T., Yoshimatsu, I., & Yamaki, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054778 · Cited by 127
Mechanical Deformation of a Lithium-Metal Anode Due to a Very Stiff Separator
Ferrese, A., & Newman, J. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0911409jes · Cited by 117
First-principles calculations of the thermal expansion of metals
Quong, A. A., & Liu, A. W. K. (1997) · Physical review. B, Condensed matter · doi:10.1103/physrevb.56.7767 · Cited by 105
Effects of physical constraints on Li cyclability
Wilkinson, D. P., Blom, H. P., Brandt, K., & Wainwright, D. (1991) · Journal of Power Sources · doi:10.1016/0378-7753(91)80077-b · Cited by 98
Lithium fiber growth on the anode in a nanowire lithium ion battery during charging
Liu, X. H., Zhong, L. S., Zhang, L., Kushima, A., Mao, S. X., Li, J., Ye, Z. Z., Sullivan, J. P., & Huang, J. Y. (2011) · Applied Physics Letters · doi:10.1063/1.3585655 · Cited by 90
Finite-temperature elasticity of fcc Al: Atomistic simulations and ultrasonic measurements
Pham, H. H., Williams, M. E., Mahaffey, P., Radović, M., Arróyave, R., & Çağın, T. (2011) · Physical Review B · doi:10.1103/physrevb.84.064101 · Cited by 54
Cited by
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Characterization and performance evaluation of lithium-ion battery separators
Lagadec, M. F., Zahn, R., & Wood, V. (2018) · Nature Energy · doi:10.1038/s41560-018-0295-9 · Cited by 812
Review—Practical Challenges Hindering the Development of Solid State Li Ion Batteries
Kerman, K., Luntz, A., Viswanathan, V., Chiang, Y.-M., & Chen, Z. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1571707jes · Cited by 712
Self-citationSolid electrolyte interphases in lithium metal batteries
Jagger, B., & Pasta, M. (2023) · Joule · doi:10.1016/j.joule.2023.08.007 · Cited by 592
Metadata
- Authors
- Xu, C., Ahmad, Z., Aryanfar, A., Viswanathan, V., & Greer, J. R.
- Venue
- Proceedings of the National Academy of Sciences
- Published
- 2016-12-19
- Volume
- 114
- Issue
- 1
- Pages
- 57-61
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- OpenAlex
- W2467690158
- Cited by
- 302
- References
- 26
- FWCI
- 7.32
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.