The DOI matches its Crossref record.
Optimal part deposition orientation in FDM by using a multicriteria genetic algorithm
Abstract
In rapid prototyping processes, the deposition orientation of the part is very important as it affects part surface quality, production time and the requirement for support structure and hence cost. Depositing the part with thinner slices results in a larger build time. At the same time, if a large slice thickness is chosen, the surface finish is very poor due to stair-stepping. These are two contradicting issues and are tackled by using adaptive slicing. In adaptive slicing, slice thickness is calculated based on local geometry of the computer-aided design model and rapid proto-typing machine specifications. Even though adaptive slicing controls part surface quality by compromising on build time for a deposition orientation, an optimum orientation can further reduce build time and enhance part surface quality. In the present work, an attempt has been made to determine the optimal part deposition orientations by considering two objective functions at a time, namely average part surface roughness (average part surface quality) and build time. The two objectives are minimized simultaneously using a multicriteria genetic algorithm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Support Structures for Additive Manufacturing: A Review
Jiang, J., Xu, X., & Stringer, J. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2040064 · Cited by 527
Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
Peng, T., Kellens, K., Tang, R., Chen, C., & Chen, G. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.022 · Cited by 426
From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
Meng, L., Zhang, W., Quan, D., Shi, G., Tang, L., Hou, Y., Breitkopf, P., Zhu, J., & Gao, T. (2020) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-019-09331-1 · Cited by 402
Support structure constrained topology optimization for additive manufacturing
Mirzendehdel, A. M., & Suresh, K. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.08.006 · Cited by 318
Design for sustainable additive manufacturing: A review
Hegab, H., Khanna, N., Monib, N., & Salem, A. (2023) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2023.e00576 · Cited by 289
Metadata
- Authors
- Pandey, P. M., Thrimurthulu, K., & Reddy *, N. V.
- Venue
- International Journal of Production Research
- Publisher
- Informa UK Limited
- Published
- 2004-10
- Volume
- 42
- Issue
- 19
- Pages
- 4069-4089
- ISSN
- 0020-7543 (ISSN-L)
- 1366-588X
- OpenAlex
- W2025762535
- Cited by
- 186
- References
- 0
- FWCI
- 7.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimal part deposition orientation in FDM by using a multicriteria genetic algorithm. https://app.cochat.ai/papers/10.1080/00207540410001708470
- The paper
- Pandey, P. M., Thrimurthulu, K., & Reddy *, N. V. (2004). Optimal part deposition orientation in FDM by using a multicriteria genetic algorithm. International Journal of Production Research. https://doi.org/10.1080/00207540410001708470
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.