Design for sustainable additive manufacturing: A review

Metal Additive Manufacturing: A Review

Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984 · see citing works

Product design and business model strategies for a circular economy

Bocken, N. M. P., de Pauw, I., Bakker, C., & van der Grinten, B. (2016) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2016.1172124 · Cited by 4,002 · see citing works

Additive manufacturing and sustainability: an exploratory study of the advantages and challenges

Ford, S. J., & Despeisse, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.150 · Cited by 1,933 · see citing works

Additive manufacturing and its societal impact: a literature review

Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,865 · see citing works

Life Cycle Assessment: Past, Present, and Future

Guinée, J. B., Heijungs, R., Huppes, G., Zamagni, A., Masoni, P., Buonamici, R., Ekvall, T., & Rydberg, T. (2010) · Environmental Science & Technology · doi:10.1021/es101316v · Cited by 1,707 · see citing works

Business model design and the performance of entrepreneurial firms

Zott, C., & Amit, R. (2007) · Organization Science · doi:10.1287/orsc.1060.0232 · Cited by 1,707 · see citing works

Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations

Huang, Y. H., Leu, M. C., Mazumder, J., & Donmez, A. M. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028725 · Cited by 956 · see citing works

A global sustainability perspective on 3D printing technologies

Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950 · see citing works

Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components

Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805 · see citing works

International Encyclopedia of Human Geography (2009)

(2010) · Choice Reviews Online · doi:10.5860/choice.48-0052 · Cited by 696 · see citing works

Additive layered manufacturing: sectors of industrial application shown through case studies

Petrovic-Filipovic, V., Gonzalez, J. V. H., Ferrando, O. J., Gordillo, J. D., Blasco, J. R., & Portolés, L. (2010) · International Journal of Production Research · doi:10.1080/00207540903479786 · Cited by 676 · see citing works

Economics of additive manufacturing for end-usable metal parts

Atzeni, E., & Salmi, A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3878-1 · Cited by 635 · see citing works

Direct digital manufacturing: definition, evolution, and sustainability implications

Chen, D., Heyer, S., Ibbotson, S., Salonitis, K., Steingrímsson, J. G., & Thiede, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.009 · Cited by 498 · see citing works

Ultrafine particle emissions from desktop 3D printers

Stephens, B., Azimi, P., Orch, Z. E., & Ramos, T. (2013) · Atmospheric Environment · doi:10.1016/j.atmosenv.2013.06.050 · Cited by 489 · see citing works

Sustainability Science and Engineering: The Emergence of a New Metadiscipline

Mihelcic, J. R., Crittenden, J. C., Small, M. J., Shonnard, D. R., Hokanson, D. R., Zhang, Q., Chen, H., Sorby, S., James, V. U., Sutherland, J. W., et al. (2003) · Environmental Science & Technology · doi:10.1021/es034605h · Cited by 473 · see citing works

Sustainability of additive manufacturing: An overview on its energy demand and environmental impact

Peng, T., Kellens, K., Tang, R., Chen, C., & Chen, G. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.022 · Cited by 443 · see citing works

Solid Freeform Fabrication: A New Direction in Manufacturing

Beaman, J. J., Barlow, J. W., Bourell, D. L., Crawford, R., Marcus, H. L., & McAlea, K. P. (1997) · Springer eBooks · doi:10.1007/978-1-4615-6327-3 · Cited by 438 · see citing works

Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment

Faludi, J., Bayley, C., Bhogal, S., & Iribarne, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2013-0067 · Cited by 432 · see citing works

Experimental study aiming to enhance the surface finish of fused deposition modeled parts

Galantucci, L. M., Lavecchia, F., & Percoco, G. (2009) · CIRP Annals · doi:10.1016/j.cirp.2009.03.071 · Cited by 404 · see citing works

Improvement of surface finish by staircase machining in fused deposition modeling

Pandey, P. M., Reddy, N. V., & Dhande, S. G. (2002) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(02)00953-6 · Cited by 396 · see citing works

Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments

Azimi, P., Zhao, D., Pouzet, C., Crain, N., & Stephens, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b04983 · Cited by 388 · see citing works

Simultaneous Experimentation as a Learning Strategy: Business Model Development Under Uncertainty

Andries, P., Debackere, K., & Looy, B. V. (2013) · Strategic Entrepreneurship Journal · doi:10.1002/sej.1170 · Cited by 381 · see citing works

Environmental aspects of laser-based and conventional tool and die manufacturing

Morrow, W. R., Qi, H., Kim, I., Mazumder, J., & Skerlos, S. J. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2005.11.030 · Cited by 380 · see citing works

The Upcycle: Beyond Sustainability – Designing for Abundance

(2013) · International Journal of Sustainability in Higher Education · doi:10.1108/ijshe.2013.24914daa.010 · Cited by 333 · see citing works

Why manufacturers adopt additive manufacturing technologies: The role of sustainability

Niaki, M. K., Torabi, S. A., & Nonino, F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.019 · Cited by 303 · see citing works

Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon

Wojtyła, S., Klama, P., & Baran, T. (2017) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459624.2017.1285489 · Cited by 291 · see citing works

Sustainability Characterization for Additive Manufacturing

Mani, M., Lyons, K. W., & Gupta, S. K. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.016 · Cited by 253 · see citing works

Recycling of polyamide 12 based powders in the laser sintering process

Dotchev, K., & Yusoff, W. A. Y. W. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960299 · Cited by 232 · see citing works

Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing

Zhong, S., & Pearce, J. M. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.023 · Cited by 232 · see citing works

A methodological framework for the inclusion of modern additive manufacturing into the production portfolio of a focused factory

Achillas, C., Aidonis, D., Iakovou, E. T., Thymianidis, M., & Tzetzis, D. (2014) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2014.07.014 · Cited by 229 · see citing works

The impact of additive manufacturing on supply chains

Durach, C. F., Kurpjuweit, S., & Wagner, S. M. (2017) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/ijpdlm-11-2016-0332 · Cited by 221 · see citing works

Quantitative analysis of a chemical treatment to reduce roughness of parts fabricated using fused deposition modeling

Galantucci, L. M., Lavecchia, F., & Percoco, G. (2010) · CIRP Annals · doi:10.1016/j.cirp.2010.03.074 · Cited by 211 · see citing works

Life cycle costing in LCM: ambitions, opportunities, and limitations

Rebitzer, G., & Hunkeler, D. J. (2003) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978913 · Cited by 201 · see citing works

Optimal part deposition orientation in FDM by using a multicriteria genetic algorithm

Pandey, P. M., Thrimurthulu, K., & Reddy, N. V. (2004) · International Journal of Production Research · doi:10.1080/00207540410001708470 · Cited by 187 · see citing works

Framework for Life Cycle Sustainability Assessment of Additive Manufacturing

Ribeiro, I., Matos, F., Jacinto, C., Salman, H. M., Cardeal, G., Carvalho, H., Godina, R., & Peças, P. (2020) · Sustainability · doi:10.3390/su12030929 · Cited by 169 · see citing works

Sustainability issues in laser-based additive manufacturing

Sreenivasan, R., Goel, A., & Bourell, D. L. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.124 · Cited by 160 · see citing works

Emission of particulate matter from a desktop three-dimensional (3D) printer

Yi, J., LeBouf, R. F., Duling, M. G., Nurkiewicz, T. R., Chen, B. T., Schwegler‐Berry, D., Virji, M. A., & Stefaniak, A. B. (2016) · Journal of Toxicology and Environmental Health · doi:10.1080/15287394.2016.1166467 · Cited by 160 · see citing works

Eco-friendly additive manufacturing of metals: Energy efficiency and life cycle analysis

Gao, C., Wolff, S. J., & Wang, S. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.06.011 · Cited by 156 · see citing works

Cost estimation for rapid manufacturing ’ simultaneous production of mixed components using laser sintering

Ruffo, M., & Hague, R. (2007) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem894 · Cited by 152 · see citing works

Characterization of Emissions from a Desktop 3D Printer

Mendes, L., Kangas, A., Kukko, K., Mølgaard, B., Säämänen, A. J., Kanerva, T., Ituarte, I. F., Huhtiniemi, M., Stockmann‐Juvala, H., Partanen, J. P., et al. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12569 · Cited by 148 · see citing works

The Role of Additive Manufacturing in Improving Resource Efficiency and Sustainability

Despeisse, M., & Ford, S. J. (2015) · IFIP advances in information and communication technology · doi:10.1007/978-3-319-22759-7_15 · Cited by 143 · see citing works

Environmental impacts of rapid prototyping: an overview of research to date

Drizo, A., & Pegna, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610652393 · Cited by 141 · see citing works

Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer

Stefaniak, A. B., LeBouf, R. F., Yi, J., Ham, J. E., Nurkewicz, T., Schwegler‐Berry, D., Chen, B. T., Wells, J. R., Duling, M. G., Lawrence, R. B., et al. (2017) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459624.2017.1302589 · Cited by 133 · see citing works

The impact of manufacturing parameters on submicron particle emissions from a desktop 3D printer in the perspective of emission reduction

Deng, Y., Cao, S., Chen, A., & Guo, Y. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.05.021 · Cited by 128 · see citing works

Circular Economy: Questions for Responsible Minerals, Additive Manufacturing and Recycling of Metals

Giurco, D., Littleboy, A. K., Boyle, T., Fyfe, J., & White, S. B. (2014) · Resources · doi:10.3390/resources3020432 · Cited by 128 · see citing works

Streamlining the additive manufacturing digital spectrum: A systems approach

Kim, D. B., Witherell, P., Lipman, R. R., & Feng, S. C. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.10.004 · Cited by 128 · see citing works

Roughness prediction in coupled operations of fused deposition modeling and barrel finishing

Boschetto, A., & Bottini, L. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.12.021 · Cited by 127 · see citing works

Design for manufacturing of surfaces to improve accuracy in Fused Deposition Modeling

Boschetto, A., & Bottini, L. (2015) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.07.005 · Cited by 127 · see citing works

Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer

Afshar‐Mohajer, N., Wu, C., Ladun, T., Rajon, D. A., & Huang, Y. H. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.07.013 · Cited by 124 · see citing works

Additive manufacturing methods: techniques, materials, and closed-loop control applications

Rivera, F. J. M., & Arciniegas, A. J. R. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05663-6 · Cited by 123 · see citing works

Anticipated environmental sustainability of personal fabrication

Kohtala, C., & Hyysalo, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.093 · Cited by 121 · see citing works

Environmental impact modeling of selective laser sintering processes

Kellens, K., Renaldi, R., Dewulf, W., Kruth, J., & Duflou, J. R. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0018 · Cited by 117 · see citing works

Sustainability outcomes through direct digital manufacturing-based operational practices: A design theory approach

Holmström, J., Liotta, G., & Chaudhuri, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.092 · Cited by 110 · see citing works

How Additive Manufacturing Enables more Sustainable End-user Maintenance, Repair and Overhaul (MRO) Strategies

Wits, W. W., García, J. R. R., & Becker, J. M. J. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.01.156 · Cited by 96 · see citing works

Economic sustainability of additive manufacturing

Niaki, M. K., Nonino, F., Palombi, G., & Torabi, S. A. (2018) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-05-2018-0131 · Cited by 95 · see citing works

Sustainable production indicators at factory level

Winroth, M., Almström, P., & Andersson, C. (2016) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-04-2016-0054 · Cited by 95 · see citing works

Particle emissions from fused deposition modeling 3D printers: Evaluation and meta-analysis

Byrley, P., George, B. J., Boyes, W. K., & Rogers, K. R. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.11.070 · Cited by 90 · see citing works

Evaluating Eco‐Efficiency of 3D Printing in the Aeronautic Industry

Mami, F., Revéret, J., Fallaha, S., & Margni, M. D. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12693 · Cited by 89 · see citing works

Inhalation exposure to three-dimensional printer emissions stimulates acute hypertension and microvascular dysfunction

Stefaniak, A. B., LeBouf, R. F., Duling, M. G., Yi, J., Abukabda, A. B., McBride, C., & Nurkiewicz, T. R. (2017) · Toxicology and Applied Pharmacology · doi:10.1016/j.taap.2017.09.016 · Cited by 85 · see citing works

Innovation lessons from 3-D printing

de Jong, J. P. J., & de Bruijn, E. (2014) · IEEE Engineering Management Review · doi:10.1109/emr.2014.6966948 · Cited by 82 · see citing works

A Real-Time Iterative Machine Learning Approach for Temperature Profile Prediction in Additive Manufacturing Processes

Paul, A., Mozaffar, M., Yang, Z., Liao, W., Choudhary, A., Cao, J., & Agrawal, A. (2019) · IEEE International Conference on Data Science and Advanced Analytics (DSAA) · doi:10.1109/dsaa.2019.00069 · Cited by 82 · see citing works

Transportation Energy Data Book: Edition 39

Davis, S. C., & Boundy, R. G. (2021) · doi:10.2172/1767864 · Cited by 82 · see citing works

Investigation of Ultrafine Particle Emissions of Desktop 3D Printers in the Clean Room

Zhou, Y. H., Kong, X.-R., Chen, A., & Cao, S. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.08.1099 · Cited by 79 · see citing works

Framework to Predict the Environmental Impact of Additive Manufacturing in the Life Cycle of a Commercial Vehicle

Burkhart, M., & Aurich, J. C. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.02.194 · Cited by 77 · see citing works

Local and recyclable materials for additive manufacturing: 3D printing with mussel shells

Sauerwein, M., & Doubrovski, E. L. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.02.028 · Cited by 74 · see citing works

Design for sustainability (DFS): new challenges in developing and implementing a curriculum for next generation design and manufacturing engineers

Jawahir, I. S., Rouch, K. E., Dillon, O. W., Holloway, L. A., & Hall, A. (2007) · International journal of engineering education · Cited by 67 · see citing works

Evaluation of emissions and exposures at workplaces using desktop 3-dimensional printers

Stefaniak, A. B., Johnson, A. R., du Preez, S., Hammond, D. R., Wells, J. R., Ham, J. E., LeBouf, R. F., Menchaca, K., Martin, S. B., Duling, M. G., et al. (2018) · ACS Chemical Health & Safety · doi:10.1016/j.jchas.2018.11.001 · Cited by 66 · see citing works

Extending the scope of Material Flow Cost Accounting – methodical refinements and use case

Schmidt, A., Götze, U., & Sygulla, R. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.10.039 · Cited by 64 · see citing works

An experimental investigations on effects of cooling/lubrication conditions in micro milling of additively manufactured Inconel 718

Danish, M., Aslantaş, K., Hasçelik, A., Rubaiee, S., Gupta, M. K., Yildirim, M. B., Ahmed, A., & Mahfouz, A. B. (2022) · Tribology International · doi:10.1016/j.triboint.2022.107620 · Cited by 63 · see citing works

Insights Into Emissions and Exposures From Use of Industrial-Scale Additive Manufacturing Machines

Stefaniak, A. B., Johnson, A. R., du Preez, S., Hammond, D. R., Wells, J. R., Ham, J. E., LeBouf, R. F., Martin, S. B., Duling, M. G., Bowers, L. N., et al. (2018) · Safety and Health at Work · doi:10.1016/j.shaw.2018.10.003 · Cited by 62 · see citing works

Life cycle costing for innovations in product chains

Krozer, Y. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.07.040 · Cited by 58 · see citing works

An augmented Lagrangian coordination method for optimal allocation of cloud manufacturing services

Zhang, G., Zhang, Y., Xu, X. W., & Zhong, R. Y. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.11.008 · Cited by 57 · see citing works

2019 IEEE International Conference on Data Science and Advanced Analytics (DSAA)

(2019) · doi:10.1109/dsaa46601.2019 · Cited by 55 · see citing works

Energy modelling for FDM 3D printing from a life cycle perspective

Peng, T., & Sun, W. (2017) · International Journal of Manufacturing Research · doi:10.1504/ijmr.2017.083651 · Cited by 54 · see citing works

An eco-design for additive manufacturing framework based on energy performance assessment

Yi, L., Glatt, M. F., Sridhar, P., de Payrebrune, K., Linke, B. S., Ravani, B., & Aurich, J. C. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101120 · Cited by 54 · see citing works

Additive manufacturing from the sustainability perspective: proposal for a self-assessment tool

Machado, C. G., Despeisse, M., Winroth, M., & da Silva, E. R. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.03.123 · Cited by 50 · see citing works

Does Material Choice Drive Sustainability Of 3D Printing?

Faludi, J., Hu, Z., Alrashed, S., Braunholz, C., Kaul, S., & Kassaye, L. (2015) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1098115 · Cited by 40 · see citing works

Skills and Education for Additive Manufacturing: A Review of Emerging Issues

Despeisse, M., & Minshall, T. (2017) · IFIP advances in information and communication technology · doi:10.1007/978-3-319-66923-6_34 · Cited by 38 · see citing works

Energy consumption and economic modelling of performance measures in machining of wire arc additively manufactured Inconel-625

Raval, P., Patel, D., Prajapati, R., Badheka, V., Gupta, M. K., & Khanna, N. (2022) · Sustainable materials and technologies · doi:10.1016/j.susmat.2022.e00434 · Cited by 33 · see citing works

Investigating students’ eco-misperceptions in applying eco-design methods

Spreafico, C., & Landi, D. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.130866 · Cited by 32 · see citing works

Benefits of resource strategy for sustainable materials research and development

Helbig, C., Kolotzek, C., Thorenz, A., Reller, A., Tuma, A., Schafnitzel, M., & Krohns, S. (2017) · Sustainable materials and technologies · doi:10.1016/j.susmat.2017.01.004 · Cited by 30 · see citing works

Comparative study by life cycle assessment of an air ejector and orifice plate for experimental measuring stand manufactured by conventional manufacturing and additive manufacturing

Výtisk, J., Honus, S., Kočí, V., Pagáč, M., Hajnyš, J., Vujanović, M., & Vrtek, M. (2022) · Sustainable materials and technologies · doi:10.1016/j.susmat.2022.e00431 · Cited by 27 · see citing works

Energy and Cost Assessment of 3D Printed Mobile Case Covers

Minetola, P., & Eyers, D. R. (2018) · Procedia CIRP · doi:10.1016/j.procir.2017.11.065 · Cited by 24 · see citing works

A case study on the part optimization using eco-design for additive manufacturing based on energy performance assessment

Yi, L., Ehmsen, S., Glatt, M. F., & Aurich, J. C. (2021) · Procedia CIRP · doi:10.1016/j.procir.2021.01.058 · Cited by 19 · see citing works

Feasibility Study on Plastic Laser Sintering without Powder Bed Preheating

Niino, T., Haraguchi, H., & Itagaki, Y. (2011) · doi:10.26153/tsw/15274 · Cited by 17 · see citing works

Proceedings of the 2000 IEEE International Symposium on Electronics and the Environment (Cat. No.00CH37082)

(2000) · IEEE International Symposium on Electronics and the Environment (ISEE) · doi:10.1109/isee.2000.857616 · Cited by 13 · see citing works

The Circular Economy: Additive Manufacturing and Impacts for Materials Processing

Fitzsimons, L., McNamara, G., Obeidi, M. A., & Brabazon, D. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.11660-1 · Cited by 13 · see citing works

Revolutionizing manufacturing: A comprehensive overview of additive manufacturing processes, materials, developments, and challenges

Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 359 · see citing works

Recent Inventions in Additive Manufacturing: Holistic Review

Fidan, I., Huseynov, O., Ali, M. A., Alkunte, S., Rajeshirke, M., Gupta, A., Hasanov, S., Tantawi, K. H., Yasa, E., Yılmaz, O., et al. (2023) · Inventions · doi:10.3390/inventions8040103 · Cited by 178 · see citing works

Achieving sustainability by additive manufacturing: a state-of-the-art review and perspectives

Su, J., Ng, W.-L., An, J., Yeong, W., Chee, K.-C., & Sing, S. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2438899 · Cited by 121 · see citing works

Digital economy to encourage sustainable consumption and reduce carbon emissions

Jiang, H., Elahi, E., Gao, M., Huang, Y., & Liu, X. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.140867 · Cited by 110 · see citing works

Effects of build orientation and inclined features on physical, microstructural and mechanical properties of powder bed fusion additively manufactured metallic parts

Aiza, I., Baldi, C., de la Vega, F. M., Sebastiani, S., Veronese, N. E., Yousefi, M., Mosallanejad, M. H., Maleki, E., Guagliano, M., Iuliano, L., et al. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101357 · Cited by 98 · see citing works

Recent Advances in Additive Manufacturing: A Review of Current Developments and Future Directions

Said, L. B., Ayadi, B., Alharbi, S., & Dammak, F. (2025) · Machines · doi:10.3390/machines13090813 · Cited by 94 · see citing works

Recent Progress in Remanufacturing Technologies using Metal Additive Manufacturing Processes and Surface Treatment

Kahhal, P., Jo, Y.-K., & Park, S. (2023) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-023-00551-2 · Cited by 85 · see citing works

EXPLORING INNOVATIVE MATERIAL INTEGRATION IN MODERN MANUFACTURING FOR ADVANCING U.S. COMPETITIVENESS IN SUSTAINABLE GLOBAL ECONOMY

Ninduwezuor-Ehiobu, N., Tula, O. A., Daraojimba, C., Ofonagoro, K. A., Ogunjobi, O. A., Gidiagba, J. O., Egbokhaebho, B. A., & Banso, A. A. (2023) · Engineering Science & Technology Journal · doi:10.51594/estj.v4i3.558 · Cited by 74 · see citing works

Optimization of Process Parameters of Fused Filament Fabrication of Polylactic Acid Composites Reinforced by Aluminum Using Taguchi Approach

Hasanzadeh, R., Mihankhah, P., Azdast, T., Aghaiee, S., & Park, C. B. (2023) · Metals · doi:10.3390/met13061013 · Cited by 62 · see citing works

Challenges and opportunities in engineering next-generation 3D microelectronic devices: improved performance and higher integration density

Singh, N., Srivastava, K., Kumar, A., Yadav, N., Yadav, A. K., Dubey, S., Singh, R., Gehlot, A., Verma, A. S., Gupta, N., et al. (2024) · Nanoscale Advances · doi:10.1039/d4na00578c · Cited by 61 · see citing works

Machine Learning in 3D and 4D Printing of Polymer Composites: A Review

Malashin, I. P., Masich, I. S., Тынченко, В. С., Gantimurov, A., Nelyub, V., Бородулин, А. С., Martysyuk, D., & Galinovsky, A. L. (2024) · Polymers · doi:10.3390/polym16223125 · Cited by 57 · see citing works

Data-driven review of additive manufacturing on supply chains: Regionalization, key research themes and future directions

Akbari, M. (2023) · Computers & Industrial Engineering · doi:10.1016/j.cie.2023.109600 · Cited by 52 · see citing works

Energy Efficiency in Additive Manufacturing: Condensed Review

Fidan, I., Naikwadi, V., Alkunte, S., Mishra, R., & Tantawi, K. H. (2024) · Technologies · doi:10.3390/technologies12020021 · Cited by 52 · see citing works

Metal multi-material additive manufacturing: Overcoming barriers to implementation

Clare, A. T., Woizeschke, P., Rankouhi, B., Pfefferkorn, F. E., Bartels, D., Schmidt, M., & Wits, W. W. (2025) · CIRP Annals · doi:10.1016/j.cirp.2025.05.004 · Cited by 49 · see citing works

Big data analytics, GHRM practices, and green digital learning paving the way towards green innovation and sustainable firm performance

Alshuaibi, M. S. I., Alhebri, A. A., Khan, S. N., & Sheikh, A. A. (2024) · Journal of Open Innovation Technology Market and Complexity · doi:10.1016/j.joitmc.2024.100396 · Cited by 47 · see citing works

On sustainable design and manufacturing for the footwear industry – Towards circular manufacturing

Ghimouz, C., Kenné, J., & Hof, L. A. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112224 · Cited by 45 · see citing works

Design optimisation for hybrid metal additive manufacturing for sustainable construction

Baqershahi, M. H., Ayas, C., & Ghafoori, E. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2023.117355 · Cited by 45 · see citing works

Quantitative sustainability assessment of metal additive manufacturing: A systematic review

Pusateri, V., Hauschild, M. Z., Kara, S., Goulas, C., & Olsen, S. I. (2024) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2023.12.005 · Cited by 46 · see citing works

Maximizing Energy Efficiency in Additive Manufacturing: A Review and Framework for Future Research

May, G., & Psarommatis, F. (2023) · Energies · doi:10.3390/en16104179 · Cited by 42 · see citing works

Sustainable choices of Gen Y and Gen Z: exploring green horizons

Ghouse, S. M., Shekhar, R., & Chaudhary, M. (2024) · Management & Sustainability An Arab Review · doi:10.1108/msar-04-2024-0018 · Cited by 41 · see citing works

Material extrusion of electrochemical energy storage devices for flexible and wearable electronic applications

Nath, S. S., Patil, I. G., & Sundriyal, P. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.110129 · Cited by 35 · see citing works

Exploring the Dual Potential of Artificial Intelligence-Generated Content in the Esthetic Reproduction and Sustainable Innovative Design of Ming-Style Furniture

Wang, Y., Xi, Y., Liu, X., & Gan, Y. (2024) · Sustainability · doi:10.3390/su16125173 · Cited by 35 · see citing works

In-depth study and optimization of process parameters to enhance tensile and compressive strengths of PETG in FDM technology

Kumaresan, R., Kadirgama, K., Samykano, M., Harun, W. S. W., Arunkumar, T., & Kanny, K. M. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.06.013 · Cited by 35 · see citing works

Energy management and industry 4.0: Analysis of the enabling effects of digitalization on the implementation of energy management practices

Cagno, E., Accordini, D., Thollander, P., Andrei, M., Hasan, A. S. M. M., Pessina, S., & Trianni, A. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.125877 · Cited by 33 · see citing works

Stimuli–Responsive Mechanoadaptive Elastomeric Composite Materials: Challenges, Opportunities, and New Approaches

Dolui, T., Natarajan, T. S., Aiswarya, S., Chanda, J., Ghosh, P., Mukhopadhyay, R., Wießner, S., Heinrich, G., Das, A., & Banerjee, S. S. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202300584 · Cited by 32 · see citing works

Sustainable Approaches for the Additive Manufacturing of Ceramic Materials

Villa, A., Gianchandani, P. K., & Baino, F. (2024) · Ceramics · doi:10.3390/ceramics7010019 · Cited by 32 · see citing works

A decision-support framework for evaluating AI-enabled ESG strategies in the context of sustainable manufacturing systems

Aljohani, A. (2025) · Scientific Reports · doi:10.1038/s41598-025-09569-9 · Cited by 30 · see citing works

Polymeric composites in extrusion‐based additive manufacturing: a systematic review

Rodrigues, A. D. S. L., Pires, A. C. B., Barbosa, P. A., & Silveira, Z. D. C. (2024) · Polymer Composites · doi:10.1002/pc.28269 · Cited by 28 · see citing works

Wear and electrochemical corrosion behaviors of Cu matrix WC-Co reinforced composite coating prepared by cold spray

Wang, J., Zhang, M., Dai, R., Shao, L., Tu, Z., Zhu, D., Xu, Z., Dai, S. L., & Liu, Z. (2024) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2024.131001 · Cited by 28 · see citing works

The Multifaceted Role of 3D Printed Conducting Polymers in Next-Generation Energy Devices: A Critical Perspective

Jain, N., & Waidi, Y. O. (2025) · JACS Au · doi:10.1021/jacsau.4c00796 · Cited by 28 · see citing works

Integrating life cycle engineering into design for additive manufacturing: A review

Favi, C., Murgese, L., Villazzi, N., Gallozzi, S., Mandolini, M., & Marconi, M. (2025) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2025.07.010 · Cited by 28 · see citing works

Comparative sustainability assessment of powder bed fusion and solid-state additive manufacturing processes: The case of direct metal laser sintering versus additive friction stir deposition

Ahmed, A. A., Nazzal, M. A., Darras, B. M., Eltaggaz, A., & Deiab, I. M. (2024) · Sustainable materials and technologies · doi:10.1016/j.susmat.2024.e00858 · Cited by 27 · see citing works

Towards sustainable manufacturing: A comprehensive analysis of circular economy key performance indicators in the manufacturing industry

Aljamal, D., Salem, A., Khanna, N., & Hegab, H. A. (2024) · Sustainable materials and technologies · doi:10.1016/j.susmat.2024.e00953 · Cited by 27 · see citing works

Challenges and Future Perspectives for Additively Manufactured Polylactic Acid Using Fused Filament Fabrication in Dentistry

Kharmanda, G. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14070334 · Cited by 27 · see citing works

Comparing lignin and spent coffee grounds as bio‐fillers in PLA 3D ‐printable filaments

Lage‐Rivera, S., Ares‐Pernas, A., Dopico, S., Covas, J. A., & Abad, M. J. (2024) · Polymer Composites · doi:10.1002/pc.28782 · Cited by 26 · see citing works

On the use of 3D printing to enhance the thermal performance of building envelope – A review

de Rubeis, T., Ciccozzi, A., Giusti, L., & Ambrosini, D. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.110284 · Cited by 30 · see citing works

Unveiling additively manufactured cellular structures in hip implants: a comprehensive review

Dias, J. M. C. D. S., Silva, F. S., Gasik, M. I., Miranda, G., & Bartolomeu, F. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-12769-0 · Cited by 25 · see citing works

Sustainable Powder-Based Additive Manufacturing Technology

Sabzi, H. E., & Rivera-Díaz-del-Castillo, P. E. J. (2023) · Sustainability · doi:10.3390/su152015081 · Cited by 23 · see citing works

Post-processing of Inconel 718 superalloy by Laser-based Powder Bed Fusion: Microstructures and properties evaluation

Naskar, S., Simhambhatla, S., & Panigrahi, B. B. (2024) · Materials Science and Engineering A · doi:10.1016/j.msea.2024.147601 · Cited by 23 · see citing works

Modeling of Energy Consumption and Print Time for FDM 3D Printing Using Multilayer Perceptron Network

idrissi, M. A. E. Y. E., Laaouina, L., Jeghal, A., Tairi, H., & Zaki, M. (2023) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp7040128 · Cited by 23 · see citing works

A critical review of 3D printed orthoses towards workflow implementation in the clinical practice

Alrasheedi, N. H., Tlija, M., Elloumi, N., & Louhichi, B. (2024) · Journal of Engineering Research · doi:10.1016/j.jer.2024.01.024 · Cited by 22 · see citing works

Investigating the Properties and Characterization of a Hybrid 3D Printed Antimicrobial Composite Material Using FFF Process: Innovative and Swift

Ahmed, W. K., Al-Marzouqi, A. H., Nazir, M. H., Rizvi, T. A., Zaneldin, E. K., Khan, M., & Aziz, M. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24108895 · Cited by 22 · see citing works

Cutting fluids in metal AM: A review of sustainability and efficiency

Alimuzzaman, S. M., Jahan, M. P., Rakurty, C. S., Rangasamy, N., & Ma, J. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.09.075 · Cited by 22 · see citing works

Fabrication and characterization of Nickel-coated 3D printed electrodes for enhanced oxygen evolution reaction in acidic media at various temperatures

Hüner, B., Demïr, N., & Kaya, M. F. (2024) · Fuel · doi:10.1016/j.fuel.2024.131172 · Cited by 22 · see citing works

Multiscale numerical modeling of large-format additive manufacturing processes using carbon fiber reinforced polymer for digital twin applications

Castelló-Pedrero, P., García-Gascón, C., & García-Manrique, J. A. (2024) · International Journal of Material Forming · doi:10.1007/s12289-024-01811-5 · Cited by 21 · see citing works

The scientometric analysis and visualization of sustainable procurement

Okonta, E. D. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e20985 · Cited by 25 · see citing works

Optimizing additive manufacturing path pattern for Ti-6Al-4V thin rods using a combinatorial radial basis function surrogate-assisted genetic algorithm

Bai, R., Liang, G., Cheng, H., Naceur, H., Coutellier, D., Zhao, J., Luo, J., Pu, H., & Yi, J. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112447 · Cited by 20 · see citing works

3D‐Printing of Highly Piezoelectric Barium Titanate Polymer Nanocomposites with Surface‐Modified Nanoparticles at Low Loadings

Maturi, M., Migliorini, L., Villa, S. M., Santaniello, T., Delgado, N. F., Molina, S. I., Milani, P., León, A. D. S. D., & Franchini, M. C. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202407077 · Cited by 20 · see citing works

The influence of artificial intelligence and additive manufacturing on sustainable manufacturing practices and their effect on performance

Srivastava, M., Aftab, J., & Tyll, L. (2025) · Sustainable Futures · doi:10.1016/j.sftr.2025.100820 · Cited by 22 · see citing works

Additive Manufacturing for Nanogenerators: Fundamental Mechanisms, Recent Advancements, and Future Prospects

Tian, Z., Tsui, C. P., Tang, Y.-M., Wong, C. H., Tang, C. Y., & Ko, C. (2025) · Nano-Micro Letters · doi:10.1007/s40820-025-01874-2 · Cited by 19 · see citing works

Sustainable Additive Manufacturing in the context of Industry 4.0: a literature review

Bigliardi, B., Bottani, E., Gianatti, E., Monferdini, L., Pini, B., & Petroni, A. (2024) · Procedia Computer Science · doi:10.1016/j.procs.2024.01.076 · Cited by 21 · see citing works

The impact of artificial intelligence on global energy vulnerability

Zhu, Q., Sun, C., Xu, C., & Geng, Q. (2024) · Economic Analysis and Policy · doi:10.1016/j.eap.2024.11.021 · Cited by 20 · see citing works

Effects of Powder Reuse and Particle Size Distribution on Structural Integrity of Ti-6Al-4V Processed via Laser Beam Directed Energy Deposition

Mahtabi, M., Yadollahi, A., Morgan-Barnes, C., Priddy, M. W., & Rhee, H. (2024) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp8050209 · Cited by 18 · see citing works

Review: bio-based photopolymers for additive manufacturing

Sacchi, F., Colucci, G., Bondioli, F., Sangermano, M., & Messori, M. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11107-x · Cited by 19 · see citing works

A hybrid mechanism-based and data-driven approach to forecast energy consumption of fused deposition modelling

Yan, Z., Hui, J., Lv, J., Huisingh, D., Huang, J., Ding, K., Zhang, H., & Liu, Q. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137500 · Cited by 18 · see citing works

Green technologies in smart city multifloor manufacturing clusters: A framework for additive manufacturing management

Deja, A., Ślączka, W., Dzhuguryan, L., Dzhuguryan, T., & Ulewicz, R. (2023) · Production Engineering Archives · doi:10.30657/pea.2023.29.48 · Cited by 18 · see citing works

Surface disinfection change the mechanical, structural and biological properties of flexible materials used for additive manufacturing of medical devices

Kardos, K., Told, R., Péntek, A., Sahai, N., Bánfai, K., Vizi, A., Koltai, A., Szabó, P., Gurdán, Z., Bóvári‐Biri, J., et al. (2024) · Materials & Design · doi:10.1016/j.matdes.2023.112616 · Cited by 18 · see citing works

Optimizing sustainable machining for magnesium alloys: a comparative study of GRA and TOPSIS

Saeed, M. A., Junejo, F., & Amin, I. U. (2024) · Cogent Engineering · doi:10.1080/23311916.2024.2308986 · Cited by 17 · see citing works

A decision-making strategy for selection of FDM-based additively manufactured thermoplastics for industrial applications based on material attributes

Dimitrellou, S., Strantzali, E., & Iakovidis, I. (2025) · Sustainable Futures · doi:10.1016/j.sftr.2025.100640 · Cited by 17 · see citing works

SLM Additive Manufacturing of Oscillating Heat Pipe

Chen, K.-L., Luo, K., Gupta, P., & Kang, S.-W. (2023) · Sustainability · doi:10.3390/su15097538 · Cited by 13 · see citing works

A machine learning approach for predicting flexural strength of 3D printed hexagon lattice-cored sandwich structures

Sivakumar, N. K., Kaaviya, J., Palaniyappan, S., Nandhakumar, G. S., Prakash, C., Basavarajappa, S., Pandiaraj, S., & Hashem, M. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.110230 · Cited by 17 · see citing works

Advances in sustainable additive manufacturing: a systematic review for construction industry to mitigate greenhouse gas emissions

Oladunni, O. J., Lee, C. K. M., Ibrahim, I. D., & Olanrewaju, O. A. (2025) · Frontiers in Built Environment · doi:10.3389/fbuil.2025.1535626 · Cited by 19 · see citing works

Laser-treatment-induced surface integrity modifications of stainless steel

Gong, N., Wei, Y., Meng, T. L., Karyappa, R. B., Cao, J. X., Tan, C. K. I., Suwardi, A., Zhu, Q., & Liu, H. (2023) · Materials Research Express · doi:10.1088/2053-1591/acbe93 · Cited by 17 · see citing works

Additive Manufacturing of WC-Co Specimens with Internal Channels

Sykora, J., Sedlmajer, M., Schubert, T., Merkel, M., Kroft, L., Kučerová, L., & Řehoř, J. (2023) · Materials · doi:10.3390/ma16113907 · Cited by 16 · see citing works

Sustainable 3D printing with recycled tire rubber-based filaments: an investigation of process parameters and mechanical behaviour

Badini, S., Graziosi, S., Carboni, M., Regondi, S., & Pugliese, R. (2024) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2023-0309 · Cited by 16 · see citing works

In-situ monitoring of laser-based powder bed fusion using fringe projection

Remani, A., Rossi, A., Peña, F., Thompson, A., Dardis, J., Jones, N., Senin, N., & Leach, R. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104334 · Cited by 16 · see citing works

Improving fatigue behavior of selective laser melted 316 L stainless steel by ultrasonic-assisted burnishing

Sayadi, D., Rangrizian, H., Khodabandeh, A., Khosrojerdi, M., Khajehzadeh, M., & Razfar, M. R. (2024) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2023-0219 · Cited by 16 · see citing works

A comprehensive review on sustainability in EDM process of additive manufactured materials

Şentürk, E., Alparslan, C., Bayraktar, Ş., Korkmaz, M. E., & Günay, M. (2024) · Measurement · doi:10.1016/j.measurement.2024.116626 · Cited by 16 · see citing works

A framework for integrating sustainable production practices along the product life cycle

Omer, M. A. E., Ibrahim, A. M. M., Elsheikh, A. H., & Hegab, H. A. (2025) · Environmental and Sustainability Indicators · doi:10.1016/j.indic.2025.100606 · Cited by 15 · see citing works

Predictive modeling of additively manufactured carbon fiber-PLA mechanical components via ML

Ozkul, M., Kuncan, F., & Ülkir, O. (2025) · Multidiscipline Modeling in Materials and Structures · doi:10.1108/mmms-12-2024-0387 · Cited by 15 · see citing works

Advanced Refinement of Geopolymer Composites for Enhanced 3D Printing via In-Depth Rheological Insights

Gasmi, A., Pélegris, C., Davidovits, R., Guessasma, M., Tortajada, H., & Jean, F. (2024) · Ceramics · doi:10.3390/ceramics7040087 · Cited by 15 · see citing works

The appealing prospect of hydrogel in 3D/4D printing technology: Overview and opportunities

Alli, Y. A., Anuar, H., Bamisaye, A., Manshor, M. R., Etafo, N. O., Bamidele, M. O., Rasheed, M. A., Olatunde, S. K., Akinfenwa, A. S., & Lawal, A. (2024) · Polymer · doi:10.1016/j.polymer.2024.127823 · Cited by 15 · see citing works

A Machine Learning Approach for Mechanical Component Design Based on Topology Optimization Considering the Restrictions of Additive Manufacturing

Ullah, A., Asami, K., Holtz, L., Röver, T., Azher, K., Bartsch, K., & Emmelmann, C. (2024) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp8050220 · Cited by 14 · see citing works

Exact forming for additive manufacturing using an irregular element-based compensating approach: Simulation, experiment, and detection

Bai, R., Pu, H., Liang, G., Naceur, H., Coutellier, D., Du, Y., Zhao, J., Yi, J., Li, X., Yuan, S., et al. (2023) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2023.2246191 · Cited by 14 · see citing works

Exploring the barriers in medical additive manufacturing from an emerging economy

Verma, V. K., Kamble, S., Ganapathy, L., Mani, V., Belhadi, A., & Shi, Y. (2023) · Production Planning & Control · doi:10.1080/09537287.2023.2275694 · Cited by 14 · see citing works

Significance of Industry 4.0 in Achieving Sustainable Performance Across Supply Chains—A Research Perspective

Govardhan, S., Narkhede, B. E., Raut, R. D., Zhang, L. L., & Ghoshal, S. (2025) · Business Strategy & Development · doi:10.1002/bsd2.70064 · Cited by 14 · see citing works

Neurosymbolic artificial intelligence (NSAI) based algorithm for predicting the impact strength of additive manufactured polylactic acid (PLA) specimens

Mishra, A., & Jatti, V. S. (2023) · Engineering Research Express · doi:10.1088/2631-8695/ace610 · Cited by 13 · see citing works

Acoustic properties of ABS and PLA parts produced by additive manufacturing using different printing parameters

Koç, O. O., Meram, A., Çetin, M. E., & Öztürk, S. (2024) · Materials Testing · doi:10.1515/mt-2023-0333 · Cited by 13 · see citing works

Integrating accounting models with supply chain management in the aerospace industry: A strategic approach to enhancing efficiency and reducing costs in the U.S

Oriji, O., & Joel, O. S. (2024) · World Journal of Advanced Research and Reviews · doi:10.30574/wjarr.2024.21.3.0873 · Cited by 13 · see citing works

Advancing Sustainable Decision Making in Additive Manufacturing: A Comprehensive Review of Multi-Criteria Decision Making Approaches

Alves, A. S. F., Oliveira, J. P., & Godina, R. (2024) · Clean Technologies · doi:10.3390/cleantechnol6020034 · Cited by 13 · see citing works

Machine learning-based approach for predicting the compressive strength of 3D printed hexagon lattice-cored sandwich structures

Sivakumar, N. K., Kaaviya, J., Palaniyappan, S., Mohammed Azeem, P., Basavarajappa, S., Moussa, I. M., & Hashem, M. (2024) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057241270791 · Cited by 13 · see citing works

Understanding the Effects of Manufacturing Attributes on Damage Tolerance of Additively Manufactured Parts and Exploring Synergy Among Process‐Structure‐Properties. A Comprehensive Review

Uddin, Z., Butt, M. M., Kvvssn, V., Salamci, M. U., & Kızıl, H. (2024) · Engineering Reports · doi:10.1002/eng2.13020 · Cited by 13 · see citing works

Welding-based additive manufacturing processes for fabrication of metallic parts

Rathinasuriyan, C., Elumalai, P., Chandar, J. B., Karthik, K., Medapati, S. R., Alahmadi, A. A., Alwetaishi, M., Alzaed, A., Kalam, M. A., & Shahapurkar, K. (2023) · Composites and Advanced Materials · doi:10.1177/26349833231210572 · Cited by 12 · see citing works

Implementation of the additive manufacturing technology towards producing high-performance aerospace components - A review

Ghosh, A., Naiyer, I., Gogoi, B., Goswami, K. M., Sharma, D., Kumar, H., Panda, A., Kumar, R., & Sahoo, A. K. (2024) · AIP conference proceedings · doi:10.1063/5.0193806 · Cited by 12 · see citing works

Advancements in In-Situ Monitoring Technologies for Detecting Process-Induced Defects in the Directed Energy Deposition Process: A Comprehensive Review

Ansari, M. J., Roccisano, A., Arcondoulis, E., Schulz, C., Schläfer, T., & Hall, C. J. (2025) · Materials · doi:10.3390/ma18184304 · Cited by 11 · see citing works

Emerging 3D Printed Polymers and Composites for Water Quality Preservation

Harun‐Ur‐Rashid, M., Imran, A. B., & Susan, M. A. B. H. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00010-7 · Cited by 11 · see citing works

Evaluation of sustainable manufacturing performance – A case illustration with multistakeholder perspective

Xu, S., Murugesan, T. M., Elfar, A. A., & Durairaj, M. P. R. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142368 · Cited by 11 · see citing works

Leveraging Industry 4.0 for Sustainable Manufacturing: A Quantitative Analysis Using FI-RST

Li, Q., Tang, W. F., & Li, Z. (2024) · Applied Sciences · doi:10.3390/app14209545 · Cited by 11 · see citing works

Electron Beam Additive Manufacturing of SS316L with a Stochastic Scan Strategy: Microstructure, Texture Evolution, and Mechanical Properties

Kumar, K. N. C., Sharma, S., Radhakrishnan, M., Randhavan, R., Verma, K. K., Dowden, S., Hughes, Z. W., Banerjee, R., & Dahotre, N. B. (2024) · Metals · doi:10.3390/met14111278 · Cited by 11 · see citing works

Advances in triply periodic minimal surface structures for thermal management systems: A comprehensive review

Wang, H., Zhao, C., Liu, W., Liu, Z., Bian, H., & Zhang, K. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.127481 · Cited by 13 · see citing works

Spark plasma sintering of 13Ni-400 maraging steel: Enhancement of mechanical properties through surface modification

Patil, V. V., Prashanth, K. G., & Mohanty, C. P. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.170734 · Cited by 11 · see citing works

Lost Wax Casting

Alami, A. H., Ayoub, M., Yasin, A., Alashkar, A., Mdallal, A., Khuri, S., Abdulla, S. A., Aljaghoub, H., & Alshemsi, F. (2023) · Resourceedings · doi:10.21625/resourceedings.v3i3.1023 · Cited by 10 · see citing works

Insights into New Trends and Contemporary Challenges in 3D Printing in Architectural Sector

Salvo, S. D. (2024) · Engineering innovations · doi:10.4028/p-vpn0le · Cited by 10 · see citing works

A bibliometric review on application of machine learning in additive manufacturing and practical justification

Ma, Q.-P., Nguyen, H.-S., Hajnyš, J., Měsíček, J., Pagáč, M., & Petrů, J. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102371 · Cited by 10 · see citing works

IoT-Enabled Supply Chain Management From a Customer Perspective: Challenges and Opportunities

Fu, L., Pan, R., Gu, T., Cheng, X., & Zhang, H. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3505412 · Cited by 12 · see citing works

Adopting additive manufacturing: spotlight on sustainability and material utilization

Punia, U., Dhull, S., Habeeb, A., Antil, E., Dahiya, D., Gupta, D., & Ahlawat, A. (2025) · Green Materials · doi:10.1680/jgrma.24.00165 · Cited by 12 · see citing works

Critical successes factors for the adoption of additive manufacturing: Integrated impact for circular economy model

Aslam, J., Saleem, A., Lai, K., & Kim, Y. B. (2025) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2025.124041 · Cited by 10 · see citing works

Compressive fatigue behavior of graded tantalum scaffolds produced by electron beam powder bed fusion

Guo, Y. X., Chen, C., He, W., Cao, Y., Xing, H., Fang, H., Wu, C., & Zhou, K. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.04.235 · Cited by 10 · see citing works

Towards Sustainability in Hydraulic Machinery Manufacturing by 3D Printing

Remache, A., Pérez-Sánchez, M., Hidalgo, V. H., Ramos, H. M., & Sánchez-Romero, F.-J. (2024) · Processes · doi:10.3390/pr12122664 · Cited by 9 · see citing works

Emergy-based method for the sustainability assessment and improvement of additive manufacturing systems

Gao, M., Liu, C., Li, L., Li, Q., Wang, Q., & Liu, Z. (2023) · Energy · doi:10.1016/j.energy.2023.130115 · Cited by 9 · see citing works

Additive manufacturing for sustainable industrial systems

Verma, P. K., & Vasudev, H. (2026) · CRC Press eBooks · doi:10.1201/9781003792093-17

The benefits of additive manufacturing for sustainable design and production

Mehrpouya, M., Vosooghnia, A., Dehghanghadikolaei, A., & Fotovvati, B. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-818115-7.00009-2 · Cited by 92 · see citing works

Additive manufacturing for sustainability: A systematic literature review

Agnusdei, L., & Prete, A. D. (2022) · Sustainable Futures · doi:10.1016/j.sftr.2022.100098 · Cited by 84 · see citing works

Achieving sustainability by additive manufacturing: a state-of-the-art review and perspectives

Su, J., Ng, W.-L., An, J., Yeong, W., Chee, K.-C., & Sing, S. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2438899 · Cited by 121 · see citing works

Strategic sustainability in additive manufacturing: A comprehensive review

Fidan, I., Mahmudov, M., Gee, K., Hart, A. J., Naikwadi, V., Hudson, E., & Hasanov, S. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-17666-w · Cited by 3 · see citing works