CoChat

Analysis of Liquid Products from Biomass via Flash Pyrolysis

Demirbaş, Ayhan · 2002 · Energy Sources

The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.

Abstract

Flash pyrolysis products from tobacco stalk and yellow pine wood obtained in a pyrolysis apparatus were analyzed. Comparison of pyrolytic products' structural components indicates the origin of each product. Methanol mainly arises from methoxyl groups of uronic acid and from the breakdown of methyl esters and/or ethers from decomposition of pectin-like plant materials. Acetic acid comes from the elimination of acetyl groups originally linked to the xylose unit. The yields of char products from the tobacco stalk and yellow pine wood samples decreased from 33.9% to 23.0% and from 29.2% to 17.0% when final pyrolysis temperature was increased from 675 to 1025 K, respectively. The yields of gaseous products from the tobacco stalk and yellow pine wood samples increased from 25.0% to 40.2% and from 29.7% to 42.5% when final pyrolysis temperature was increased from 675 to 1025 K, respectively. The yields of liquid products from both samples increased with increasing temperature from 675 to 875 K and then decreased. The maximum yields from the tobacco stalk and yellow pine wood samples were 43.0% and 48.7% at 875 K, respectively. The maximum yield of liquid product from the tobacco stalk was 44.5% at 775 K for a 40% Na 2 CO 3 run. Increases and decreases of the yields of liquid products for the tobacco stalk samples were considerably irregular. The maximum yield of liquid product from the yellow pine wood was 44.6% at 775 K for a 50% Na 2 CO 3 run. The maximum yields of acetic acid from yellow pine for nonalkali and alkali runs were 13.85% and 16.58% at 825 K, respectively. The maximum yields of methanol from tea waste for nonalkali and alkali runs were 6.42% and 8.81% at 875 K, respectively. The yields of 1-hydroxy-2-propanone from yellow pine for nonalkali and alkali runs increased from 7.32% to 10.81% and from 7.40% to 12.13% when pyrolysis temperature was increased from 675 to 875 K, respectively.

Overview

Integrity signals

Registry

Crossref · 10.1080/00908310252888718

Cites

12 of 12 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 12 references

Research works printed but not linked: 10

  1. Akdeniz F., 1998, Energy Edu. Sci Technol., 2, 17
  2. Beaumont O., 1985, Wood Fiber Sd., 17, 228
  3. Cuff D. J., 1980, U.S. Energy Atlas
  4. Demirbas A., 1998, Energy Edu. Sci. Technol., 2, 23
  5. Demirbas A., 2000, Energy Edu. Sci Technol., 5, 21
  6. Demirbas A., 2000, Energy Edu. Sci Technol., 6, 77
  7. Demirbas A., 1998, Energy Edu. Sci Technol., 1, 111
  8. Demirbas A., 1999, Energy Edu. Sci Technol., 2, 109
  9. Goldstein, I. S. 1981. Organic Chemical from Biomass , 13Boca Raton, FL: CRC Press.
  10. Kücük M. M., 1999, Energy Edit. Sci. Technol., 2, 62

Cited by

See all 69

Metadata

Authors
Demirbaş, A.
Corresponding author
Demirbaş, Ayhan
Venue
Energy Sources
Published
2002-04
Volume
24
Issue
4
Pages
337-345
ISSN
  • 0090-8312 (ISSN-L)
  • 1521-0510
OpenAlex
W2062071584
Cited by
66
References
11
Citations by year
2026: 2 · 2025: 2 · 2024: 2 · 2023: 3 · 2022: 7 · 2021: 8 · 2020: 5 · 2019: 1 · 2018: 2 · 2017: 3 · 2015: 2 · 2014: 1 · 2012: 2
FWCI
1.19
Type
journal article
Language
en
Open access
closed
Locations
Energy Sources (publishedVersion)
Topics
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
  • Physical Sciences › Energy › Fuel Technology › Mining and Gasification Technologies
Keywords
flash pyrolysis, biomass pyrolysis, liquid products, tobacco stalks, tea waste, pyrolysis temperature, alkaline pretreatment, sodium carbonate, methanol, acetic acid, char yield, pyrolysis gas yield, pyrolysis oil yield

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Analysis of Liquid Products from Biomass via Flash Pyrolysis. https://app.cochat.ai/papers/10.1080/00908310252888718
The paper
Demirbaş, A. (2002). Analysis of Liquid Products from Biomass via Flash Pyrolysis. Energy Sources. https://doi.org/10.1080/00908310252888718

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.