The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Structural defects in amorphous solids Statistical analysis of a computer model
Abstract
The possibility of defining structural defects in amorphous solids in terms of parameters such as atomic-level internal stresses and local symmetry coefficients was proposed in a previous paper (Egami, Maeda and Vitek 1980). Using a model amorphous structure generated by a computer, these parameters are statistically analysed in the present paper. It is shown that the stress and the symmetry coefficients are closely correlated and that spatial correlations of various kinds exist. The structural defects are then defined as regions in which the corresponding characterizing parameter deviates significantly from its average value. Two distinct classes of defects were found; (i) positive (p-type defects) and negative (n-type defects) local density fluctuations; and (ii) regions of large shear stresses and large deviations from spherical symmetry. Defects consisting of pairs of p-type and n-type defects separated by regions of large shear stresses are also common. The effect of annihilation of p- and n-type defects on the radial distribution function was further studied, and it was shown that the effect is similar to that experimentally observed when annealing an amorphous alloy at temperatures below the glass transition temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamical Theory of Crystal Lattices
Born, M., Huang, K., & Lax, M. (1955) · American Journal of Physics · doi:10.1119/1.1934059 · Cited by 10,501
Molecular Transport in Liquids and Glasses
Cohen, M. H., & Turnbull, D. (1959) · The Journal of Chemical Physics · doi:10.1063/1.1730566 · Cited by 3,959
A microscopic mechanism for steady state inhomogeneous flow in metallic glasses
Spaepen, F. (1977) · Acta Metallurgica · doi:10.1016/0001-6160(77)90232-2 · Cited by 2,933
Voronoi, G. (1908) · Journal für die reine und angewandte Mathematik (Crelles Journal) · doi:10.1515/crll.1908.134.198 · Cited by 2,248
Studies in Newtonian Flow. II. The Dependence of the Viscosity of Liquids on Free-Space
Doolittle, A. K. (1951) · Journal of Applied Physics · doi:10.1063/1.1699894 · Cited by 1,831
Free-Volume Model of the Amorphous Phase: Glass Transition
Turnbull, D., & Cohen, M. H. (1961) · The Journal of Chemical Physics · doi:10.1063/1.1731549 · Cited by 1,299
The Bakerian Lecture, 1962 The structure of liquids
(1964) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1964.0147 · Cited by 1,031
Interstitials and Vacancies inαIron
Johnson, R. A. (1964) · Physical Review · doi:10.1103/physrev.134.a1329 · Cited by 723
Structural defects in amorphous solids A computer simulation study
Egami, T., Maeda, K., & Vitek, V. (1980) · Philosophical Magazine A · doi:10.1080/01418618008243894 · Cited by 411
Self-citationFree volume theories of the glass transition and the special case of metallic glasses
Ramachandrarao, P., Cantor, B., & Cahn, R. W. (1977) · Journal of Materials Science · doi:10.1007/bf00553936 · Cited by 112
Cited by
Mechanical behavior of amorphous alloys
SCHUH, C., HUFNAGEL, T., & RAMAMURTY, U. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.01.052 · Cited by 3,372
Atomic-level structure and structure–property relationship in metallic glasses
Cheng, Y. Q., & Ma, E. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2010.12.002 · Cited by 1,771
Structural heterogeneities and mechanical behavior of amorphous alloys
Qiao, J. C., Wang, Q., Pelletier, J. M., Kato, H., Casalini, R., Crespo, D., Pineda, E., Yao, Y., & Yang, Y. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.04.005 · Cited by 659
A new look at the atomic level virial stress: On continuum-molecular system equivalence
Zhou, M. (2003) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2003.1127 · Cited by 569
Local elastic properties of a metallic glass
Wagner, H., Bedorf, D., Küchemann, S., Schwabe, M., Zhang, B., Arnold, W., & Samwer, K. (2011) · Nature Materials · doi:10.1038/nmat3024 · Cited by 433
Metadata
- Authors
- Srolovitz, D., Maeda, K., Vitek, V., & Egami, T.
- Venue
- Philosophical Magazine A
- Publisher
- Informa UK Limited
- Published
- 1981-10
- Volume
- 44
- Issue
- 4
- Pages
- 847-866
- ISSN
- 0141-8610 (ISSN-L)
- 1460-6992
- OpenAlex
- W1981910788
- Cited by
- 293
- References
- 11
- FWCI
- 25.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structural defects in amorphous solids Statistical analysis of a computer model. https://app.cochat.ai/papers/10.1080/01418618108239553
- The paper
- Srolovitz, D., Maeda, K., Vitek, V., & Egami, T. (1981). Structural defects in amorphous solids Statistical analysis of a computer model. Philosophical Magazine A. https://doi.org/10.1080/01418618108239553
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.