The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Effect of Surface Roughness on Heat Transfer and Fluid Flow Characteristics at Low Reynolds Numbers in Small Diameter Tubes
Abstract
The effect of surface roughness on pressure drop and heat transfer in circular tubes has been extensively studied in literature. The pioneering work of Nikuradse [1] established the sand grain roughness as a major parameter in defining the friction factor during laminar and turbulent flows. Recent studies have indicated a transition to turbulent flows at Reynolds number values much below 2300 during single-phase flow in channels with small hydraulic diameters. In the present work, a detailed experimental study is undertaken to investigate the roughness effects in small diameter tubes. The roughness of the inside tube surface is changed by etching it with an acid solution. Two tubes of 1.032 mm and 0.62 mm inner diameter are treated with acid solutions to provide three different roughness values for each tube. The Reynolds number range for the tests is 500-2600 for 1.067 mm tube and 900-3000 for 0.62 mm tube.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peiyi, W., & Little, W. A. (1983) · Cryogenics · doi:10.1016/0011-2275(83)90150-9 · Cited by 520
FRICTIONAL FLOW CHARACTERISTICS OF WATER FLOWING THROUGH RECTANGULAR MICROCHANNELS
Peng, X. F., Peterson, G. P., & Wang, B. X. (1994) · Experimental Heat Transfer · doi:10.1080/08916159408946484 · Cited by 381
Developing convective heat transfer in deep rectangular microchannels
Harms, T. M., Kazmierczak, M. J., & Gerner, F. M. (1999) · International Journal of Heat and Fluid Flow · doi:10.1016/s0142-727x(98)10055-3 · Cited by 369
Wu, P., & Little, W. A. (1984) · Cryogenics · doi:10.1016/0011-2275(84)90015-8 · Cited by 317
Recherches expérimentales relatives au mouvement de l'eau dans les tuyaux
Darcy, H. (1857) · Cited by 162
Rahman, M. M., & Gui, F. (1993) · Cited by 69
Cited by
Single-phase convective heat transfer in microchannels: a review of experimental results
Morini, G. L. (2004) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2004.01.003 · Cited by 679
Kandlikar, S. G. (2012) · Journal of Heat Transfer · doi:10.1115/1.4005126 · Cited by 389
Self-citationHetsroni, G., Mosyak, A., Pogrebnyak, E., & Yarin, L. P. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.12.019 · Cited by 308
Heat Transfer in Microchannels—2012 Status and Research Needs
Kandlikar, S. G., Colin, S., Peles, Y., Garimella, S., Pease, R. F., Brandner, J. J., & Tuckerman, D. B. (2013) · Journal of Heat Transfer · doi:10.1115/1.4024354 · Cited by 285
Self-citationA critical review of two-phase flow in gas flow channels of proton exchange membrane fuel cells
Anderson, R., Zhang, L., Ding, Y., Blanco, M., Bi, X., & Wilkinson, D. P. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.12.123 · Cited by 276
Metadata
- Authors
- Kandlikar, S. G., Joshi, S., & Tian, S.
- Venue
- Heat Transfer Engineering
- Publisher
- Informa UK Limited
- Published
- 2003-05
- Volume
- 24
- Issue
- 3
- Pages
- 4-16
- ISSN
- 0145-7632 (ISSN-L)
- 1521-0537
- OpenAlex
- W2133981918
- Cited by
- 288
- References
- 6
- FWCI
- 26.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.